LPG viličarji

Hangcha CPYD35

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 1.815 h, nosilnost: 3.500 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 1.410 mm, tip droga: triplex, gradbena višina: 2.240 mm, širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.500 mm, lastna masa: 4.995 kg, vrsta pogona: Treibgas, gradbena širina: 1.235 mm, LPG forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for use and fully operational Gtjdet Dd Azjpfx Ad Ajw Technical condition: very good Front tire type: Superelastic Front tire size: 8.15-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: 60 - 80% Description: Semi-cab with PVC side panels, lighting similar to road traffic regulations, 3rd and 4th hydraulic control valve to fork carriage, rotating beacon, manual levers, interior rear-view mirror Sideshift, fork positioner, ATIB fork positioner with sideshift, opening range: ID - ID 145-850 mm 3rd valve, 4th valve, rear work light, front work light, semi-cab, interior rear-view mirror, rotating beacon, windshield wiper, LED, seat,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Gtodpfx Aotvau Aod Aew Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 2.621 h, nosilnost: 3.500 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 1.410 mm, tip droga: triplex, gradbena višina: 2.240 mm, širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.200 mm, lastna masa: 4.995 kg, vrsta pogona: Treibgas, gradbena širina: 1.230 mm, LPG forklift Gtodpfx Ast Dd Ahod Aew Load centre: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres size: 8.15-15 Front tyres condition: 0 - 20% Rear tyres type: Superelastic Rear tyres size: 6.50-10 Rear tyres condition: 20 - 40% Description: Half-cab with PVC side panels, lighting according to road traffic regulations, 3rd + 4th valve to the fork carriage, rear working light, rotating beacon, manual levers Sideshift, fork positioner, Fork positioner with sideshift, opening range: IK-IK 150-860 mm 3rd valve, 4th valve, rear working light, front working light, half cab, full free lift, interior mirror, rotating beacon, windscreen wiper, LED, seat,

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 1.203 h, nosilnost: 3.500 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 1.410 mm, tip droga: triplex, gradbena višina: 2.240 mm, širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.500 mm, lastna masa: 4.995 kg, vrsta pogona: Treibgas, gradbena širina: 1.245 mm, LPG forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm Godpfot Dd Abex Ad Aetw ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 8.15-15 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: 60 - 80% Description: Semi-cab with PVC side panels, lighting similar to public road regulations, 3rd and 4th valve to carriage, rear work lights, beacon, hand lever controls Side shifter, fork positioner, Fork positioning with side shifter, opening range: ITA/IK 145-860 mm 3rd valve, 4th valve, rear work lights, front work lights, semi-cab, interior mirror, beacon, windscreen wiper, LED, seat,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45kW) equipped with vertical tying. Godpfjtvat Tex Ad Astw This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Gtjdpjv T I Evsfx Ad Aew Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Wet waste compactor, press container Bergmann MPB405 SN/10 suitable for skip loaders 10 m³ usable volume Gjdpfsvmwpwjx Ad Astw inspected, serviced, fully operational Painting in desired RAL colour possible We are happy to provide an offer including delivery.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 24.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004283-0030, stiskalna sila: 122 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The unit concerns a Bollegraaf HBC120s baler (90kW), equipped with cross tying (5 vertical and 5 horizontal wires). At the time of writing, this baler is undergoing a complete overhaul at our refurbishment workshop. This refurbishment is carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S: Volume capacity m³/h max. – 815 660 500 Bulk density kg/m³ max. – 20 50 100 Weight capacity t/h max. – 16.3 33 50 The aforementioned capacities apply only if the machine is used properly and is fed continuously with suitable material for at least one uninterrupted hour. Bale weight – approx. 1,470 kg, depending on material type and bale length Bale length – variable / adjustable Bale height – 1,100 mm Bale width – 1,100 mm Hopper dimensions – 1,100 mm x 1,600 mm – These dimensions also determine the maximum size of material that can be loaded into the machine. Press force – max. 119.7 tons Pre-press flap force – max. 65 tons Cycle time, excluding wire tying – 19 seconds Main motor output – 90 kW (120 HP) Twistomat (knotter) motor – 1.5 kW (SEW) Counter pressure pump motor – 1.1 kW (2 HP) Needle installation motor – 7.5 kW (SEW) Oil cooler fan – 3 kW (4 HP) Oil cooling pump – 4 kW (5.5 HP) Operating pressure – 315 bar Machine weight – approx. 40,040 kg Number of wires – 5 vertical; 5 horizontal Oil volume – 1,655 liters Gedpfx Adexcir Eo Ajtw Oil type – BP-SHF-46 Colour – baler in RAL 6024 (green); safety doors in RAL 1021 (cadmium yellow) Baler dimensions – length 11,765 mm; width 2,500 mm; height 7,104 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 34.480 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 19.000 kg, transportna višina: 3.300 mm, kapaciteta rezervoarja za olje: 750 l, moč: 45 kW (61,18 KM), Technical Data – Baler: Manufacturer: Bollegraaf Model: HBK 100 Year of manufacture: 2004 Operating hours: 34,480 hours Main ram pressing force: 100 t Pre-pressing force max.: 42 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume: 3.15 m³ Theoretical cycle time: 22 seconds Theoretical throughput: up to 450 m³/hour Bale dimensions: 1,100 x 720 mm; length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput rates at bulk density: - 30 kg/m³: approx. 13 t/hour - 50 kg/m³: approx. 20 t/hour - 100 kg/m³: approx. 30 t/hour Throughput with air separator operation: approx. 20 t/hour Bale weight: 550 to 750 kg, depending on material Hydraulic oil tank volume: 750 L PLC control: Telemecanique TSX Micro Transport dimensions (excluding press): 10,900 x 2,320 x 3,300 mm (L x W x H) Machine weight (press): approx. 19 t Gtodpfxoxbgnhj Ad Asw Remarks: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but instead cuts the material between knives mounted on the pressing ram and a counter-knife in the frame. It is, therefore, a cutting-edge baler, comparable to models from Paal, unoTech, etc. The baler is in very good condition for its age, as it was used exclusively for baling paper from document destruction operations. The documentation (operating manual, CE certificate, electrical/hydraulic schematics) is complete. Inspection by appointment possible. We do not accept liability for the technical data provided or for possible errors.

Stanje: dober (rabljeno), Press: Year of manufacture: 2000 Gsdpfxov D A Itj Ad Aotw 380 V, 32 A 3,300 x 2,100 x 2,200 mm (LxWxH) Buffer tank: Year of manufacture: 2016 25 m³ 6,000 x 2,500 x 2,600 mm (LxWxH)