Sistem zarezovanja

Ficep 1201 FRC

Stanje: dober (rabljeno), Leto izdelave: 2016, FICEP 1201 FRC Minimalni profil mm: 80 x 42 Maksimalni profil mm: 1220 x 60 Cedpfxjva Hfnj Afnopw 1 x gorilnik za rezanje z gorljivim plinom (OXY FUEL) 1 x plazemska gorilna naprava HYPERTHERM HPR 260XD Sistem za odsesavanje prahu.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Cedeu Aa I Sjpfx Afnepw Test graphics: Graphical display of drilling patterns Data interfaces: USB

Leto izdelave: 2009, stanje: dober (rabljeno), Lifting capacity: 30 t Precision lift Lifting height: 9 meters Cpedpfxoqiz N Re Afnsw

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve Cjdjfg E Hlopfx Afnepw • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Getriebebohr- und Fräsmaschine Fervi T047/400VDA mit Gewindeschneidfunktion 400V 1,5kW NEUE HERSTELLUNG „CE“ Aktionspreis – nur einmal verfügbar, solange der Vorrat reicht. Die Maschine eignet sich für folgende Bearbeitungen: - Fräsen - Bohren - Gewindeschneiden Bohrleistung in Gusseisen (mit Vorbohrung): ø 40 mm Maximale Bohrleistung in Stahl (mit Vorbohrung): ø 32 mm Fräskapazität mit Wendeplattenfräser: ø 80 mm Fräskapazität: ø 25 mm Gewindeschneidleistung: ø 22 mm Konusaufnahme: MK 4 Spindelhub: 130 mm Pinolendurchmesser: ø 76 mm Säulendurchmesser: ø 115 mm Kopfneigung: ± 60° Spindeldrehzahl (12 Stufen): 75 – 3200 min⁻¹ Codpfx Aeg Npiwsfnopw Drehstrommotor: 400 V 50 Hz 1,1 – 1,5 kW Tischgröße: 585 x 190 mm T-Nut: 12 mm Sockelmaße: 648 x 412 mm Gesamtmaße: 740 x 790 x 1960h mm Gewicht: 390 kg.

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min Cpsdpfx Afod Iipmonew • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm Cpodpfxslgvkij Afnsw - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: novo, Leto izdelave: 2025, KOMPAKTNA RAZTEGLJIVA KOMORA ZA PRŠENJE TEKOČIN Raztegljive komore za pršenje so zasnovane za ročno nanašanje barve s stranskim izsesavanjem, namenjene izločanju razpršene tekoče barve. Prednost raztegljivih komor je prihranek prostora v delavnici. KONSTRUKCIJA Izdelana je iz škarjastega sistema karoserije, sestavljenega iz elektrogalvaniziranih pravokotnih in okroglih cevi, zunaj pa je prekrita s PVC platnom. Gibljivi sistem vključuje industrijska kolesa ali vodila z drsnimi kolesi; izbira je odvisna od tega, ali je uporaba zunanja ali notranja ter od dolžine komore. Vrata so zasnovana kot zavesa, ki se zapre med samim nanosom barve. SISTEM VENTILACIJE Csdpfx Afovxfkaonjpw Stransko izsesavanje zagotavlja visoko učinkovitost med nanosom barve. Filtrirna stena je modularne izvedbe iz pocinkane pločevine, z integriranimi policami ter zasilnimi vrati na obeh straneh. Izsesovalni ventilator je nameščen na vrhu filtrirne stene, električni motor ventilatorja pa je zunaj zračnega kanala, kar preprečuje stik motorja z onesnaženim zrakom in s tem zmanjša tveganje za iskre. SISTEM FILTRACIJE Izsesovalni filter je dvostopenjski in zagotavlja 99,9 % učinkovitost; nameščen je na stranski filtrirni steni komore. Pred-filter se nahaja pri vratih v obliki zavese, ta zagotavlja naravni pretok zraka med delovanjem izsesovalnega ventilatorja. Kontrolna plošča ima opozorilno luč, ki vas opozori na potrebno servisiranje ob zamašitvi filtrov. Izdelano v Turčiji CE oznaka Ponujamo najboljše tehnične rešitve in konkurenčne cene! * Pisarna v Franciji in Nemčiji. Kontaktirajte nas za več informacij in ponudbo.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 295.000 km, moč: 405 kW (550,65 KM), prva registracija: 10/2015, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2015, obratovalne ure: 1.828 h, Oprema: električno nastavljivo ogledalo, klimatska naprava, spojka prikolice, = Dodatne možnosti in oprema = - Aluminijast rezervoar za gorivo - Ojačevalnik zavor - Nizka raven hrupa - Zračno vzmetenje Cjdpew Rc E Asfx Afnspw - Sončna zaslonka - Ksenonska razsvetljava - Kardanska gred (PTO) - Vlečna kljuka = Dodatne informacije = Konfiguracija osi Sprednja os: Krmiljena Zadnja os 1: Krmiljena Teže Lastna teža: 18.505 kg Nosilnost: 11.070 kg DGV: 29.500 kg Funkcionalno Dimenzije tovornega prostora: 420 x 255 cm Dvigalka: Da Znamka nadgradnje: Palfinger PK 53002-SH G CE označba: da Stanje Tehnično stanje: zelo dobro Videz: zelo dobro Finančne informacije Cena: Na povpraševanje

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Codpjd N H A Nofx Afnspw Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition