Enota za rezkanje

IMA

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Lhjdewmm Nropfx Abbob

Stanje: zelo dobro (rabljeno), TECHNICAL DATA NOT OF THIS MACHINE RETURN DEVICE for Edge Banding Machine (LEFT) In combination with a single-sided edge banding machine, this allows a single operator to consistently feed the machine. Air curtain table, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Lhjdpfsff R Tqjx Abbsb Motorized conveyor belt (9080 x 1560 mm) Panel dimensions (MIN/MAX): Length – 240 mm / 2800 mm Width – 120 mm / 1300 mm Thickness – 8 mm / 60 mm, optional up to 100 mm

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine in full configuration, including a total of 3 interchangeable gluing units, 1 of which is for PUR adhesive. Material dimensions: Ljdpjybbayjfx Abbjhb Roll materials: - Paper and plastic edging 0.3 - 3.0 mm - Veneer edging: 0.5 - 3.0 mm - Strips 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine equipment: Infeed fence, adjustment automatic via program Separation agent application unit Jointing milling unit with 2 motors, each 4 kW Air nozzle for removing loose particles Gluing unit with glue container 1.8 L, with QUICK-LOCK system with single roll / strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors 660 W, swiveling 0 to 8 degrees Profile trimming unit with 2 motors 180 W and 2 motors 400 W max. workpiece thickness 60 mm max. feed speed 20 m/min. Automatic adjustment via program Profile scraper unit Glue joint scraper unit Cleaning agent application unit Buffing unit with 2 motors 180 W Control: ICOS open TS, PC-based

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 19.714 h, Ta IMA Advantage 550 je bila izdelana leta 2010. Rabljeni enostranski robni lepilni stroj z agregatom za spajanje, grelnikom, EVA lepilnim agregatom in magazinom za robni material v roli. Opremljen je z enoto za rezanje, zgornjo/spodnjo rezkalno enoto za poravnavo in profilnim strgalom. Stroj ponuja podajalno hitrost 20 m/min, kar je idealno za učinkovito proizvodnjo. Izkoristite priložnost za nakup tega robnega lepilnega stroja IMA Advantage 550. Za več informacij nas kontaktirajte. Dodatna oprema • Enota za spajanje robov (fugenschneider) • Grelnik • EVA lepilni agregat • Magazinska enota za robne trakove v roli • Rezalna enota • Zgornje/spodnje poravnalna rezkalna enota • MFA z 2 motorjema za radij r2, servo krmiljenje • Profilno strgalo • Površinski strgalnik • Polirni agregat (schwabbelaggregat) Prednosti stroja Tehnične prednosti stroja • Podajalna hitrost: 20 m/min Ljdpfeyaqbwox Abbehb Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: rabljeno, prevoženi kilometri: 352.760 km, moč: 180 kW (244,73 KM), prva registracija: 11/2006, vrsta goriva: dizel, največja dovoljena obremenitev: 3.070 kg, skupna masa: 6.500 kg, Za informacije Lhjdpjvii Tyefx Abbsb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 100 mm, največja hitrost vretena: 24.000 obr/min, število osi: 3, Ta IMA BIMA 410 V je bila izdelana leta 2005. Gre za CNC obdelovalni center za les z integriranim enoto za obrobljanje robov. Značilnosti vključujejo delovno območje osi X do 6000 mm, osi Y 1400 mm in osi Z do 100 mm. Glavna moč vretena je 7,5-11 kW, z razponom vrtljajev od 1.500 do 24.000 min⁻¹. Menjalnik orodij ima 18 pozicij. Možnosti obdelave robov pokrivajo debeline od 0,4 do 3 mm. Za več informacij nas kontaktirajte. Prednosti stroja Lhodpfoyap U Asx Abbsb Tehnične prednosti stroja • Avtomatski rotacijski menjalnik, 18 pozicij • Vertikalna vrtalna glava z do 21 vreteni (11+10) Dodatne informacije Obrobljalni stroj VT 100 Za štiristransko in čelno obdelavo robov Debelina robu: 0,4-3 mm Višina robu: 14-64 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, This IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine was manufactured in 2012. It features a robust automatic edge banding and finishing system, including a workpiece return system for increased productivity. It is capable of processing edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-release system and electronic temperature control for precise glue application. Consider purchasing this IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine. Contact us for further information. Additional Equipment • Hinged milling unit: 2 motors, each 4.0 kW, 8800 rpm Lhsdox U U D Topfx Abbob • Heating unit: Preheating of workpiece edges up to 60 mm • Glue application: Processing of edges up to 3 mm • End trimming unit: 2 motors, 660 kW • Additional units: Milling, multi-profile milling, contour milling, multi-profile scraper and scraper; buffing unit • Automatic Quickmelt hot melt glue feed • Board return system with powered roller conveyors, cross conveyor, belt conveyor, angle transfer, air cushion tables, and safety fence Machine Advantages Technical Advantages • Minimum workpiece length: 150 mm / minimum workpiece width: 65 mm / minimum workpiece thickness: 8 mm / maximum workpiece thickness: 60 mm / smallest workpiece: 150 mm x 150 mm or 65 mm x 300 mm Additional Information This machine is configured for efficient edge banding and finishing, featuring robust functions and support for various workpiece sizes. It is immediately available for production use.

Stanje: rabljeno, Leto izdelave: 2010, Touchscreen control for adjusting work groups Panel thickness from 10 to 50 mm Solid wood 12 mm PVC/ABS edging from 0.4 to 3 mm Feed speed up to 22 m/min Lodpepzfcgofx Abbohb Minimum panel length 150 mm Minimum panel width 70 mm Electronically adjustable working height by CNC Motorized rubber-coated belt with superior pressure Panel support guide Side roller conveyor with idle rollers for panel support Anti-adhesive unit Rectifier unit with two 1.5 kW motors each Roller holder plate COMBIMELT adhesive application unit for hot melt glue with automatic VarioMelt dosing and pre-melter Patented edge pressure unit with segmented pads Pre-milling unit with 2 motors Trimming unit with 2 motors Corner rounding unit Edge scraper unit Installed power 13.7 kW Machine length approx. 6170 mm TECHNICAL DETAILS MUST BE VERIFIED

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine. Machine Benefits Technical Machine Advantages • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Edge machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: particleboard, MDF • Surface material: direct coating (melamine resin paper), paper, foil, veneer Additional Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Prefabricated edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Ledpfx Abox U U Dtobjhb Edge profiles: Paper edge: Approx. 0.4 mm, 15° chamfer Plastic edge up to 3.0 mm, depending on radius tool Milling strips flush up to 8 mm Machine Constant workpiece projection from chain track: 35 mm + edge thickness Max. cut cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Base height (top edge of chain track): 940 mm Unit side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Jointing unit 08.379 and air nozzle 2 motors, each 4 kW, 9000 rpm Gluing unit 283.1513 Glue reservoir 0.8 l, 60 mm high Suitable for hot-melt or PUR adhesive With individual roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 auxiliary pressure rollers Cutting unit 08.415 Pneumatically swiveling to 0° or 8° 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy milling unit SKF-L 4 motors, 12,000 rpm Profile length in feed direction: max. approx. 50 mm Workpiece thickness: max. 60 mm Working speed: max. approx. 20 m/min Distance between 2 workpieces: min. approx. 400 mm Profile drawknife 08.519 For post-scraping of an upper and lower milled quarter-circle profile Self-tracing drawknife unit 08.521 For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces Buffing unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 1.200 mm, skupna masa: 7.200 kg, največja hitrost vretena: 15.000 obr/min, This IMA BIMA CUT 120/240 was manufactured in 2003. It is a CNC woodworking center with a working area of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. The machine features a main spindle with HSK F63 tool holder and a drive power of 7.5 kW. Additionally, it is equipped with a tool changer magazine holding 18 tools and offers a wide range of drilling and milling capabilities. Contact us for more information about this machine. Machine Advantages Quality Features • Drive power: 7.5 kW in S1 mode • Spindle lubrication: permanent grease lubrication from factory • Spindle cooling: water cooling • The automatic tool/adapter changer magazine features a disk changer design with 18 coded magazine slots and moves with the support along the X axis. • The adapter units include a sawing unit (max. 15,000 rpm, 200 mm blade), a horizontal drilling and milling head with 4 spindles (max. 15,000 rpm), a drilling unit for lock cases or sash holes (max. 12,000 rpm), a vertical drilling unit S21 (6,000–9,000 rpm, max. 35 mm drilling diameter), and a horizontal drilling/sawing unit (4,500–6,000 rpm, max. 125 mm groove saw, swiveling range 0 or 90 degrees). • Graphical user interface: imawop for PC • Bima Cut Editor Office • Bima Cut Editor Import Interface • Controller for label printer • Label printer Technical Features • Max. clamping height from top of suction cup Z1: 100 mm • Workpiece thickness Z2: 14 – 38 mm • Working table height: approx. 1000 mm • Alternate field machining area without pendulum operation X: 2 x 2000 mm • Central clearance X without pendulum operation: 200 mm • With pendulum operation X: 2 x 1500 mm Lodpfex U T Hmsx Abbehb • Central clearance X with pendulum operation: 1200 mm • Automatic tool feed • Feed force: 11,000 N • Rotation direction: programmable, clockwise/counterclockwise Additional Information Machine still under power

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 RUWI Three-Spindle Under-table Router Professional equipment for the workshop This under-table router enables easy chamfering, edge rounding, profiling, grooving, sanding, and various other milling tasks, quickly delivering the desired result. Rapid tool changes are possible thanks to the conveniently accessible tool magazine. With the larger models, setup times are increasingly reduced. Costly and time-consuming fine adjustments and test milling are eliminated when equipped with all essential tools. The spindle can be continuously adjusted to the optimal working position. This model is ideally suited for workshop use and is often utilized for finishing. Made in Germany. Features and Technical Data: - High-quality construction - 3 tools available at any time - Electronic speed control prevents RPM fluctuations under load - Robust and high-performance motor - Motor with overload protection - Temperature monitoring via PTC resistor - Soft start and inrush current limiter - Reverse feed thread above ball bearings reduces ingress of dust and debris Lsdpfx Aerk Tqkebbohb - Fast tool change - Dust extraction above and below the table top - 1x fine adjustment - Including stop ruler - Including mounting kit for table extension - Convenient tool change from above - BG and wood dust certified Technical Data: - Table size: 640 x 500 mm - Table height: 910 mm - Variable speed control: 8,000 – 25,000 rpm - Tools available: 3 - Milling stroke: 43 mm - Motor power: 1,050 watts for continuous industrial operation - Voltage: 230 V - Router spindle: 22 mm diameter - Collets: 8 mm (standard), optionally 6 mm, 6.35 mm, and 10 mm - Extraction port: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: Short-term Location: Solingen

Stanje: dober (rabljeno), IMA BENZ drilling unit 10 + 11 spindle with additional milling unit and horizontal boring head 2 x 3 spindles for IMA 310, 410, 610 If you are looking for another drilling gearbox from Homag or IMA, contact us or visit our webshop on our website. The IMA BENZ drilling unit is a versatile and high-performance tool, specifically designed for IMA 310, 410, and 610 machines. It is a 10 + 11 spindle drilling aggregate with an additional milling unit and a horizontal boring head with 2 x 4 spindles. Here are some technical specifications: Unit No.: 4-08300 and 4-07753 Drawing No.: 000W00004824 and 000M11100819 Lhsdpfx Asudludobbsb Motor speed: 1max = 4800 min⁻¹ Spindle speed: 8100 min⁻¹ and 8400 min⁻¹ Drive power: 4 kW Gear ratio: i = 1:1.69 and 1:1.75 Milling spindle: For the use of milling tools The unit is pre-owned but in working condition, and offers high productivity due to the ability to perform multiple drillings simultaneously, significantly reducing machining times.

Stanje: dober (rabljeno),

Stanje: rabljeno,

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, IMA adapter unit, interchangeable module, edge trimming cutter, flat draw blade The IMA adapter unit is a refurbished interchangeable module for edge trimming cutters, equipped with a flat draw blade. With the item number 10 237 069 and an HSK 63 F mounting system, this unit is perfect for precise and secure machining operations. The unit rotates in sync with the drive direction and features a 57 mm opening. It is specifically designed for use with IMA machines and supports tools with bevel cutters. A flat draw blade is included in the scope of delivery. The bolt dimensions are 16/18.1 mm. The unit achieves a maximum speed of 9,000 RPM and a maximum probe travel of 1.5 mm. Thanks to comprehensive refurbishment—during which the unit was inspected, newly re-bearings installed, and pneumatic hoses replaced—it offers top safety and precision with an as-new condition. Lhedpfxoudl Idj Abbjb Used adapter units are removed from operational systems and are fully functional. Should age-related wear or significant loss of precision be present, this will be expressly highlighted. Technical Description Product: IMA Adapter Unit, Interchangeable Edge Trimming Cutter Module, Flat Draw Blade Item Number: 10 237 069 Mounting System: HSK 63 F Condition: Refurbished Rotation Direction: With drive direction Opening: 57 mm Support Bolt: For IMA Tools: For use with bevel cutters Flat Draw Blade: Included Bolt Dimensions: 16/18.1 mm Max. Speed: 9,000 RPM Max. Probe Travel: 1.5 mm Features: • Inspected and fully re-bearings for maximum safety and precision • Pneumatic hoses replaced • Technically as-new condition Please also visit our webshop for more units from various manufacturers.