CNC obdelovalni center

Holz-Her Pro-Master 7123 M 500

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: električni, moč: 7,5 kW (10,20 KM), Tilting Spindle Moulder HOFMANN TFS 107 Standard Equipment: - 7.5 kW motor, 400 V, 50 Hz Kdsdpju Nz Ndjfx Afnjw - Table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings - Electronic soft start and brake device - Electric height and tilt adjustment for rapid and fine feed, accurate to 0.1 mm, height adjustment approx. 145 mm - Tilt adjustment +/- 45.5° - 4 spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm - Milling fence, type 2601 Efficient, with multiplex fence jaws - Fixed spindle, Ø 30 mm with quick-release nut "fix" - Forward/reverse rotation, machine socket, arc guard type TAPOA, Hofmann "Centrex" - Paint finish: grey white/signal blue Electrical connection: Motor power: 7.5 kW – Minimum fuse (A): slow 30 Additional equipment installed on this machine: - Table size 2,000 x 815 mm with extendable support (480 mm extension) instead of standard table - Infinitely variable spindle speed control for TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor (replacing standard soft start motor) - HOFMANN spindle fence type 2620 instead of standard fence 2601 Efficient. Total adjustment via handwheel with display, including switchover to tooling zero point. Digital display for individual fence jaw adjustment. Includes quick-release system for fence jaws - 2 cast iron fence jaws, 500/500 mm - Guide rails and rebate board, consisting of 5 rulers, 1 rebate board, 10 guide pads - Raised control panel - Tool compartment for TFS 107 (only possible with raised control panel) - Operating manual TFS 107, German

Stanje: rabljeno, Leto izdelave: 2009, automatic central lubrication milling unit 7833, 2-stage, 11 kW power, 1,000 - 24,000 rpm; 1 double drilling spindle in X direction; 1 integrated saw unit for sawing/grooving in X direction, traversing; tool changer 7892, 16-position linear pick-up changer, permanently installed on the right side of the machine; laser pointer set: 2 laser pointers for positioning the vacuum cups or referencing the workpiece contour; automatic console and vacuum cup positioning; 6 consoles incl. 3 vacuum cup mounts per console, incl. 1 vacuum cup 80x80 mm per mount; incl. 4 loading aids; additional processing zones at the front for 6 consoles; base unit pneumatic system for frame clamping system 7974 (6 consoles); 2D barcode scanner; video camera in the machining head; vacuum pump 140 m³/h; Vario tool change unit package consisting of: vector axis 7899 (C-axis) fully interpolating, 0-360° infinitely rotatable, incl. pneumatic tool changer 7890, single-position magazine, pick-up system, fixed installation in front of the machine frame on the left; tool changer 7894, 6-position pick-up magazine especially for Vario tool change tool holders, fixed installation in the left side of the machine frame, can be equipped with collet chucks Vario Grip KSJ F 40, 3 pcs. tool holders Vario Grip KSJ F 40 (for collets 2-20 mm ER32), 1 pc. saw blade adapter, 3 pcs. collets per customer selection, 1 pc. carbide circular saw blade max. 220 mm diameter. Location: Nattheim Kdjdpfx Aevvi Spjfnow

Stanje: novo, Miza za vzdolžno žaganje – dimenzije: 1600 x 375 mm Maksimalna dolžina reza: 1500 mm Širina reza med žaginim listom in vzporednim vodilom: 1250 mm Premer glavnega žaginega lista: 400 mm Višina reza pri 90°: 115 mm Višina reza pri 45°: 105 mm Hitrost glavne gredi: 4500/6000 vrt/min Premer glavne gredi: 30 mm Zasuk žaginega lista: 0–45° Dviganje in spuščanje žage – električno upravljanje Kodsfd Raaepfx Afnedw Glavni motor: 5,5 kW Premer predrezovalnega lista: 120 mm Hitrost predrezovalnega lista: 7000–8000 vrt/min Premer predrezovalne gredi: 20 mm Predrezovalni motor: 1,1 kW Teža: 650 kg Transportne dimenzije: 1800 x 1000 x 1200 mm

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Kedetq U A Ijpfx Afnjdw

Stanje: rabljeno, Leto izdelave: 2020, Technical Details: Turning diameter: 670 mm Turning length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Max. swing diameter over bed cover: 700 mm Travel paths turret no. 1 (milling spindle) x/y/z: 495 / ±150 / 1562(+164) mm B-axis rotation: -30° / +210° Rapid traverse turret 1 (milling head) x/y/z: 40/40/40 m/min Milling spindle speed: 12000 rpm Drive power – milling spindle: 20.2/18.8 kW Torque milling spindle: 120 / 44 Nm Tool interface milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool-to-tool, milling spindle: 1.25 s Spindle 1 speed: 3000 rpm Spindle 1 power: 36 / 30 / 25 kW C-axis spindle 1: 0.001° Bar capacity spindle 1: 102 mm Spindle 2 speed: 4000 rpm Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0.001° Bar capacity spindle 2: 80 mm Kdjdpfx Aewl Ag Dsfnjw Space requirement approx.: 7.8 x 3.6 x 2.9 m Linear glass scales on axes: X, Y Programmable steady rest: KLU-A530 & SLU-X3.2 Accessories: Chip conveyor Tool measurement Spindle load monitor Air blow system Air blow system through ICS system to the tool Spindle 1 power chuck Kitagawa 250 (B 210) mm Spindle 2 power chuck Kitagawa 250 (B 210) mm Interface for internal coolant supply 70 bar Tailstock specification for sub spindle Workpiece measurement with Renishaw OMP60 probe Detachable handwheel Workpiece and total counter Three-color signal lamp Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear viewing window Quick clamping cycles Program restart Four-color signal lamp Ethernet I/P interface Manual tool measuring arm Automatic door Oil mist separator Oil skimmer Spindle touch probe for workpiece measurement External air blow system sub spindle Spindle 1 coolant nozzle Spindle 2 coolant nozzle Coolant gun Internal coolant supply 70 bar with Knoll filtration A high-spec CNC turning and milling center with sub spindle, which can also be used with tailstock functionality. The machine has an automatic door and Matris Robot System type R-2000iC/165F.

Stanje: dober (rabljeno), Leto izdelave: 2009, Production line for windows Weinig Conturex C 114 Year of manufacture: 2009 Working width: 25–260 mm Working height: 25–110 mm Table length PowerGrip: 4 x 2280 mm Workpiece length: 200–6000 mm Ksdpfx Afeuzu Tyjnodw

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Machine width: 890 mm Machine height: 1,100 mm Kdjdpspfatpefx Afnew Weight: 400 kg

Leto izdelave: 2023, Stanje: novo, On-site nitrogen generation system for the production of a wide range of purities, pressures, and flow rates. The system is composed of high-quality components such as filters and adsorbers, a nitrogen separation unit from Parker Hannifin, and compressors from Kaeser. If high-pressure compression is required, we cooperate with Bauer Kompressoren. Over 400 such systems have been installed for our customers. Kodpfx Aenq Di Tjfnsdw All systems are custom-assembled and adapted by us to your spatial requirements and operational needs. We also design and implement containerized systems for both indoor and outdoor installation. We look forward to your inquiries...

Stanje: rabljeno, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 - 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long motorized adjustable infeed fence Pre-milling unit for jointing before the gluing station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-downs Adhesive application station GLU-JET automatic. Cartridge and PU gluing. Thin-film technology Adhesive height adjustment / contact nozzle Max. edge height 60 mm Pressure unit with 4 rollers, motorized-pneumatic. NC servo axis End trimming unit for coil and strip material up to 20 mm edge thickness, with electro-pneumatic adjustment from 0-10° angle for trimming saws Flush milling unit 20 mm MOT3, motorized horizontal adjustment. Multifunction milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC-controlled axes, for milling the upper and lower longitudinal edge and copy milling the front and rear vertical end edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-sensing Demand-controlled oscillating buffing unit for finishing and edge polishing with 2 textile discs Spray unit in infeed and outfeed area, as well as antistatic agent at the pressure unit Infeed area electronically controlled separator agent spraying device Pressure unit electronically controlled antistatic agent spraying device Outfeed area electronically controlled cleaning agent spraying device with cleaning agent Automatic chain lubrication Barcode scanner Machine has FACTORY SERVICE MAINTENANCE and is in EXCELLENT CONDITION Year of manufacture 2021 / Leasing option available Machine is connected in the demonstration center and ready for demonstration Kdsdpfoxnmu Iox Afnew Available from stock Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered Kedpjxfaf Usfx Afnjdw OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.