Stiskalnica za bale

HSM GmbH VK 2310

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 208 h, Funkcionalnost: popolnoma funkcionalen, RS-F-8 flexo pris proiectat pentru producția de etichete de înaltă calitate și etichete LML (opțional) la viteze ridicate. Un motor servo de dimensiuni mari, de 1000 mm, controlează dispozitivul de derulare, asigurând alimentarea lină a hârtiei și oprirea automată la capătul bobinei. Construcția compactă și traseul extrem de scurt al hârtiei reduc risipa de material. Întregul utilaj utilizează un sistem servo, incluzând unitatea de derulare, două role de tracțiune, 8 unități de tipărire, un set de unitate de tăiere (die-cutting), unitate pentru îndepărtarea deșeurilor, un set de cuțit tip crush și un set de cuțit tip shear. Sistemul complet servo asigură stabilitatea și uniformitatea tensiunii materialului. Pgodpjwb Shcjfx Adyog Rolele mari, răcite cu apă, au o suprafață de contact extinsă cu hârtia; cilindrul de tipărire și cel răcit cu apă sunt integrate, ceea ce face ca procesul să fie mai stabil, răcirea mai rapidă și viteza de operare mai mare.

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: Psdpfeua D Alsx Adyjgg - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Leto izdelave: 2023, Stanje: novo, ‼️BLACK FRIDAY OFFER‼️ GET €500 DISCOUNT UPON PURCHASE‼️ OFFER VALID UNTIL SATURDAY, 29.11.2025‼️ For all your recycling needs, we have shredders and various recycling machines in stock in Heilbronn. From copper recycling to plastic recycling, you can purchase all necessary machines from us. Feel free to ask us for details. Psdep E Einepfx Adyjgg ‼️CAN BE INSPECTED ON SITE‼️ We are happy to demonstrate the machine live in Leingarten! By appointment only! We are based in Heilbronn, a German company, subject to German laws, including warranty and service! We also speak English! Efficient, professional copper extraction for cables from 1.5mm to 120mm! ➡️Compliant with UVV (German accident prevention regulations), implemented by our local German company Our cable stripping machine: Josan S120! ▶️Weight approx. 236 kg This allows you to recycle cables quickly and cost-effectively and obtain pure copper. Very fast processing. Powerful 3 kW motor. Built for durability. Please review the machine closely in the photos. Alternatively, see it live on site in Leingarten (by appointment only). Net price: €3,999.00 +19% VAT: €759.81 Gross price: €4,758.81 As we also carry out recycling ourselves, we can demonstrate our machines by appointment. All machines CE certified by us. ‼️For further questions, please contact us! We can only respond if you provide your name, address, email, and phone number. Otherwise, your inquiry may be filtered as spam. We will then get in touch and advise you in advance!‼️ Images/equipment/price may vary. Subject to errors and prior sale.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. Pedpfjvwlqqjx Adyjgg The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2024, obratovalne ure: 10 h, Stanje: skoraj kot novo (rabljeno), Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without any issues. The stuffing unit reliably compacts the loose material and feeds it directly to the extruder. This ensures consistent material intake and stable extrusion, even with challenging input materials. Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and voluminous materials such as EPS or film regrind • Efficient material feed thanks to integrated stuffing unit • Compact design, easy to maintain - Feeding extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit - Hopper for material feed (Suitable for low bulk density material) Pedpfx Adstziudeyjgg - Large filter / screen changer - Strand die adapted

Stanje: dober (rabljeno), Transportni trak za odstranjevanje odpadkov za giljotino, trinožni stroj in avtomatski izsekovalni stroj. Pgjdpfxowfq T So Adyjg Proizvedeno v Nemčiji. Delovna širina 52 cm, dolžina transportnega traku pribl. 300 cm. Izmet odpadnega materiala neposredno izpod stroja v zabojnik.

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 1 h, številka stroja/vozila: V 516, skupna širina: 2.000 mm, skupna dolžina: 7.000 mm, skupna višina: 1.800 mm, obratovalni tlak: 300 letvica, stiskalna sila: 90 t, maks. debelina aluminijaste pločevine: 5 mm, moč: 11 kW (14,96 KM), lastna masa: 16.000 kg, rezalna sila: 90 t, leto zadnje generalne obnove: 2025, Package dimensions: 400x400 mm Podpfx Adslhqd Reysgg Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminium throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Machine weight: 16 t With wheels or oil collection tray Location: Austria Available from: 30/01/2026

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Pgjdpfxjic Rl Dj Adyjg Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Teža: 4950 kg, skupna masa: 12 000 kg Pgjdpfx Aswpmckjdyjg 5,5 kW

Stanje: dober (rabljeno),