Obdelovalni center

HOMAG BAZ 211 VENTURE 20M

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 94323, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, skupna višina: 2.400 mm, skupna dolžina: 4.400 mm, skupna širina: 2.800 mm, skupna masa: 3.130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC machining center Fully operational, available for inspection in Wadowice Nedpjwpthtsfx Ag Tswc X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm Control type: CNC XP 600

Stanje: rabljeno, Leto izdelave: 2009, Biesse factory control Working area on X-axis: 3500 mm Working area on Y-axis: 1585 mm Travel on Z-axis: 350 mm No. 2 working zones Nwjdpfx Agow D Dhas Tjc Bar worktable No. 8 adjustable rails No. 4 pneumatic Bakelite rails for panel lifting 3 adjustable suction cups per rail with vacuum seals to hold the panel during processing No. 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK taper 10-position rotary tool changer on the machining head 24-position chain tool changer – located at the rear of the machine Drilling unit with vertical and horizontal spindles, composed as follows: - No. 12 vertical spindles in X direction - No. 12 vertical spindles in Y arrangement - No. 6 horizontal spindles in X direction - No. 4 horizontal spindles in Y arrangement - No. 1 independent saw blade for creating X grooves Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized conveyor Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Nodpfx Agowcyd Is Tewc Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Nwedexraimepfx Ag Tec Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles Njdpfx Agogwbbqs Tjwc No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: rabljeno, številka stroja/vozila: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Nodpfxowuz N Nj Ag Tjwc Working table: With vacuum pod supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool positions: 16

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza Lokacija zaloge: Stranka Nwodpfoxgfbqsx Ag Tec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Na voljo je CNC lesnoobdelovalni center Homag. Pomiki X/Y/Z: 4000mm (4200mm)/1235mm/182mm. Dimenzije stroja X/Y/Z: cca 8000mm/5500mm/2950mm. Obratovalne ure: cca 33.226h. Stroj je na terminalu občutljiv na dotik, laser pa ima težave pri prepoznavi obdelovancev. Vključno z rezervnimi potrošnimi materiali, hladilnikom ter različnimi vpenjali in sesalci. Dokumentacija je priložena. Možen ogled na lokaciji. Nwjdpfx Aeyddz Sjg Tsc

Stanje: rabljeno, Leto izdelave: 2018, skupna višina: 2.200 mm, skupna dolžina: 4.550 mm, skupna širina: 2.200 mm, Poids à vide : 3 000 kg - Année de fabrication : 2018 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE présent : Oui - Numéro de série : AH00000267 - Type de table de fraisage : Table à poutres - Outil de perçage inclus : Oui - Unité de sciage incluse : Oui Njdpfxoxn S H Nj Ag Towc - Dispositif de sécurité : Clôture de sécurité - Pompe à vide incluse : Oui - └ Quantité [pc] : 1 - └ Marque : Becker - └ Puissance du moteur principal [kW] : 2,2 - └ Diamètre de raccordement [mm] : 33 - Surface de travail X [mm] : 3050 - Surface de travail Y [mm] : 1250 - Surface de travail axe Z [mm] : 130 - Dimensions de transport : 4550 mm x 2200 mm x 2200 mm (L x l x h) - Poids de transport [kg] : 3000 kg - Nombre de colis de transport : 3 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA récupérable pour les entreprises Livraison et reprise possible à tout moment pour tout équipement industriel Glenn Smeets

Stanje: zelo dobro (rabljeno), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center featuring comprehensive equipment and outstanding condition — Technical Specifications Nsdpfxjxk Tume Ag Tjwc • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Working area X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal machining • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix table or console table • Options: Edge banding and labeling — Key Features • High dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is immediately available. Disassembly and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to prior sale and errors.