Avtomatska hladna krožna žaga za rezanje pod kotom, avtomatska krožna žaga, proizvodna žaga

KALTENBACH KKS 400 NA

Leto izdelave: 1988, Stanje: rabljeno, številka stroja/vozila: 109357, Saw blade Ø: 400 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 240 x 85 mm Cutting capacity in miter at 45° square: Flat profiles 180 x 70 mm Djdpfx Ajb Sciasflsul Cutting speeds: 10/20 m/min Feed rates: 0 - 1000 mm/min electrical connection: 400 V, 1.7/2.6 kW Required space: 2750 x 1500 x 1900 mm Weight: 1350 kg

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides Dujdpfx Ajfg Rldjfljl • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: novo, Leto izdelave: 2025, Quick mitre adjustment from 30° to 150° steplessly with 0.5° accuracy according to scale. The mitre pivot point is at the intersection of the saw blade and the material stop, ensuring no change in the length dimension. End stops at 30° + 45° left and 30° + 45° right. Manual material clamping. In every frame angle position, the material is clamped parallel at 90°. Cutting pressure reduction is achieved by the dead weight of the heavy, torsion-resistant saw frame, with fine adjustment according to material cross-section via a hydraulic damping cylinder. Standard with coolant system, which can optionally be supplemented by a micro-dosing unit. Machine base with chip collection tray. Saw blade drive with end shut-off. Precision saw blade carbide roller guides. Paint finish in silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw blade mounted on the machine 4/6 TPI Operating manual and spare parts list on CD-ROM. Optional equipment: Hydraulic lifting of the saw frame Version Manual Mitre capacity: 30° left ø 130 mm; square 120x120 mm 45° left ø 200 mm; square 180x180 mm Dsdpfx Ajbi S Diofloul 90° ø 260 mm; square 300x260 mm 45° right ø 200 mm; square 180x180 mm 30° right ø 130 mm; square 120x120 mm Motor: [kW] 1.8 Saw blade: [mm] 3350x27x0.9 Saw blade speed: 35/75 m/min Working height: [mm] 900

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Dusdpfx Afepy Eldslol Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 Dsdpfsh S Nxpox Afleul 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: novo, Thread Diameter: M6 - M24 mm Speed: 200 rpm Radius: 1200 mm Adjustable Angle: 0 - 90 degrees Machine Weight: approx. 0.4 t Required Space: approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise threading with a freely positionable swing arm - Machine head swivels from 0 to 90 degrees Dsdpfx Afeg N Nl Dsloul - Quick-change chuck with slip clutch for safe threading with no risk of breakage - Forward/reverse operation selectable on the machine head - Thread size, speed, pitch, and thread depth adjustable via touchscreen on the swing arm - Manual mode: once the preset thread depth is reached, the spindle stops automatically; forward and reverse must be manually activated - Automatic mode: after reaching the preset thread depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes Includes one each of thread tapping chucks GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame: 900 x 600 x 875 mm

Stanje: novo, Leto izdelave: 2021, Bernardo AKPL 1600 x 40 Press Brake Technical Data: Pressing force: 40 t Bending length: 1600 mm Distance between uprights: 1200 mm Stroke length: 100 mm Back gauge: 0 – 500 mm Throat depth: 200 mm Table width: 150 mm Dedpsftuywjfx Aflsul Table height: 760 mm Approach speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec Oil tank capacity: 130 litres Motor power: 4.0 kW Width: 2050 mm Depth: 1800 mm Height: 2030 mm Weight approx. 3,030 kg

Stanje: dober (rabljeno), Preša za upogibanje Znamka: AMADA Dodpjwivddjfx Afleul Tip: HFT 80/25 Kapaciteta: 2500 x 80T 4 osi Razdalja med stebri: 1800 mm Dimenzije: 3500 x 1500 x 2100 mm Teža: 6.500 kg Opremljena z novimi in rabljenimi orodji

Stanje: rabljeno, Leto izdelave: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum speed: 8,000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 travel: 320 mm X1 travel: 50 mm Y1 travel: 255 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 25 mm Slide 1 Tool Mount: Duodpfx Afotzyx Tolol Tool positions Fixed, with tool shank 16 x 16 mm: 5 units Slide 2: X2 travel: 165 mm Z2 travel: 200 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 30 mm Slide 2 Tool Mount: Number of turret stations with integrated spindle: 8 units Number of axial live tools (integrated): 8 units Coolant tank, approx.: 400 l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub-spindle - 2 double drill holders for rear machining support with cylinder - Sub-spindle parts ejector

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 300 mm, Visio 500 optična/taktilna 3D merilna naprava 453 (400 X, 500 Y, 300 Z) pomično območje. Merilna programska oprema: PC-DMIS CAD verzija 2015 Menjalnik za sonde s 6 mesti, skupno z 2 moduli TESASTAR MP Dodpfx Asiyymrjflsul Silent PC Big Tower z Windows 7 (vse je nameščeno in deluje) Kamera z 200-kratnim optičnim zoomom z obročasto/koaksialno osvetlitvijo in prehodno svetlobo (diascopsko) Vse popolnoma deluje. Y-os ima rahle praske. So bile zbrušene. To ne vpliva na funkcionalnost ali natančnost.