Laserski stroj za rezanje

IPG Fiber Laser Module YLS, YLR, YLM, YLP,...

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Bcedpfsd Ev Upjx Ag Tjw Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. Bsdpfed Ixadsx Ag Tjcw A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, The press brake was manufactured in 1994. Working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Bjdpfxjp R Irco Ag Tocw Pressing force: 600 kN Weight: 4000 kg Power: 10 kW

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, skupna masa: 22.800 kg, stiskalna sila: 250 t, CNC Press Brake Bedpfxer Sxq Re Ag Tscw Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Back gauge, Type 2 - Front bending aid (disassembled for transport) - DNC 900PS control system All documentation for the machine is available.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, CNC BAYKAL Hybrid-Abkantpressen vereinen alle Vorteile von hydraulischen und vollelektrischen Abkantpressen in einer Maschine. Wenn Sie eine Abkantpresse suchen, die schnell, präzise und energieeffizient arbeitet, ist BAYKAL die richtige Wahl. Bodpfx Ajrq D Nieg Tscw Die CNC BAYKAL Hybrid-Abkantpressen ermöglichen signifikante Energieeinsparungen, reduzieren den Kraftstoffverbrauch, steigern die Biegeleistung, minimieren das Risiko von Ölleckagen, senken die Installationskosten, verlängern die Lebensdauer der Verschleißteile, erhöhen die Biegenauigkeit, verringern das Betriebsgeräusch und verbessern das Arbeitsumfeld. Das CNC BAYKAL Hybrid-Abkantpressensystem ist mit einem individuellen elektrohydraulischen Servoantrieb und Servopumpen ausgestattet, die getrennt die linke und rechte Zylinderseite steuern. Der Servomotor regelt den Förderstrom der Ölpumpe entsprechend der Programmvorgabe und steuert so die Geschwindigkeit sowie die Positionsgenauigkeit des Pressbalkens; während des gesamten Prozesses tritt dabei kein Drosselphänomen auf. Dadurch steht die von der Ölpumpe erzeugte Energie vollständig den beiden Hydraulikzylindern zur Verfügung. Diese Steuerungsmethode verursacht keinerlei Energieverluste und die Energieeinsparungswirkung ist besonders deutlich. Das System sorgt dafür, dass die Hydraulik nur bei Betätigung des Fußpedals arbeitet – die Pumpe läuft nicht dauerhaft, wie bei herkömmlichen Hydrauliksystemen. Dies führt zu einem geringeren Energieverbrauch, schnelleren Zykluszeiten und höchster Präzision im Vergleich zu Standard-Hydraulikmaschinen. Der Förderstrom und der Druck der Y1- und Y2-Hydraulikzylinder werden jeweils durch zwei Servobidirektional-Pumpensysteme geregelt, wobei das Öl des oberen Zylinders direkt durch die Pumpe in den unteren Zylinderraum geleitet wird, um das Anheben des Pressbalkens zu realisieren. Durch die Umkehrung der Drehrichtung der Pumpe wird das Öl aus dem unteren Zylinderraum gepumpt, um die Abwärtsbewegung und das Biegen mit dem Oberwerkzeug zu ermöglichen. Einsatzbereich von 100 bis 1.250 Tonnen – die Synchronisation der linken und rechten Seite des Oberbalkens bei den CNC BAYKAL Hybrid-Abkantpressen wird jeweils separat durch zwei Servobidirektional-Pumpensysteme kontrolliert.

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Bjdpfx Aget Hw Shj Tocw Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Hydraulic synchronized press brake MECOS Mod. Syncro 200/4000. CNC Control ESA KVARA. No. 07 controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) Automatic WILA crowning system. Bcodpfx Aev S Ad Reg Tow Pneumatic tool clamping: Promecam type, Tecnostamp H=150 mm. Useful bending length: 4050 mm. Pressing force: 200 tons. Front safety devices: DSP LASER. Weight: 24,000 kg.

Stanje: rabljeno, System: Used decanter / centrifuge Manufacturer: Flottweg Model: Full-jacket scroll centrifuge Type: Z73-4/454 Machine no.: 010.014.04 Year of manufacture: 1999 Bcedpfxsppa Tcs Ag Tsw Bowl: max. speed 2800 rpm Permissible sediment density: 1.3 kg/dm³

Stanje: novo, Leto izdelave: 2025, potovalna razdalja osi X: 1.520 mm, pomik osi Y: 3.030 mm, pomik po osi Z: 300 mm, teža obdelovanca (maks.): 10.600 kg, skupna dolžina: 10.100 mm, skupna širina: 2.500 mm, skupna višina: 4.500 mm, Maximale Bearbeitungsgröße: 3000×1500 mm Bcodpsv Awlqsfx Ag Tsw Maximale Schnittstärke: Kann Außendurchmesser von φ10–220 mm aufnehmen (Empfohlen: Rundrohr φ40–200 mm, Vierkantrohr: □40–200 mm), Gewicht 20 kg/m Rohrschneidetyp: 6 Meter automatisches Spannfutter Maximale kombinierte Geschwindigkeit: 150 m/min Beschleunigung: 2,5 G

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. Bcodpjd Hintefx Ag Tew The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300