Stacionarni odsesovalni sistem

Holzing RLA ATEX 11 000 m3/h (11 kW)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Nlsdpfxsdqzcxe Abieg Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022,

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Nljdpfxji Dfidj Abiog Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Vacomat 350 XP TWIN Veliki sesalnik Vacomat 350 XP TWIN je prava energijska rešitev med mobilnimi sesalniki. Dva motorja s frekvenčnim reguliranjem (po 5,5 kW) zagotavljata, še posebej pri močno spremenljivih delovnih pogojih, ustrezno prilagojeno sesalno moč. S tem se porabi samo toliko energije, kot je dejansko potrebno. Ta sesalnik lahko pretaka do 10.000 m³/h zraka in je idealen za sesanje velikih CNC-strojov ali celotnih obdelovalnih centrov. Inovativni in visoko inteligentni nadzorni sistem avtomatizira proces sesanja s stroji, ki so povezani v sistem. Sesanje se začne samodejno, ko se vklopi povezan obdelovalni stroj. Pri manjših potrebah po moči se zažene samo en ventilator. Ko deluje več sesalnih točk, se samodejno vklopi drugi ventilator. Standardno se čiščenje filtrov samodejno začne v časih, ko stroji ne delujejo, takoj ko so vsi povezani obdelovalni stroji izklopljeni. Naša patentirana tehnologija pretresa filtrov s pomočjo priključka za stisnjeni zrak pnevmatsko/mehansko zagotavlja nežno čiščenje s sistemom "iztrepanja" (vhodni tlak 6 bar, poraba zraka na cikel čiščenja približno 11 l). Po želji, predvsem pri zelo visokih in zelo finih koncentracijah prahu, kot je na primer gips, je na voljo učinkovito čiščenje s pritiskom. Čiščenje s pomočjo rezervoarja za stisnjeni zrak se izvaja izven delovanja sesalnika (POZOR: višina se poveča za +100 mm in dolžina za +350 mm). Njdpfxozp Edwj Abiolg Naši Vacomati so izdelani po modularnem sistemu. Standardno se mešanica prahu in ostankov v štirih prahotesnih zabojnikih za ostanke (4 x 120 l) s nameščenimi, močnimi plastičnimi vrečkami odvaja. Podtlak ohranja plastične vrečke varno v zbirnem posodi. Pregledna okna olajšajo nadzor nad nivojem polnjenja. Nizka poraba energije zahvaljujoč sodobnemu, visoko učinkovitemu motorju (IE3) "Made in Germany" in aerodinamično optimizirani notranjosti ohišja z nizkim upornostjo pretoka zraka. Recirkulacija toplote s sistemom recirkulacije zraka: topel izhodni zrak se filtrira in se ponovno dovaja v delavnico. Tiho delovanje: dvojna stena obloge filtrov absorbira nastale sesalne hrupe neposredno v notranjosti Vacomata. Poleg tega je ohišje ventilatorja zvočno izolirano. Odobreno za notranjo namestitev v prostorih, kjer je prisoten lesni prah - izdelano po novem standardu DIN EN 16770. Zdrav povratni zrak: visokokakovostni in posebej razviti filtri iz antistatičnega poliestrskega filca filtrirajo 99,9 % prahu in ostankov iz zraka (razred prahu M za St 1 prah, v skladu s TRGS 553). Povečana varnost s protipožarnimi in protieksplozijskimi ukrepi v skladu s standardom DIN EN 16770: preizkušeno do 20.000 Pa, samodejno aktiviran sistem gašenja s prahom - brez poškodb zaradi vode! Zanesljivo delovanje: tlačni senzor nenehno spremlja sesalno moč. Napake so prikazane s signalno lučko. Nizki stroški vzdrževanja zahvaljujoč visokokakovostnim komponentam in dolgi življenjski dobi filtra: na primer, ekstra velika komora za umirjanje zraka zagotavlja prvo ločevanje grobih ostankov. S tem se filtri dodatno ne obremenjujejo z materialom. Nizko vzdrževanje zaradi servisne enote na konzoli motorja in enostavnega dostopa do notranjosti filtra. Vse specifikacije v skladu z navodilom proizvajalca.

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Nledjpgkmwjpfx Abiog Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table Nlsdshp Rcrspfx Abiog With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Nledpfxodqzh Rs Abijg Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Nljdpfsqlckpex Abiog Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Leto izdelave: 2016, stanje: delavnici obnovljeno (rabljeno), Agregat z 2 hidravličnima pritisnima čevljema od zgoraj za brezpremični pritisk lepljenih deskastih lamel v mehanski stiskalnici. (Namesto velikega kladiva ali težkih uteži na žerjavni kljuki) Pogon SEW z reduktorskim motorjem in trenjskim kolesom 1,1 kW. Hidravlični agregat 5,5 kW. Prostornina oljnega rezervoarja: 160 l. Tlak: 40 / 250 bar. Stroj je bil leta 2012 v celoti obnovljen in opremljen z novo elektro omaro in novo električno napeljavo. Ker stranka ni plačevala obrokov, smo stroj po približno 1,5 letih ponovno prevzeli. Stroj je bil v uporabi največ 1 leto v urnem režimu. Njdpsd Dcmqjfx Abislg

Stanje: rabljeno, Tehnični podatki: Maksimalna širina glajenja: 630 mm Maksimalna višina glajenja: 300 mm Premer nožnega valja: 120 mm Število nožev: 4 Število valjev v mizi: Hitrost podajanja: 5/8/12/18 m/min Električno dvigovanje Priključek za odsesavanje: 150 mm Nledpfoxz Dlkjx Abieg Napajanje: 400 V Moč motorja: 7 kW Skupne dimenzije: Dolžina: 1280 mm Širina: 630 mm Višina: 1200 mm