Ekscentrični pritisk - enojni stolpec

HELMERDING ERL 150 B

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Dedpjfxyhfsfx Agpeup Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Capacity: 100 tons (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and ram: 445 mm * Stroke adjustment: 0 - 132 mm * Ram adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings, grade SnBz-12 * Pneumatic clutch-brake combination * Completely enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * 6-way ram guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted to a standard machine) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower; mechanical or pneumatic) * Material feed, loading and unloading systems (decoiler, recoiler, straightener, pneumatic or servo feeder) * Customized machine Dsdpfxjnxh T Rj Agpoup

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod Dujdpjgpxc Ssfx Agpop - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: novo, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will prepare an attractive offer including installation and service. Over the past years, ISGEC has supplied to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your enquiry. Dusdpfof Rt Irex Agpjp

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Djdpfxecxxx Hs Agpeup Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Duedocubatepfx Agpep Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition Dodpscxxx Rjfx Agpjup

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Dodpshlnzkofx Agpjup Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Stanje: rabljeno, Leto izdelave: 2010, Suitable for the automatic grinding of tooth face, tooth back, and blade body on carbide-tipped circular saw blades in a single clamping operation. All common tooth geometries (flat, alternate, trapezoidal tooth, etc.) can be ground automatically and in a single pass. Accessories: - Full enclosure - Measuring probe - Device for grinding with oil cooling - Automatic fire extinguishing system - Grinding mist extraction N 183 - Alphanumeric keypad - Oil catch tray - Machine lamp Saw diameter: 80–840 mm Bore diameter: from 10 mm Duodpfjwp Eblex Agpsp Blade thickness: < 8 mm Tooth pitch: 6–120 mm Cutting length:

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2023, EN: For sale: a complete and operational steel sheet roll forming line for coil material such as Magnelis, configurable for various profiles (e.g., C-type) used in photovoltaic installations and farms, steel structure halls, shelters, as well as in furniture manufacturing, etc. The line, including decoiler, is installed in a heated hall under near-laboratory conditions. It is possible to run a test operation before purchase. I have contacts for companies supplying custom profiling roller sets for specific profiles and for firms specializing in machine upgrades and expansions. For more information, please call. I do not respond to written messages. A VAT invoice will be issued for the production line. Djdpfju A U Utsx Agpeup