Stroj za robne trakove

HEBROCK F2 Next

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Djdpfxoi Am U De Aflewa Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Dwsdpfx Aerigxyoflea Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available - Dwedpfx Asdqzcxeflea

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Dwedpfx Asg Tu Rkjflsa Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Equipment for short workpieces

Stanje: novo, Leto izdelave: 2026, A550 Vollautomatische Massivholzsäge 9 m Vollautomatisches Schneiden von mittelgroßem bis großem Vollholz mit benutzerfreundlicher Automatisierung. Legen Sie irgendein Holzstück ab und die Maschine erkennt es automatisch und schneidet es mit hochpräziser Servomotor-Materialpositionierung entsprechend den eingegebenen Zuschnittsaufträgen. Import von Excel-Auftragslisten über WLAN für effiziente Übernahme großer Schneidlisten. Ihre vollautomatische Säge kann optional als Inline-Optimierungssäge geliefert werden. Jedes aufgelegte Holzstück, ungeachtet der Länge, wird von einem Lasersensor vermessen. Unser leistungsfähiger Optimierungsalgorithmus verarbeitet Ihre Zuschnittliste und kalkuliert den optimalen Abschnittsplan, sodass der Verschnitt minimiert wird. Dieser Vorgang erfolgt in Echtzeit während des Maschinenbetriebs, ohne dass ein Eingriff Ihrerseits erforderlich ist. Ausstattung: • Vollautomatischer Schneidbetrieb mit Stangen-/Riegelzuführung und Längenzuschnitt Dsdpfjf Ekngsx Aflswa • Einfache Benutzeroberfläche für den vollautomatischen Betrieb, Auftrag eingeben und in Sekunden schneiden • Komfortables Schneiden von Einzelteilen, Serien oder umfangreichen Excel-Listen • Bündel-/Mehrfachstangen-Schnitt und automatische Zählfunktion • Remote-Eingabe von Excel-Auftragslisten per WLAN mit umfassenden Datenzuordnungsmöglichkeiten • Vollständig einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Produktivität • Automatischer Etikettendruck für Teile basierend auf den Auftragsdaten (manuelle Etikettenanbringung, optional) • Direktdruck auf das Material während des Durchlaufs ohne Bedienereingriff (optional) • Barcode- oder QR-Code-Druck/-Scan für Auftragsdatenerfassung (optional) • Automatisierte Servo-Einstellung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Rahmen- und Fachwerkproduktion • Fertigung von Gartenhäusern/Holzhütten • Möbelherstellung • Gehrungs-Holzkonstruktionen • Serienmäßiger Zuschnitt großer Holzvolumina Modell: A550 Schnittlänge: 9 m Materiallänge: 8.580 mm Schubkraft: 20–40 kg Software: Optimierer HOCHWERTIGE, IN AUSTRALIEN HERGESTELLTE MASCHINEN.

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Type: FK-1-500 // Serial No.: 151166 // Part No.: 150.01.0001 Dwedpfod Nd T Uex Aflja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Brandt KDF 1440 Edition Only 1,700 operating hours – very good condition – can also be supplied with preheating station XES 200 Autark (+ €4,500) SUMMARY OF UNIT CONFIGURATION: JOINTING CUTTER UNIT 2 x 2.2 kW 200 Hz GLUING UNIT QA 65 N END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.18 kW PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 OPPOSING CUTTERS PNEUMATIC 2-POINT ADJUSTMENT CONTOUR MILLING UNIT 1 x 0.35 kW WD 60; also suitable for subfloor panels PNEUM. 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Upper pressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spraying unit for workpieces Automatic edge feed Multiple roller sensing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Min. workpiece width: – For workpiece thickness 8-22mm: 70 mm* – For workpiece thickness 23-40mm: 120 mm* – For workpiece thickness 41-60mm: 150 mm* *Depending on workpiece length – Workpiece projection: 38 mm – Workpiece thickness: 8 – 60 mm – Edge height max. = workpiece height + 6 mm – Edge material, coil: 0.4 – 3 mm – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. coil diameter: 830 mm – Edge material, strips: 0.4 – 8 mm Dedpjzb Iggefx Aflowa – Max. edge cross-section: – For strips: 360 mm² – Feed speed: 8 – 14 m/min – Max. feed speed with contour milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Full description: see PDF

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Heidelberg GTO 52 Letnik 1996 Prahovno nanašanje Dsdpfxszpamge Aflowa Vlažilni sistem Varn Kompac

Stanje: novo, Technical data: Dsdpfxog A D Anj Afljwa Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Djdpfx Aoi Dfidjflewa Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -