Laminator

ICO-Systems

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm Chsdpfx Aioxq Tbtoqjc (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Chodpfx Aeu I R Utjiqoc Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: zelo dobro (rabljeno), Portal machine Chodsgwbbqepfx Aiqec Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Chsdsurc S Repfx Aiqsc Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Stanje: kot nova (razstavni stroj), PFAFF 8320 - 111/101 dolgo-ročna izvedba s mizo Chjdpfexa D Hrox Aiqsc

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Max. material width: 1700 mm, max. roll diameter: 800 mm, core inner diameter: 152 mm, max. roll weight: 750 kg, stacking length: 250–2200 mm, connected load: 12 kVA, length: 8397 mm, supplied with drawings, circuit diagrams, EC Declaration of Conformity, operating manuals, risk assessment, spare parts lists. Cjdpfokkiwxjx Aiqjhc

Stanje: novo, Za delovanje generatorja dušika je potreben dodaten kompresor zraka. Čistost dušika: 99,999 % Vhodni tlak: 8 bar Izhodni tlak: 7 bar Moč: 75 W (strošek na uro za proizvodnjo dušika) 3-v-1 zasnova, brez potrebe po dodatnem kompresorju, hladilniku ali sušilcu zraka Plin je čist Cena je EXW (skladišče Evropa), vključno z nakladanjem na tovornjak. Prevoz, montaža, zagon, usposabljanje in letne servisne pogodbe so na voljo po dogovoru za doplačilo. Namestitev in usposabljanje vedno izvaja naša visoko usposobljena servisna ekipa na treh lokacijah v Evropi: Nizozemska, Nemčija, Romunija. Codpoxfrv Eofx Aiqehc Uradni prodajalec CNC Top Ten bv Coevorden, Nizozemska

Stanje: novo, Cefla sistem za lakiranje Chodpfx Aiswhbrwsqec

Stanje: rabljeno, številka stroja/vozila: 006290, Največja obdelovalna širina: 1300 mm Chodpfsu A Evhox Aiqec Največja obdelovalna višina: 100 mm Število valjev: 4

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), AZR 600 18,5 kW 30 okroglih nožev z varjenimi nosilci nožev, vključno z 2 vrstami nožev = 30 nožev »V5« Sito 15/20 mm Poševno ohišje stroja Cedpoi Hb Iasfx Aiqshc Držalo s pritrdilno ploščo Vibracijsko dušilne noge stroja Samodejni zagon v konfiguraciji zvezda-trikot Samodejni izklop pri praznem lijaku Odhajališče s 5 m kablom in upravljanjem preko PLC (programljivega logičnega krmilnika) Vhodna odprtina: 600 x 800 mm Prostornina lijaka: 0,6 m³ Premer rotorja: 252 mm Glavni motor: 18,5 kW - 400 V - 50 Hz - 3-fazni Hidravlični motor: 0,75 kW - 400 V - 50 Hz - 3-fazni Dodatne informacije o našem sistemu nožev: reinbold-entsorgungstechnik.com/files/prospekte/messer-rotor-sys teme-2021.pdf - Pridržana pravica do tehničnih sprememb in napak -