Stroj za polnjenje in tesnjenje obrazcev

ISY PACK GmbH VM2-MC365

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, NAPRAVA CAP 30 APPLICATOR 1000 SLIM ZA HELICAP 23 PRO: LETNIK 2019 VERZIJA 400 V 9.000 UR OBRAČANJA Blodpeyynd Rofx Aiqon NOVO STANJE

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Tip: SBO 4 S1 Bledpfx Aijwa Rhrsqon Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW V kompletu kalupi za 1,5 L Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: rabljeno, prevoženi kilometri: 19.950 km, prva registracija: 11/1989, vrsta goriva: dizel, konfiguracija osi: 4x4, vrsta prenosa: mehanski, Leto izdelave: 1989, Oprema: pogon na vsa štiri kolesa, Mercedes-Benz 1428 AF 4x4 (center and rear axle differential locks, low-range gearing) with 7 seats Water tank: 2,500 liters Pump: Metz with 2,800 l/min capacity Blodpfxofarx Uj Aiqsn Additional equipment: Rapid intervention hose reel on right side with 50-meter hose Dimensions (LxWxH): 7,100 x 2,300 x 3,000 mm Wheelbase: 3,800 mm Tires: 275/70 R22.5

Leto izdelave: 2017, stanje: generalkompletno obnovljen (rabljeno), ROLL CONTAINER ROLLER TROLLEY 3-side for FIREWOOD 155 cm 1 ROLLER TROLLEY 810 x 720 mm Height approx. 155 cm Item no. RW-3155 / 3-sided Other models shown for comparison only We manufacture CUSTOM SIZES and repair roll containers/roller trolleys. Please inquire for specific heights. Side mesh panels in blue, rear panel in blue, Roller base in various colors Ideally suited as: Firewood trolley; yellow sack collection; standard crates such as E2 crates and others with dimensions 60 x 40 cm; transport trolley; storeroom trolley; storage rack, etc. Each roll container includes: Base with 4 wheels (2 fixed, 2 swivel), Base/plate in various colors, 2 side grids in perfect condition + rear panel, Including 4 connecting clamps & mounting hardware Weight: approx. 27 kg per trolley Offer includes only the roll container, height 155 cm. Other trolleys not included (pictures for illustration) Price per unit €69.00 plus VAT applicable at the time of purchase. Price is per item for a purchase of 1 roll container. Inspection possible by appointment. Item is in good optical and technical condition (refurbished). Extremely robust & loadable up to 500 kg. COLLECTION after prior notification from warehouse 47441 Moers possible. (Due to large stock, goods can be inspected on site.) For inquiries about this item, please provide your telephone number due to limited time availability. If you require shipping, please contact us before purchase to discuss shipping costs. Bsdod Syhgspfx Aiqsln Photos similar to actual product.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! Bsdpfxjw U N Ixs Aiqoln As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: dober (rabljeno), MKT Ost-PrePress-Linie in gutem Zustand, Kapazität 12.000 L Bledpfx Aish E Dpieqjn Bitte kontaktieren Sie uns für weitere Informationen.

Leto izdelave: 2013, stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Bodpsxw N Uvjfx Aiqjln Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg.

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm Bsdpfsv Tpxqex Aiqsln - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Leto izdelave: 2025, stanje: novo, Automatic powder filler and lid sealer for small containers such as coffee capsules. - Suitable for filling powdered products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into various capsule-shaped container sizes/forms (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with/without filter, etc.) with subsequent sealing. Automated filling and dosing via auger doser. UV sterilization system, ionizer, and dust extraction system for cavity formats included. Automatic film feed and double heat sealing of the lid. - Specifications: • Maximum idle speed: 90 cups/minute • Filling range: 0-20g • Filling accuracy: +/- 0.15g • Hopper capacity: 10L (approx. 6kg powder) • Power supply and consumption: 3-phase, 220V, 7.5kW • Required compressed air and flow rate: 6-8 bar, approx. 300L/min • Protective gas flow rate: approx. 200L/min • Machine dimensions: L3420xW2200xH2688mm Bedpfx Aev Nkz Eoiqoln • Weight: 900kg The specifications refer to Nespresso capsules; deviations may occur with capsules from other brands. Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and share your packaging requirements with us. – We generally have 30–50 different new machines immediately available from stock. For machines requiring customer-specific manufacturing, we offer very short delivery times starting from around 3 weeks. – All machines are available with a full warranty.

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Bjdpfx Aoutni Rjiqjln Comes with comprehensive and original technical documentation.