HOMAG PROFI BAZ20/30/16/V/D

HOMAG PROFI BAZ20/30/16/V/D

This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It is equipped with Homatic CNC control, WOODWOP CNC programming system, an 18-position disc tool changer, and a main spindle with a 12 kW three-phase motor. The machine can process workpieces up to 3,000 mm in length and 1,400 mm in width and is fitted with a full-length table with adjustable vacuum clamps. Ask about the availability of this HOMAG PROFI BAZ20/30/16/V/D CNC woodworking center. Contact us for further details.

• Control/Software: Homatic CNC controller; WOODWOP CNC programming system; Postprocessor
• Workpiece capacity:
• Length: 800–3,000 mm; Width: 350–1,400 mm; Max. thickness: 70 mm with edge / 80 mm milling
• Minimum rail width: 120 mm; Max. weight: 150 kg
• Table/clamping:
• Full-length table (D-table)
• Longitudinal console 1 fixed; Longitudinal console 2 adjustable manually in Y-direction
• 8 vacuum clamps, 125 x 50 x 100 mm
• Working height, bottom edge of workpiece: 950 mm
• Unit for shifting vacuum clamps on carrier rail with pneumatic extension console (max. 4 clamps per longitudinal console)
• Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console
• Stop pins for laminate overhang: lifting/rotating device, max. 20 mm overlay, stroke length 110 mm, individually selectable, end-position monitored (for manual door loading)
• Main spindle:
Nedpfx Asx D Ribeltsld
• Speed range: 1,500–18,000 rpm (VFD 15 kW), full rated power from 12,000 rpm
• Max. tool diameter: 180 mm (milling) / 200 mm (sanding); dust extraction for all tools/units
• Unit interface/C-axis:
• Pneumatic and tiltable drive interface
• C-axis with torque drive and 3-point support
• Tool changer:
• 18-position disc tool changer for HSK F63; tool weight 6 kg; max. tool length 200 mm
• Configurations: 18 x max. Ø 130 mm; or 9 x max. Ø 180 mm + 9 x max. Ø 70 mm; sanding tools max. Ø 200 mm
• Toolchanger raised for traveling pickup (left side)
• Units (for tool changer unless stated otherwise):
• Drilling/milling unit, 4 spindles: ER25 up to shaft Ø16 mm, max. projection 50 mm, max. speed 13,500 rpm, continuously tiltable via C-axis
• Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12,000 rpm, integrated air blast, unlimited tilt over C-axis
• Tilting saw/drilling unit: manually 0–90°, flange Ø30 mm, cutting body Ø52 mm, prepared for crosscut saw max. Ø 180 mm, drill chuck with Weldon D=10 mm, max. speed 9,000 rpm, C-axis tiltable
• Cutter holder D=30 with chip guide: arbor length 45/80 mm, chip deflector plate controlled via C-axis, changer space Ø 140 mm
• Edge trimming unit: simultaneous top/bottom, edge radius max. R12 mm, min. external radius ~R5 mm / internal radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis tilt, max. speed 12,000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow sensing shoes
• WPL cutterhead: exit angle 5°, Ø 70 mm
• Edgebanding/gluing equipment:
• Drive spindle/V for gluing units: mounted on the right side of the gantry; cross-slide with Y return lock and Z-axis lift; return lock with C-axis and electric/electronic interface; own Z-axis
• Gluing unit for 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); minimum internal radius R40 at 90°; max. edge height

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.