CNC tračna žaga in obdelovalni center
MZ PROJECT PLURIS

Name: MZ PROJECT PLURIS
Brand: MZ PROJECT
Availability: InStock

Leto izdelave

2017

Stanje

Rabljeno

Lokacija

Liverpool

CNC tračna žaga in obdelovalni center MZ PROJECT PLURIS

Prikaži karto

Podatki o stroju

Opis stroja:: CNC tračna žaga in obdelovalni center

Proizvajalec:: MZ PROJECT

Model:: PLURIS

Leto izdelave:: 2017

Stanje:: dober (rabljeno)

Cena in lokacija

Lokacija:: Moorgate Point 1, L33 7DR Liverpool, United Kingdom

Klic

Podrobnosti ponudbe

ID ponudbe:: A16159290

Nazadnje posodobljeno:: dne 15.05.2024

Opis

Mehrblattbearbeitung für maximale Ausbringung
Automatisches Beladesystem
CNC-Bandsägen, Fräsen und Bohren
CNC-Steuerung der Bandsägenbewegung +/- 90 Grad
Die MZ Pluris gilt als bevorzugte Maschine für alle Hersteller von Sofas und Stuhlgestellen.
Die Maschine kann mit OSB, Sperrholz, MDF, Spanplatten (gute Qualität), Massivholz sowie einigen Verbundmaterialien arbeiten.
Sie bietet zahlreiche Vorteile gegenüber herkömmlichen CNC-Nestingmaschinen, darunter die Möglichkeit, mehrere Platten übereinander zu stapeln, z. B. 5 x 12 mm dicke Platten. Durch den Einsatz der Bandsäge ist die Materialausbeute deutlich höher, es wird kein Vakuum benötigt, sodass auch kleine Zuschnitte problemlos bearbeitet werden können. Zudem werden die Fertigteile während des laufenden Betriebs seitlich auf das Austragsband abgegeben, was die Maschinenleistung maximiert.
Erhöhte Arbeitskapazität: 2550 mm x 1550 mm
Plattenformate: 1220 x 2440 mm (8' x 4') und 1525 x 1525 mm
Standardausstattung / Merkmale:
CNC-Bandsäge-Spezifikation:
- Maximale Kurventiefe: 800 mm
- Minimaler Schnitt-Radius: 50 mm
- Maximale Schnitthöhe: 100 mm
- Automatische Blattwinkelverstellung +/- 90 Grad
- Sägeblätter: 5900 x 13 mm
- Automatische Bandsägenblattspannung
- Bandsägenräder aus Aluminiumguss Ø 900 mm
- Selbstbremsender Motor: 11 kW
CNC-Frässpindel-Spezifikation:
Itodpotqfv Iefx Af Teb
- Maximale Arbeitshöhe / Schnitttiefe: 60 mm
- Elektromotorspindelleistung S6: 9 kW
- Variable Drehzahl: 7000–24.000 U/min
- Werkzeugaufnahmen: HSK 63F
Anschläge / Greifer / Auflagen:
- Programmierbarer Schiebeanschlag mit 6 pneumatischen Plattengreifern
- 8 Plattenauflagearme
Allgemeines:
- Zentrales automatisches Schmiersystem (3 Ölpumpen)
- Interner Förderbandtransport für Staub- und Abfallentsorgung
- Frei stehender Schaltschrank mit PC und Tastatur
- Hand-Fernbedienung
CNC-Bohraggregat vertikal:
- Maximale Bohrtiefe: 70 mm
- 5 unabhängige, in Linie angeordnete Bohrspindeln (Bohrer nicht inklusive)
- Motor: 1,7 kW
Plus-Paket:
- 5-fach automatischer Werkzeugwechsler
- Automatische Positionierung der Spannvorrichtungen und Auflagearme über das Programm
Hubtisch:
- 4 Spindeln
- Kapazität: 2550 x 1525 mm
- Max. Traglast ca. 3000 kg
- Max. Paket-/Plattenhöhe: 700 mm (Grube erforderlich)
Baujahr: 2017 (CE)
Seriennummer: 22/2017

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2012

37 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+44 151 3... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Avtomatska linija za spajanje lesa GOMA FC10KZ6 PZ6/2

Szczecinek

850 km

Avtomatska linija za spajanje lesa
GOMAFC10KZ6 PZ6/2

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Ijdpfjlu D Tfjx Af Tetb Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar

Poglej podrobnosti

Mali oglas

Morbach

713 km

Valjčna miza
H.I.TRollenbahn

7.000 €

Začetna cena brez DDV

Klic

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Ijdpsihpn Nsfx Af Tetb Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Poglej podrobnosti

Mali oglas

Karlholmsbruk

1.609 km

Chipper
Söderhamn Eriksson670-56

Klic

Stanje: rabljeno, Sečnja hlodovine: 100–150 m³/h Sečnja manjših ostankov: 50–100 m³/h Teža: 3.165 kg Največji premer hloda: 254 mm Sekalnik Söderhamn Eriksson 670-56 CC z električnim motorjem. Sekalnik Söderhamn Eriksson 670-56 je namenjen izdelavi sekancev za proizvodnjo celuloze, vlaknenih in ivernih plošč. Za surovino se lahko uporabljata tako okroglo lesno deblo kot tudi odpadek iz žagarskih obratov. Podajanje lesa pri sekalniku 670-56 poteka vodoravno, pod kotom 37,5° glede na vlaknasto smer. Sekanci enakomerne, visoke kakovosti se lahko izločajo na dnu ali pa se odpihnejo naravnost navzgor. Itedohclffspfx Af Teb Bodite med tistimi lesno-predelovalnimi podjetji, ki znajo pametno upravljati z razpoložljivimi viri.

Poglej podrobnosti

Mali oglas

Schio

281 km

žaga z več rezili
ANGOMACSOLID-M

Klic

Mali oglas

Lepilni glavnik / stroj za spajanje prstov SMB - GRECON - DIMTER - COOK BOLINDER 15 und 20 mm

Achern

594 km

Lepilni glavnik / stroj za spajanje prstov
SMB - GRECON - DIMTER - COOK BOLINDER15 und 20 mm

Klic

Mali oglas

173 cm ROLLER BAG 3-stranski ROLLER TROLLEY allda RW-3173g

Moers

850 km

173 cm ROLLER BAG 3-stranski ROLLER TROLLEY
alldaRW-3173g

75 €

Stalna cena brez DDV

Klic

Leto izdelave: 2019, Stanje: zelo dobro (rabljeno), ROLL TROLLEY / ROLL CONTAINER 3-sided WIRE MESH ROLL CONTAINER ROLL TROLLEY 810 x 720 mm Inclined roll base provides extra safety during transport of all types of goods Parcel roll trolley, parcel trolley, DHL parcel trolley, postal trolley, DHL trolley— also ideal for storing firewood and suitable for yellow refuse sacks. Total height: 1730 mm Item no.: RW-3173 Price: €75 net / per unit Used, with signs of use and occasional paper residue Fully functional / ready for immediate use Roll containers are fully anonymized: no branding or reference to previous owners is visible. Trolleys are delivered fully assembled, as pictured. (New unit observed for: 1 piece at €189) Currently approx. 5,000 roll trolleys in stock. Item is used & extremely robust Load capacity up to 500 kg Offered as pictured Item can be viewed by appointment Description: (Ideal for up to 5 intermediate shelves, see further photos; Intermediate shelves are not included, but are available on request) COLLECTION by prior arrangement from warehouse at 47441 Moers possible. Inspection expressly encouraged; item can be taken immediately if interested. Description: Plastic rolling base type 724 x 815 mm; with 2 reinforcement irons, with castors ø 108 mm, polypropylene, 2 swivel castors / 2 fixed castors Tube diameter for steel frames: tube ø 22 mm Iedpfx Ajh S E A Ejf Tetb Load capacity: 500.00 kg Colour: yellow base plate / red side grids and rear grid 2 side grids, usable height 1600 mm Total height: 173 cm Infilling: 7 x vertical flat bars 12 x 3 mm 2 x horizontal flat bars 12 x 3 mm 1 x cross tube ø 16 mm 1 rear wall incl. 4 plastic clamps with screws and nuts for connection to side grid Rearward-sloping inclined roll base We are happy to purchase used roll containers, also in large quantities. JS Trading GmbH Photos for reference; similar items shown.

Poglej podrobnosti

Mali oglas

Vertikalni obdelovalni center CNC FAMUP - Emco MCP 100 Evolution

Dortmund

811 km

Vertikalni obdelovalni center CNC
FAMUP - EmcoMCP 100 Evolution

11.000 €

Začetna cena brez DDV

Klic

Stanje: dober (rabljeno), Leto izdelave: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, through-spindle coolant (IKZ), linear guides, and 30-position tool changer Table size 2 x 1000 x 450 mm Tool holder DIN 69871 ISO 40 Travels X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm Spindle speed range 50 – 10,000 rpm Table load capacity 600 kg Feed rate, X/Y/Z, stepless - 10000 mm/min Rapid traverse in all axes 30 m/min Drive power 18.5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm Weight approx. 6700 kg Accessories / Special Features: • CNC contouring control SIEMENS 840 D • Dual pallet changer • 30-position automatic tool changer • Full enclosure with electrically interlocked safety doors • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller blocks for uniform absorption of high torques in all directions • Ball screw drives in all 3 axes • Meehanite cast iron machine base for precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Hinged belt chip conveyor with integrated coolant system Ijdpfx Afsd I R E Ne Tetb • 4th axis prepared • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Poglej podrobnosti

Mali oglas

Kompletna žaga (mobilna) Kara F2000 stationair

Gemert

906 km

Kompletna žaga (mobilna)
Kara F2000stationair

39.500 €

Stalna cena brez DDV

Klic

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 17002, dolžina rezanja (maks.): 6.000 mm, moč: 45 kW (61,18 KM), Kara F2000, malo rabljena, letnik 2017, moč motorja 45 kW, s podajalnim in odvodnim sistemom, dimenzije računalniško vodene, vklj. s kapno žago, vklj. 6 žaginimi listi, z vgrajenim brusilnikom, vklj. vgrajen izsesovalni sistem. Iedpfxorg E Exs Af Tetb

Poglej podrobnosti

Mali oglas