Stroj za ledene drobce

Higel HEC 141 EB11

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet coding, extended conveyor belt, and dosing bar (incl. pearlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: cold filling. Round cup plastic buckets/plastic cups/plastic bucket 2: Diameter 175 mm x height 131 mm / diameter 104 mm x height 55 mm or 65 mm / diameter 227 mm x height 194 mm. Dimensions (L/W/H) and weight, excluding discharge conveyor and control cabinet: 2200 mm / 2200 mm / 3200 mm and approx. 3500 kg. Djdpfx Ajr Dd H Sek Djkt

Stanje: dober (rabljeno), Tehnični podatki so prikazani na slikah. Dedpfx Akjp N Aq Ho Djkt

Stanje: zelo dobro (rabljeno), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area Heatsink + Front Wall Bracket, and 3.3 Assembly Area Front. (KK = Heatsink, SW = Front Wall Bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and PCB enters the dispensing area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt and fixed in place. - Next, the x-y-z handling system moves the dispensing head to the specified location and starts the dispensing process. - After successful dispensing, the handling system moves into the park position and the WT is set back onto the belt. - The carrier is then conveyed to the Assembly Area Heatsink + Front Wall Bracket (provided there is no WT in the placement position). St.3.2: Assembly Area Heatsink + Front Wall Bracket - A WT moves from the dispensing area into the Assembly Area Heatsink + Front Wall Bracket via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), lifted off the belt, and fixed in place; at the same time, the chassis side walls of the partially assembled unit are aligned. - Simultaneously, the heatsink tray and front wall tray are positioned. - A stack of 12 heatsink trays and a stack of 12 front wall bracket trays are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety interlocks are opened and the loaded tray stacks move into the gripping position of each stacker. - The safety interlocks close again. - The corresponding grippers pick up the respective tray. - The tray is separated and transported upwards with the stacker z-axis to above the actual pick-up height. Dedsibx S Nepfx Ak Djkt - To center and stabilize the tray, a centering support is pushed and positioned underneath each tray by the x-handling system. - With the stacker z-axis, each tray is set onto its corresponding centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the heatsink (KK) is gripped from the tray and placed in an intermediate alignment position (to compensate for pickup inaccuracies and ensure a repeatable gripping position for assembly). - The heatsink is scanned, picked up again, and if the scanner result is OK, it is assembled onto the WT. - If not OK, the heatsink is placed in an NOK box. - The SCARA robot multi-gripper then picks up the front wall bracket (SW) from the tray and places it in the alignment position. - The front wall bracket is picked up again and assembled onto the WT. - Proceed to Assembly Area Front. Technical Data Model: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Allowable moment of inertia: nom. 0.02 kg*m², max. 0.25 kg*m² User cabling electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Ø outer: 25 mm Press-in force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting type: ceiling IP Protection class: IP20 Power and signal cables: 3m Financing through our bank is also possible. Complete offer at komplett-konzept.leasingo.de

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 14 h, laserska moč: 25 W, skupna širina: 405 mm, skupna višina: 421 mm, skupna masa: 37 kg, največja dolžina izdelka: 260 mm, Ta 3-osna laserska naprava za označevanje, model KEYENCE MD-X2500A, je bila izdelana v letu 2023. Ima območje označevanja 125 x 125 x 42 mm in največjo hitrost skeniranja 12.000 mm/s. Naprava deluje z laserjem YVO4 in ima izhodno lasersko moč 25 W. Če iščete visokokakovostne možnosti označevanja, razmislite o modelu KEYENCE MD-X2500A, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. - Vrsta laserskega označevalnika: YVO₄-laser, laserski izdelek razreda 4 - Valovna dolžina: 1064 nm - Izhodna laserska moč: 25 W (izmerjeno: 24,90 W, 27. februar 2026) - Frekvenca Q-stikala: CW (kontinuirano), 1 do 400 kHz - Pilotni laser: polprevodniški laser (683 nm, 5,0 mW, razred 3R) - Vodilni laser / kazalnik delovne razdalje: polprevodniški laser (655 nm, 1,0 mW, razred 2) - Območje označevanja: 125 × 125 × 42 mm - Standardna delovna razdalja: 189 mm (±21 mm) - Ločljivost označevanja: 2 µm - Hitrost skeniranja: maks. 12.000 mm/s - Nazivna napetost in poraba energije: 100 do 240 VAC ±10 % (50/60 Hz), maks. 850 VA - Delovna temperatura: temperatura okolice 0 do 40 °C (shranjevanje: -10 do 60 °C) Dkedozqth Tspfx Ak Dot - Stopnja zaščite: IP64 (glava za označevanje) - Vrsta hlajenja: prisilno zračno hlajenje - Dimenzije in teža (krmilna enota): 260 × 405 × 421 mm; teža: 23,0 kg - Dimenzije in teža (glava za označevanje): 145 x 432,5 x 230 mm; teža: 13,8 kg - Čas delovanja krmilne enote: 14–15 ur - Čas delovanja laserja: 13–14 ur - Čas delovanja skenerja: 0 ur - Število aktivacij zaklopa: 36–40 - Skupno število označevanj: 52–55 - Vključeno v dobavo: glava za označevanje, krmilna enota, razširitev za sledenje v smeri Z (MD-AD-ZT), razširitev za 3D-funkcijo (MD-AD-3D), programska oprema Marking Builder Plus (MB-PH1 Ver. 2.4.0), navodila za uporabo, originalna embalaža KEYENCE.

Stanje: rabljeno, Steel staircase, exterior staircase, machine staircase, machine access steps, attachment staircase - Machine staircase: robust design, suitable as machine access steps Djdpfeiay Hdox Ak Djkt - Material: stainless steel - Step height: approx. 310 mm - Height: upper step approx. 1680 mm - Transport dimensions: 1770/535/H190 mm - Weight: 29 kg