Obdelovalni center

HOLZ-HER Evolution 7405 PinJet

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten Lhodsdfgg Iepfx Adksd D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Cormak MJ45-KB4 sliding table saw with scoring unit is an advanced machine, also known as a panel saw with a scorer. It is the ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Construction and design: The Cormak MJ45-KB4 is a robust woodworking machine with a durable steel frame ensuring stability during operation. The large worktable, guided on hardened steel rods with a carriage length of 3200 mm and cutting units mounted on it, guarantees high efficiency and precision. Main cutting unit: Scoring unit: A key feature of this saw is the scoring unit, designed to eliminate internal stresses in wood by pre-scoring the underside of the workpiece. This feature makes the wood less prone to cracking and deformation after cutting. The 0.75 kW scoring unit motor ensures reliable trimming. Saw blade: The Cormak MJ45-KB4 sliding table saw is equipped with a circular saw blade as its main cutting tool. The electric motor drives the saw blade, enabling precise material cutting. With a 350 mm diameter blade, the maximum cutting height is up to 105 mm. Manual scorer adjustment: Simple and efficient manual adjustment of the scoring unit allows for quick and precise calibration. Stops facilitate restoring previous settings, while intuitive positioning near the operator’s workstation enables adjustments without interrupting workflow. Features and functions of the sliding table saw: - Large work surface: The saw features a spacious tabletop, simplifying the handling of larger sheets of material. - Smooth feed: The feed system utilizes precision-hardened steel guides with steel ball bearings, enabling longitudinal trimming even of long sheets or plywood. - Angle and cutting depth adjustment: Adjustable cutting angles and depths allow the tool to be tailored to specific project needs. - Safety systems: The saw is equipped with safety features such as guards and emergency stop systems to ensure operator safety. Applications of sliding table saws with scoring unit: Sliding table saws with scoring units are mainly used in woodworking and window manufacturing industries for cutting wood and wood-based materials. They are perfect for cutting boards, chipboards, MDF panels, and other similar materials. The Cormak MJ45-KB4 is a highly precise, advanced tool. Technical specifications: Table dimensions: 990 x 575 mm Format table length: 3200 mm Rip capacity at the rip fence: 1250 mm Cross-cut capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade height: 0–105 mm Saw blade height at 45°: 0–73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring blade speed: 8000 rpm Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Extraction port diameter under the table: 100 mm Lhodpfx Adjtz Smioked Extraction port diameter on blade guard: 80 mm Machine weight: 680 kg Saw supplied without cutting blades The price does not apply to machines sold in Poland.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms Ljdpfxefi Tg Hj Adkehd External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm Lodpfowka S Ijx Adkehd - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Lhodpfxexranpe Adksd Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: zelo dobro (rabljeno), Panel dividing saw - horizontal - with rear lifting table Control: MCS Evolution Software Powered roller conveyors (approx. mm 4500 x 2200) Lifting table (mm) 4300 x 2200 Panel rotating device (for boards) through 90° Ljdpfx Adeq Rfahekshd No. 2 rear pushers (1 with clamping grippers) Program-controlled pusher division No. 10 grippers Max. cutting width (mm): 4300 Useful stroke of the loader (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 133 Scoring saw (max. saw diameter) mm: 20 Main saw (max. saw diameter / power) mm: 460 - 27 kW Variable saw carriage feed (m/min): 0 - 150 No. 4 front air cushion tables Total connected load (kW): 36 (approx.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HOLZMA PROFILINE HPL 380 Podatki o rezu in dvižni mizi Dolžina reza: 4.300 mm Lhodpfxex Nf Eqj Adksd Velikost reza z dvižno mizo: 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (maks.): 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (min.): 1.200 mm x 400 mm Višine skladov Višina sklada na dvižni mizi ob postavitvi na ravni tal (maks.): 560 mm Višina sklada na dvižni mizi ob postavitvi v jami (maks.): 780 mm Nosilnost dvižne mize (maks.): 4 t Valjčne tirnice Valjčna tirnica, 10-stezna: 1 kos Valjčna tirnica, 2-stezna: 6 kosov Vpenjalne klešče Razmiki: 75/275/475/1.075/1.825/2.625/3.425 mm Odsesovalne in zračne mize Pozicija odlagalne naprave: 2.375 mm Zračna miza z valji 2.160 x 800 mm: 1 kos Zračna miza z valji 2.160 x 650 mm: 3 kosi Centralni ventilator: 1 kos Razvodna cev za zračne mize: 70 x 70 mm

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: Lhjdpfotwm Ubsx Adksd The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Ljdpfoukhd Aox Adkjhd Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Lhsdpfx Aod Nt Rqedkod Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°