Večvretenska orodja

INDEX MS 32 C

Stanje: rabljeno, CNC večvretenski avtomatski stružnik INDEX MS32C Ledpfxoxt U Hpo Abbjrg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Lrsdpovtancofx Abbog Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije.

Stanje: rabljeno, CNC večvretenski avtomatski stružnik INDEX MS32C Lodpfx Abjxma Npsbjrg

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm Lrodpfx Abjuhavdsbog - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CNC Siemens 840D - Counter spindle - Dual operator console - Dual NCU - Bar feeder: IEMCA SIR MS32 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: Riedel WTS 030.02-NE - Discharge system with 2 CNC axes - Fire extinguishing system: KRAFT UND BAUER *Note: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Lodpfxev Scrbe Abbsrg

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, individually controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 CNC axes - Slide unit 1.1: X and Z axes NC controlled - Slide unit 1.2: fixed X axis, Z axis NC controlled - Slide unit 2.1: fixed X axis, Z axis NC controlled - Slide unit 2.2: X and Z axes NC controlled - Slide unit 3.1: X and Z axes NC controlled - Slide unit 3.2: fixed X axis, Z axis NC controlled - Slide unit 4.1: X and Z axes NC controlled - Slide unit 4.2: fixed X axis, Z axis NC controlled - Slide unit 5.1: fixed X axis, Z axis NC controlled - Slide unit 5.2: X and Z axes NC controlled - Slide unit 6.1: X and Z axes NC controlled - Slide unit 6.2: X and Z axes NC controlled - Counter spindle in position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder: IEMCA SIR MS32/33/P - Oil unit with high-pressure pump - Chip conveyor: KNOLL - Workpiece ejection with conveyor at position 6 Lrsdpfsuhaxlox Abbjg - Cross drilling units at positions 3.1 and 4.1

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Lodpfx Ajuhaqbobborg

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely Ljdpfx Abeul Efmoborg adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT Lrsdpfeuhauyjx Abbsg - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: rabljeno, TECHNICAL DATA Ljdpfx Abouhangsborg - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes NC-controlled - Slide unit 1.2: fixed X-axis, Z-axis NC-controlled - Slide unit 2.1: fixed X-axis, Z-axis NC-controlled - Slide unit 2.2: X and Z axes NC-controlled - Slide unit 3.1: X and Z axes NC-controlled - Slide unit 3.2: fixed X-axis, Z-axis NC-controlled - Slide unit 4.1: X and Z axes NC-controlled - Slide unit 4.2: fixed X-axis, Z-axis NC-controlled - Slide unit 5.1: fixed X-axis, Z-axis NC-controlled - Slide unit 5.2: X and Z axes NC-controlled - Slide unit 6.1: X and Z axes NC-controlled - Slide unit 6.2: X and Z axes NC-controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar feeder: IEMCA SIR MS32/33/P - Oil supply unit with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: RIEDEL - Workpiece ejection with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Lrodpfxjt E Dbyj Abbjg Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.