Enoslojna stiskalnica - hidravlična

DUNKES HZ 40 (CE)

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Ksdpfx Aod Nl E Uebhond Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: pripravljen za uporabo (rabljen), EPAL board chamfering machine, brand CAPE, in working condition. Maximum length 2500mm. Kedpfjk Nf S Uox Abhsnd

Leto izdelave: 1965, Stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations Knsdpfx Aocubatobhod - operating manual available

Stanje: rabljeno, Leto izdelave: 1996, Charge weight 135 liters Outer tank diameter 1220 mm Tank diameter / Tank height 1,220 / 1,035 mm Working basin width 304 mm Motor power 0.75 kW Motor speed: 1500 rpm Operating voltage 400 V Machine weight approx. 600 kg Space requirement approx. 1.38 x 1.28 x 1.04 m Vibratory finishing machine - Factory No.: 15772 / 96-08 - Machine ON time: 44,854 h Kedpfjwcg Erox Abhsnd - with drum heating

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Log sorting yard complete with 66 boxes + Nicholson debarker (35" diameter) Knjdpfsvtmqwsx Abhjd

Stanje: rabljeno, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination Kodpjcp Apyefx Abhsnd - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen - Foot switch

Leto izdelave: 2020, Stanje: novo, Oxygen and temperature measurement in molten metals Knedpfjgqr A Dsx Abhsd

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Kjdpfx Abofxyhfshjnd Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Hidravlična lestev za okrogle hlode, primerna za premer hlodov od 7 cm do 66 cm. Kodev N Eiqepfx Abhond

Leto izdelave: 1978, Stanje: rabljeno, Pressure 100 t Outreach 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Kjdpfjlp U Dpox Abhond Ram surface 600x500 mm Table surface 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Pressing time