Dizelski viličarji

HC Hangcha CPCD38-XRW92F

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Kwsdovwlqqjpfx Abbot Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2003, obratovalne ure: 43.000 h, Stanje: potreben popravila (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Hardox bodemvloerplaat uitsluitend Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze pers kan tevens volledig gereviseerd worden verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Hierbij geldt een garantie van 2 jaar. Neem contact met ons op voor meer informatie of een vrijblijvende offerte. Algemene principes van revisie Reiniging & demontage Voordat de revisie daadwerkelijk plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten nagemeten en waar nodig opnieuw gelast. Dit geldt in elk geval voor de volgende onderdelen: • Aanpersplaat (ram) • Frame • Kanaal • Voorpersklep Na demontage en inspectie wordt de ram opgelegd en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden waar nodig uitgedeukt en gerepareerd. Overspuiten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen & slangen worden vervangen. De hydraulische componenten worden voorzien van nieuwe pakkingen. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en waar nodig vervangen. Alle aansluitdozen worden vervangen en gemonteerd op goed toegankelijke locaties. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vernieuwd. Kwsdpfx Aekcgynobbet Cilinders: De cilinders worden opnieuw verpakt en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast: De schakelkast wordt gecontroleerd en gereinigd. Waar nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieninterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Kwjdpfxjtvau As Abbst Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. Kwsdpfetvat Tex Abbet It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Kwedpfsv T I Evsx Abbst Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), obratovalne ure: 2.658 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 71 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.620 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 600 kg, vhodni tok: 200 A, kapaciteta rezervoarja za olje: 1.250 l, lastna masa: 29.000 kg, Technical Data - Baler: Manufacturer: BOA Recycling Systems B.V. Model: Impress M75-45-A-5-1.6 Ecoline Year of Manufacture: 2021 Operating Hours: 2,658 hours (as of May 2024) Number of Bales Produced: 42,212 (as of May 2024) Main Pressing Force: 71.2 kN (71 t) Specific Pressing Force: 9 kg/cm² Operating Pressure: 280 bar Cylinder Stroke: 2,200 mm Feed Hopper Dimensions: 1,620 x 1,000 mm Filling Volume per Pressing Cycle: 2.4 m³ Theoretical Cycle Time: 21 seconds Theoretical Throughput Capacity: 450 m³/hour Bale Dimensions: 1,100 x 720 mm, length adjustable up to 1,400 mm Drive Power: 45 kW Total Connected Load: 100 kW Power Consumption: 200 A Tying: 5-fold vertical, fully automatic; press ram is prepared for additional 3-fold horizontal tying Throughput Rates at Bulk Densities of: Kwjdpfx Asu Thcvobbet - 30 kg/m³: approx. 13.6 t/hour - 60 kg/m³: approx. 24.2 t/hour - 100 kg/m³: approx. 36.4 t/hour - 150 kg/m³: approx. 54.7 t/hour Bale Weights: up to 600 kg (material-dependent) Hydraulic Tank Volume: 1,250 L PLC: Siemens S7 1500 Control Panel: Siemens SIMATIC HMI TOUCH Transport Dimensions of Baler: 10,000 x 2,800 x 3,385 mm (L x W x H) Height Assembled with Feed Hopper: 4,743 mm Height Assembled with Conveyor Belt: 7,123 mm Machine Weight (Baler): 29 t Noise Level:

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Wet waste compactor, press container Bergmann MPB405 SN/10 suitable for skip loaders 10 m³ usable volume inspected, serviced, fully operational Painting in desired RAL colour possible Kodpfsvmwpwex Abbewt We are happy to provide an offer including delivery.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 19.187 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 140 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.500 kg, skupna masa: 52.000 kg, Technical Data - Baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 140 Year of manufacture: 2017 Operating hours: 19,187 hours (as of October 2025) Main press force: 140 t (max. 153.5 t) Pre-press force: 70 t Feed opening dimensions: 1,600 x 1,100 mm Filling volume per cycle: 4.34 m³ Theoretical cycle time: 16 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 75 kW Connected load: 226 kW Total current consumption: 428 A Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: - 30 kg/m³: approx. 30 t/h - 50 kg/m³: approx. 46 t/h - 100 kg/m³: approx. 82 t/h Bale weights: 800 to 1,500 kg, depending on material and bale length PLC control (manufacturer, type): Telemecanique TSX Micro Kwodsxrta Eepfx Abbot Operator panel (manufacturer, type): Schneider MAGELIS Touch Installed dimensions with hopper and conveyor: 13,200 x 27,000 x 7,333 mm (L x W x H) Transport dimensions (baler only): 13,200 x 2,750 x 3,450 mm (L x W x H) Approximate machine weight (baler): 52 t Technical Data - Conveyor: Manufacturer: Bollegraaf Model: HBT 1216 Year of manufacture: 2017 Drive power: 7.5 kW Feed belt length: 6,750 mm Inclined belt length: 14,400 mm Gooseneck length: 2,150 mm Incline angle: 30° Usable width: 1,754 mm Side wall height (feed belt): 500 mm Side wall height (inclined belt): 800 mm Weight: 16 t Pit dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Notes: The baler is currently in operation and is scheduled to be replaced by a new machine in Q2 2026. Inspections can be arranged upon request. No liability is assumed for the technical specifications or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 24.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004283-0030, stiskalna sila: 122 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The unit concerns a Bollegraaf HBC120s baler (90kW), equipped with cross tying (5 vertical and 5 horizontal wires). At the time of writing, this baler is undergoing a complete overhaul at our refurbishment workshop. This refurbishment is carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S: Volume capacity m³/h max. – 815 660 500 Bulk density kg/m³ max. – 20 50 100 Weight capacity t/h max. – 16.3 33 50 The aforementioned capacities apply only if the machine is used properly and is fed continuously with suitable material for at least one uninterrupted hour. Bale weight – approx. 1,470 kg, depending on material type and bale length Bale length – variable / adjustable Bale height – 1,100 mm Bale width – 1,100 mm Hopper dimensions – 1,100 mm x 1,600 mm – These dimensions also determine the maximum size of material that can be loaded into the machine. Press force – max. 119.7 tons Pre-press flap force – max. 65 tons Cycle time, excluding wire tying – 19 seconds Main motor output – 90 kW (120 HP) Ksdpfoxcir Eox Abbswt Twistomat (knotter) motor – 1.5 kW (SEW) Counter pressure pump motor – 1.1 kW (2 HP) Needle installation motor – 7.5 kW (SEW) Oil cooler fan – 3 kW (4 HP) Oil cooling pump – 4 kW (5.5 HP) Operating pressure – 315 bar Machine weight – approx. 40,040 kg Number of wires – 5 vertical; 5 horizontal Oil volume – 1,655 liters Oil type – BP-SHF-46 Colour – baler in RAL 6024 (green); safety doors in RAL 1021 (cadmium yellow) Baler dimensions – length 11,765 mm; width 2,500 mm; height 7,104 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 34.480 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 19.000 kg, transportna višina: 3.300 mm, kapaciteta rezervoarja za olje: 750 l, moč: 45 kW (61,18 KM), Technical Data – Baler: Manufacturer: Bollegraaf Model: HBK 100 Year of manufacture: 2004 Operating hours: 34,480 hours Main ram pressing force: 100 t Pre-pressing force max.: 42 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume: 3.15 m³ Theoretical cycle time: 22 seconds Theoretical throughput: up to 450 m³/hour Bale dimensions: 1,100 x 720 mm; length variable Ksdoxbgnhepfx Abbowt Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput rates at bulk density: - 30 kg/m³: approx. 13 t/hour - 50 kg/m³: approx. 20 t/hour - 100 kg/m³: approx. 30 t/hour Throughput with air separator operation: approx. 20 t/hour Bale weight: 550 to 750 kg, depending on material Hydraulic oil tank volume: 750 L PLC control: Telemecanique TSX Micro Transport dimensions (excluding press): 10,900 x 2,320 x 3,300 mm (L x W x H) Machine weight (press): approx. 19 t Remarks: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but instead cuts the material between knives mounted on the pressing ram and a counter-knife in the frame. It is, therefore, a cutting-edge baler, comparable to models from Paal, unoTech, etc. The baler is in very good condition for its age, as it was used exclusively for baling paper from document destruction operations. The documentation (operating manual, CE certificate, electrical/hydraulic schematics) is complete. Inspection by appointment possible. We do not accept liability for the technical data provided or for possible errors.