LPG viličarji

HC Hangcha CPYD35–XW22F

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 1.815 h, nosilnost: 3.500 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 1.410 mm, tip droga: triplex, gradbena višina: 2.240 mm, širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.500 mm, lastna masa: 4.995 kg, vrsta pogona: Treibgas, gradbena širina: 1.235 mm, LPG forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for use and fully operational Technical condition: very good Front tire type: Superelastic Front tire size: 8.15-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 6.50-10 Lredpot Dd Azofx Abbog Rear tire condition: 60 - 80% Description: Semi-cab with PVC side panels, lighting similar to road traffic regulations, 3rd and 4th hydraulic control valve to fork carriage, rotating beacon, manual levers, interior rear-view mirror Sideshift, fork positioner, ATIB fork positioner with sideshift, opening range: ID - ID 145-850 mm 3rd valve, 4th valve, rear work light, front work light, semi-cab, interior rear-view mirror, rotating beacon, windshield wiper, LED, seat,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed Lrjdpfx Abovwlqqsbjg - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 1.203 h, nosilnost: 3.500 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 1.410 mm, tip droga: triplex, gradbena višina: 2.240 mm, širina nosilnega okvirja vilic: 1.100 mm, dolžina vilic: 1.500 mm, lastna masa: 4.995 kg, vrsta pogona: Treibgas, gradbena širina: 1.245 mm, LPG forklift Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Lrodst Dd Abepfx Abbog Front tire size: 8.15-15 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: 60 - 80% Description: Semi-cab with PVC side panels, lighting similar to public road regulations, 3rd and 4th valve to carriage, rear work lights, beacon, hand lever controls Side shifter, fork positioner, Fork positioning with side shifter, opening range: ITA/IK 145-860 mm 3rd valve, 4th valve, rear work lights, front work lights, semi-cab, interior mirror, beacon, windscreen wiper, LED, seat,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, upogibna sila (maks.): 1.000 t, hod: 200 mm, obratovalna hitrost: 50 mm/s, hitrost vzvratne vožnje: 180 mm/s, skupna masa: 8.000 kg, skupna dolžina: 3.915 mm, skupna širina: 1.605 mm, skupna višina: 2.655 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, trajanje garancije: 24 meseci, Kot upogiba (maks.): 90 °, dolžina mize: 3.200 mm, delovna višina: 450 mm, All-električni servo upogibni stroj Nazivna sila (kN): 1000 Hod drsnika (mm): 200 Globina grla (mm): 360 X-osni pomik (mm): 600 R-osni pomik (mm): 200 Z-osni pomik (mm): 2500 Lodpfev Hchlox Abbjrg 🔹 Pametni CNC sistem – SL100-P z naprednimi algoritmi in 12-palčnim zaslonom na dotik za intuitivno upravljanje. 🔹 Visokonatančna konstrukcija – Preračunana s pomočjo metode končnih elementov (FEA), žarjena in enkratno strojno obdelana za dolgoročno stabilnost in natančnost. 🔹 4-osni inteligentni odrivnik materiala (backgauge) – Pogon z AC servomotorji, hitra pozicioniranja z avtomatskim preprečevanjem trkov. 🔹 Sistem za kompenzacijo natančnosti – Nastavljive konveksne letve in fina nastavitev za optimalno natančnost upogibanja. 🔹 Zmogljiv in vzdržljiv pogon – Visokonavorni servomotor, robustni krogelni vijaki in zaščita za dolgo življenjsko dobo. 🔹 Popolnoma zaprto povratno vodenje – Magnetno merjenje Y1/Y2, natančnost pozicioniranja ±5μm. 🔹 Optimiziran električni sistem – Zaprt električni omarica, učinkovito odvajanje toplote in urejena napeljava za zanesljivost in enostavno vzdrževanje. 🔹 Uvožene precizne komponente – Krogelni vijaki in linearna vodila zagotavljajo natančnost brez kompenzacije hoda. 🔹 Visoka natančnost, stabilnost in pametna avtomatizacija – zasnovano za profesionalno upogibanje pločevine!

Leto izdelave: 2003, obratovalne ure: 43.000 h, Stanje: potreben popravila (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Ljdpfxokcgyns Abberg Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Hardox bodemvloerplaat uitsluitend Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze pers kan tevens volledig gereviseerd worden verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Hierbij geldt een garantie van 2 jaar. Neem contact met ons op voor meer informatie of een vrijblijvende offerte. Algemene principes van revisie Reiniging & demontage Voordat de revisie daadwerkelijk plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten nagemeten en waar nodig opnieuw gelast. Dit geldt in elk geval voor de volgende onderdelen: • Aanpersplaat (ram) • Frame • Kanaal • Voorpersklep Na demontage en inspectie wordt de ram opgelegd en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden waar nodig uitgedeukt en gerepareerd. Overspuiten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen & slangen worden vervangen. De hydraulische componenten worden voorzien van nieuwe pakkingen. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en waar nodig vervangen. Alle aansluitdozen worden vervangen en gemonteerd op goed toegankelijke locaties. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw verpakt en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast: De schakelkast wordt gecontroleerd en gereinigd. Waar nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieninterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Stanje: dober (rabljeno), Leto izdelave: 2003, Dobro stanje, aktivna orodja, merilna roka. Deli, ki so prikazani v roki, niso vključeni. Lrsdpfx Abewybg Ssbsg Tehnični podatki so prikazani na slikah.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, Ljdetvau Aspfx Abborg • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. Lodotvat Tjpfx Abborg The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Ledsv T I Evepfx Abbsrg Your Service Team, Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), obratovalne ure: 2.658 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 71 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.620 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 600 kg, vhodni tok: 200 A, kapaciteta rezervoarja za olje: 1.250 l, lastna masa: 29.000 kg, Technical Data - Baler: Manufacturer: BOA Recycling Systems B.V. Model: Impress M75-45-A-5-1.6 Ecoline Year of Manufacture: 2021 Operating Hours: 2,658 hours (as of May 2024) Number of Bales Produced: 42,212 (as of May 2024) Main Pressing Force: 71.2 kN (71 t) Specific Pressing Force: 9 kg/cm² Operating Pressure: 280 bar Cylinder Stroke: 2,200 mm Feed Hopper Dimensions: 1,620 x 1,000 mm Filling Volume per Pressing Cycle: 2.4 m³ Theoretical Cycle Time: 21 seconds Theoretical Throughput Capacity: 450 m³/hour Bale Dimensions: 1,100 x 720 mm, length adjustable up to 1,400 mm Drive Power: 45 kW Total Connected Load: 100 kW Power Consumption: 200 A Tying: 5-fold vertical, fully automatic; press ram is prepared for additional 3-fold horizontal tying Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 13.6 t/hour - 60 kg/m³: approx. 24.2 t/hour - 100 kg/m³: approx. 36.4 t/hour - 150 kg/m³: approx. 54.7 t/hour Bale Weights: up to 600 kg (material-dependent) Lodpou Thcvefx Abborg Hydraulic Tank Volume: 1,250 L PLC: Siemens S7 1500 Control Panel: Siemens SIMATIC HMI TOUCH Transport Dimensions of Baler: 10,000 x 2,800 x 3,385 mm (L x W x H) Height Assembled with Feed Hopper: 4,743 mm Height Assembled with Conveyor Belt: 7,123 mm Machine Weight (Baler): 29 t Noise Level: