IMA Novimat Concept / I / G80 / 440 / R3
IMA Novimat Concept / I / G80 / 440 / R3

Leto izdelave

2012

Stanje

Rabljeno

Lokacija

Nemčija

IMA Novimat Concept / I / G80 / 440 / R3 IMA Novimat Concept / I / G80 / 440 / R3

IMA Novimat Concept / I / G80 / 440 / R3

Prikaži karto

Podatki o stroju

Opis stroja:: IMA Novimat Concept / I / G80 / 440 / R3

Proizvajalec:: IMA

Model:: Novimat Concept / I / G80 / 440 / R3

Leto izdelave:: 2012

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Nemčija

Klic

Podrobnosti ponudbe

ID ponudbe:: A20971262

Št. reference:: DE-EDG-IMA-2012-00001

Nazadnje posodobljeno:: dne 16.01.2026

Opis

This IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine was manufactured in 2012. It features a robust automatic edge banding and finishing system, including a workpiece return system for increased productivity. It is capable of processing edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-release system and electronic temperature control for precise glue application. Consider purchasing this IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine. Contact us for further information.

Additional Equipment

Hodpfjx U U D Tsx Af Tjng
• Hinged milling unit: 2 motors, each 4.0 kW, 8800 rpm
• Heating unit: Preheating of workpiece edges up to 60 mm
• Glue application: Processing of edges up to 3 mm
• End trimming unit: 2 motors, 660 kW
• Additional units: Milling, multi-profile milling, contour milling, multi-profile scraper and scraper; buffing unit
• Automatic Quickmelt hot melt glue feed
• Board return system with powered roller conveyors, cross conveyor, belt conveyor, angle transfer, air cushion tables, and safety fence

Machine Advantages

Technical Advantages

• Minimum workpiece length: 150 mm / minimum workpiece width: 65 mm / minimum workpiece thickness: 8 mm / maximum workpiece thickness: 60 mm / smallest workpiece: 150 mm x 150 mm or 65 mm x 300 mm

Additional Information

This machine is configured for efficient edge banding and finishing, featuring robust functions and support for various workpiece sizes. It is immediately available for production use.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2017

1.232 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 631 7... oglasi

Dodaj na seznam priljubljenih

Deli Prijavi oglas

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Širok pas brusilnik Unitek 970 pneumatic

Naprawa

533 km

Širok pas brusilnik
Unitek970 pneumatic

Klic

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Hnsdpfxeg A D Ane Af Teg Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Poglej podrobnosti

Mali oglas

Robni stroj z avtomatsko napravo BIESSE STREAM B MDS 2.0/15.0

Wassylkiw

1.220 km

Robni stroj z avtomatsko napravo
BIESSESTREAM B MDS 2.0/15.0

250.000 €

EXW Stalna cena brez DDV

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1000023523, Biesse Stream B MDS 2.0/15.0 je enostranski robni lepilni center z avtomatsko napravo in ročnim vkladanjem dimenzijsko prilagojenih in kvadratnih plošč na fleksibilen način v 4 prehodih. Glavni tehnični podatki: Hitrost pomika verige: 10-25 m/min Dolžina plošče: 250-2700 mm Širina plošče: 120-1200 mm Hjdpfx Ajpz Shkef Tjng Debelina plošče: 10-60 mm Teža plošče: 75 kg Debelina robnega traku: 0,3-3,0 mm Lepilna enota: PU-lepilni set, nameščen namesto standardne naprave (EVA). Stroj je opremljen z orodjem za obdelavo robov z radijem R=1/1,5/2,0 mm in posnetjem pod kotom 25 stopinj. Tehnično stanje: Stroj je trenutno v proizvodnji.

Poglej podrobnosti

Mali oglas

Štiristranski mokri skobeljnik REX Rex do mokrego

Karsin

887 km

Štiristranski mokri skobeljnik REX
Rexdo mokrego

24.500 €

Stalna cena brez DDV

Klic

Mali oglas

KOPIRANJE TRAČNE ŽAGE CN MZ PROJECT UNIDUE 013 CNC

San Giovanni Al Natisone

124 km

KOPIRANJE TRAČNE ŽAGE CN
MZ PROJECTUNIDUE 013 CNC

Klic

Mali oglas

Stroj za profiliranje parketa CELASCHI TEAM 60/5

Marano Vicentino

280 km

Stroj za profiliranje parketa
CELASCHITEAM 60/5

Klic

Mali oglas

Obdelovalni center BIESSE Rover A FT 2243

Willroth

739 km

Obdelovalni center
BIESSERover A FT 2243

Klic

Mali oglas

Vrtalna linija Morbidelli Zenith F2 x 2 Mahros Brush SFx2

Złotniki

539 km

Vrtalna linija
MorbidelliZenith F2 x 2 Mahros Brush SFx2

290.000 €

Začetna cena brez DDV

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Drilling line consisting of: Hodegb D Afspfx Af Teng 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drilling machine 3. MORBIDELLI - ZENITH F2 CDM through-feed drilling machine 4. MAHROS - BRUSH SF unloading system Machine is connected and operates daily in a single shift. The first drilling machine is equipped with: Upper vertical heads – 3 units Lower vertical heads – 6 units Horizontal heads left + right – 2 units The second drilling machine is equipped with: Upper vertical heads – 3 units Lower vertical heads – 6 units Horizontal heads left + right – 2 units Rear horizontal heads – 6 units Below you will find detailed information about the machine and a video. It is possible to inspect the machine any day. The machine will be available in August 2021.

Poglej podrobnosti

Mali oglas

Membranska stiskalnica Wemhöner KT-MB-28/15-240

Verl

796 km

Membranska stiskalnica
WemhönerKT-MB-28/15-240

Klic

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, * Wemhöner Basic 1000 Plus - leto izdelave 2008 - Zelo dobro ohranjen, malo uporabljen * Tip: KT-MB-28/15-240 * S samodejnim pin sistemom in vgrajenim rotatorjem Hodpexbcudofx Af Tong * 2 mizi s samodejnim variabilnim pin sistemom * S teflonsko prevleko za predlepljeno folijo * Sistem polaganja folije za pin mizo (predlepljena folija) * Velikost ogrevalne plošče: 2.800 x 1.500 mm * Maks. velikost obdelovanca: 2.540 x 1.250 mm * Membrana: da * Rezalna postaja * Shranjevalni paternoster za folijo, višina 3,2 m, s 14 obesnimi palicami * PLC krmiljenje Siemens S7 * Upravljalna enota za PLC Siemens TP 270 (zaslon na dotik) * Samodejno napenjanje membrane * Inštalirana moč: 38,5 kW * Maks. tlak v komori: 6 bar * Maks. odprtje stiskalnice: 150 mm * 6 cilindrov, Ø 125 mm * Obratovalna napetost: 400 V, 50/60 Hz * Višina komore stiskalnice: 40/60 mm * Maks. pritisk stiskanja: 2.400 kN * Obratovalni tlak hidravličnega sistema: 320 bar

Poglej podrobnosti

Mali oglas

Kot nov, podoben CNC-obdelovalni center Biesse Rover K 1536 FT

Varpaisjärvi

2.074 km

Kot nov, podoben CNC-obdelovalni center
BiesseRover K 1536 FT

55.000 €

Stalna cena brez DDV

Klic

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.600 mm, pomik osi Y: 1.500 mm, As new nesting CNC machining center Four-axis nesting CNC machining center. Purchased new in 10/2019. Less than 900 machining hours. The business for which the machine was acquired ceased due to the Covid pandemic, which is why usage has been minimal. Has been connected to an AL-KO extraction system, which is also available for sale in a separate listing. Table size: 3600 x 1500 mm. Can be used as a traditional nesting table machine or the table can be removed and vacuum pods used to lift the workpiece for machining. The machine is fully operational in every respect and represents an excellent alternative to a new machine. Hsdpoxz Rfqofx Af Teng Automatic 10-position tool changer, two Busch vacuum pumps (rotary vane, 250 m³/h each). The working area can be divided into two separate zones. Drilling unit for vertical and horizontal drilling. Grooving saw. Automatic tool height measurement (enables processing with multiple tools without visible height differences between them). bSolid software, Finnish language version. Compatible saw aggregate and planer aggregate are also for sale. The machining unit is equipped with collision sensors, so a safety fence is not required. The buyer is responsible for all costs related to transport, moving the machine, and preparing it for relocation (this service can be provided by, for instance, the machine’s importer).

Poglej podrobnosti

Mali oglas

STROJ ZA FORMATIRANJE IN ROBLJENJE ROBOV SOFTFORM HOMAG KFL 620 / 23 / QE / 30 SOFTFORMING

Roreto

584 km

STROJ ZA FORMATIRANJE IN ROBLJENJE ROBOV SOFTFORM
HOMAGKFL 620 / 23 / QE / 30 SOFTFORMING

Klic

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in one line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 0.4 - 12 Panel thickness (min/max) mm: 8 - 100 Working width (min/max) mm: 240 - 3000 Control system: Power Control PC22 (Windows XP) Software woodCommander Feed speed (adjustable) (m/min): 10 - 40 Safety and sound-insulation cabins Retractable positioning stops, distance (mm): 400 FORMAT PROCESSING (for each side): Jointing milling unit (2 x 6.6 kW) Open space Left side only: 2 x universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot Melt glue + premelter) E34 Pressure roller track (revolver type) for straight and shaped (softforming) edges, GL sextuple Edge magazine for coils (1 slot) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°-30°) Hodstt Iudjpfx Af Tong Milling unit (2 x 0.55 kW) 0°-30° Contour copying unit (tracing) FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Poglej podrobnosti

Oglašujte tukaj