Laserski stroj za rezanje

IPG, MaxPhotonics, Raycus...Fiber Cable

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Hjdod Ixadjpfx Af Tjfb Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Hsdpfx Afsd Ev Ups Tsfb Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Hfodpfx Aet Hw Shef Tsb Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Hfsdpfx Aod Hintof Teb Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 031EP-2020, Ref. No. 24558 Technical Data: - Abrasive diameter: 150 mm - Grinding unit can be swiveled on articulated arm - Swivel radius of grinding arm: 2,000 mm - Motorized dust extraction Hsdpsvazz Dofx Af Tjfb - Disc speed steplessly adjustable: 800 – 2,200 rpm - Table dimensions: 1,500 x 880 mm - Table height approx.: 920 mm - Drive: 400 V / 3.6 kW - Space requirement approx.: W 1,600 x H 1,600 x D 1,600 mm - Weight approx.: 250 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, Nudimo storitve popravila laserskih virov vseh vrst IPG laserjev. Okvarjene laserske module zamenjamo z obnovljenimi, popolnoma delujočimi rezervnimi deli, izvedemo vse potrebne nastavitve in poskrbimo, da vaš vlakenski laser ponovno nemoteno deluje! Ne glede na težavo z vašim IPG laserskim virom, ga ponovno usposobimo. Poleg IPG virov popravljamo tudi Max Photonics, Raycus in druge laserske vire – z več kot 10-letnimi izkušnjami v industriji vlakenskih laserjev. Hedswf Hxqjpfx Af Tofb

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 800 mm, najv. debelina pločevine: 120 mm, višina obdelovanca (maks.): 120 mm, širina brušenja: 800 mm, The grinding and deburring machine provides an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent results by rounding the edges and removing burrs, leading to a significantly improved surface quality. Utilizing state-of-the-art technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. User-friendly operation combined with a robust design ensures seamless integration into your production processes. Hedpfx Afsulauvs Tsfb With our grinding and deburring machine, you not only optimize processing times but also increase the precision and durability of your products. Benefit from superior processing quality and boost your efficiency in production.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, hitrost pomika os X: 4 m/min, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 102 mm, skupna dolžina: 2.300 mm, skupna širina: 2.600 mm, skupna višina: 2.500 mm, skupna masa: 4.000 kg, delovna višina: 950 mm, dolžina obdelovanca (maks.): 102 mm, Double-sided deburring in just one pass – with 100% reproducible results and precise processing of both internal and external edges: only the EdgeRacer 1500 D offers this. Hjdsucw Rbopfx Af Tofb The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brushes working from above and below can be adjusted independently. Thanks to the roller conveyor, the adjustment can also take place below or above roller table level.

Stanje: rabljeno, Leto izdelave: 2017, Robotska celica ABB s čistilnim laserjem Clean Laser Proizvajalec: ABB / Clean Laser Tip: IRB4600 Leto izdelave: 2017 Sistem sestavljajo: Robot ABB IRB4600 Krmilna omara Ročna upravljalna naprava Hfedpswrcn Usfx Af Teb Naprava za lasersko čiščenje Clean Laser tip intelliScan30 Odsesalna naprava TEKA 101225ä

Stanje: novo, Stroj za odstranjevanje robov pločevine, podoben Timesaverju Hfedsxt Dvyepfx Af Tsb