Tračna žaga za kovino MBS-ARG260Plus

Hans Schreiner MBS-ARG260Plus

Stanje: novo, Leto izdelave: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are paramount. This model features a swivel arm from 0 to 60°, with carbide guides for the saw blade. The frame design ensures precise and quiet operation. Machine Characteristics The horizontal band saw for metal with a pivoting arm allows for perpendicular cutting to the axis of the material or at any angle within a 0–60° range. The material can be fed manually or by any mechanical device, while tool feed is automatic. The blade guides are fitted with special carbide and bearing inserts, which greatly influence blade guidance, its service life, straightness, accuracy, and cutting quality. Carbide guiding significantly reduces wear on the machine and blade. The machine is equipped with a powerful coolant pump in a closed-loop system. The arms of the saw are made of one-piece cast iron and, combined with a 27 mm wide cutting blade, enable high-volume series cutting for both profiles and solid materials. The vise is mounted on an adjustable bed and is equipped with a quick-release clamp. The blade guides use hard metal (carbide) plates and a bearing system, ensuring high accuracy and straightness of cuts thanks to carbide guides. The base features a cast iron worktable with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting motion comes from the movement of the blade, while the arm moves down. The descending speed (cutting speed) is controlled by a hydraulic cylinder. Feed speed is regulated on the saw’s control panel. Two blade speeds are available: 37.5 and 75 m/min. Once the arm reaches the lowest position (after completing the cut), the blade drive switches off automatically. Safety is provided by the blade guards and micro-switches that stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection switches off the saw automatically in case the blade breaks. Power transmission is via a motor with a worm gear drive. The motor is equipped with a thermal protection fuse to prevent overheating during operation. Klodpfx Asudi Unjqgsw Technical Data: TOTAL POWER: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE SIZE: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VIC HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter x Profile x Square): Angle 0º: ø220 / 260 x 140 / 200 x 200 mm Angle 45º R: ø160 / 160 x 140 / 160 x 160 mm Angle 60º R: ø100 / 120 x 100 / 100 x 100 mm Price does not apply to machines purchased in Poland.

Stanje: novo, 1 brand new semi-automatic horizontal bandsaw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting capacity: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade size 2730 x 27 x 0.9 mm Klsdpfovyidmox Aqgew Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special Features: • Semi-automatic operation • Hydraulic vice, clamping via foot pedal • Double mitre cuts via swivelling frame o Material remains straight in position! o No need to turn the material for mitre cuts! o High efficiency with significant time savings! • Pre-set precise stops at 0°, 45° and 60° left and 45° right • Interchangeable work table • Hydraulic vice, laterally adjustable to left and right • Adjustable length stop, 500 mm, for repeat cuts of the same length • Arm lowering regulated steplessly by hydraulic cycle; after completing the cut, the arm returns to the starting position and the vice opens automatically • Coolant system • Swarf brush • Swivelling control panel • Electrical safety switches for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Stanje: novo, Cutting diameter: 185 mm Saw band length: 2,085 x 20 x 0.90 mm Table height: 920 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 200 kg Berg & Schmid – Metal Band Saw GBS 185 Eco AutoCut Extremely fast and smooth cutting thanks to improved drive technology - Mitre cuts up to 60° to the left Kljdpfx Aovn Uzasqgsw - Suitable for dry and wet cutting - Coolant system - Machine base

Stanje: novo, Leto izdelave: 2026, Optimum Gear-Metal Bandsaw OPTIsaw SD 200V For Demanding Sawing Applications Item number: 3300205 DESCRIPTION - Quiet operation - Robust cast construction - Steplessly adjustable bow descent via hydraulic cylinder with throttle valve Kedov Sg T Njpfx Aqgslw - Microswitch for automatic cutoff at end position - Clearly legible scale for angle adjustment - Supplied as standard with high-quality bimetal saw blade - Saw blade tension adjustable from the front by handwheel - Ball-bearing saw blade guide - Sturdy machine base with large wheels and a convenient transport handle for easy relocation of the machine - Adjustable material stop for series cuts - Safety switch for saw blade cover - Fully equipped, allowing the user to start productive work immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1382 mm Width without material stop approx.: 434 mm Width/depth (product) approx.: 533 mm Width with material stop approx.: 533 mm Height (product) approx.: 1200 mm Height lower end position approx.: 790 mm Height upper end position approx.: 1200 mm Net weight approx.: 130 kg Worktable height: 530 mm Electrical Data Drive motor power: 0.75 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 100 W Machine Data Saw blade speed: 26 – 80 m/min Saw blade length: 2360 mm Saw blade width: 19 mm Saw blade thickness: 0.9 mm Mitre angle: 0 – 45° Feed: Steplessly adjustable Raising of saw bow: Manual Cutting Capacity Cutting range 0° round (solid): 180 mm Cutting range 0° square (solid): 180 mm Cutting range 0° rectangle vertical (solid): 180 x 240 mm / 50 x 300 mm Cutting range +45° round (solid): 110 mm Cutting range +45° square (solid): 150 mm Cutting range +45° rectangle vertical (solid): 110 x 170 mm SCOPE OF DELIVERY Material stop Bimetal saw blade Machine base

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Table height: 910 mm Cutting range at 90° (flat): 245 x 150 mm Cutting range at 90° (square): 200 x 200 mm Cutting range at 45° (round): 160 mm Cutting range at 45° (square): 160 x 160 mm Cutting range at 60° (round): 100 mm Cutting range at 60° (square): 100 x 100 mm Speed range: 45/90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Total power requirement: 1.5 kW Machine weight: approx. 200 kg Required space: approx. 1430 x 720 x 1700 mm Features: Kjdpfx Aexaa Tbeqgolw - Suitable for cutting profiles, tubes, and solid materials made of iron and non-ferrous metals - Saw bow can be swiveled up to 60° for miter cuts - Stepless lowering control via hydraulic descent cylinder - Torsion-resistant, heavy-duty saw arm made of cast iron - 2-band speeds for optimal cutting results (400 V) - Robust construction for smooth and low-vibration operation - Automatic cut-off after material is fully cut - Heavy-duty cast-iron vise with quick-release mechanism - Ball-bearing saw blade guide with quick adjustment to adapt to the workpiece width ensures optimal working results Scope of delivery: - Saw blade - Workpiece stop - Base frame - Pressure gauge for blade tension - Vise with quick-release mechanism - Coolant device - Hydraulic descent cylinder - Motor protection switch - Automatic cut-off

Stanje: novo, PILOUS Double Miter Bandsaw ARG 235 plus Including special accessories: Powered chip brush, blade tension indicator Cutting capacity: Round: 90° -45° +45° +60° in mm: 235-165-185-115 Square: 90° -45° +45° +60° in mm: 230-145-160-80 Rectangle: 90° -45° +45° +60° in mm: 280 x 180-185 x 80-185 x 100-115 x 80 Main motor: 400 V, 50 Hz, 1.4 kW Coolant pump motor: 400 V, 50 Hz, 0.05 kW Blade speed: 40/80 m/min Saw blade dimensions: 2710 x 27 x 0.9 mm Working height (vice): 900 mm Coolant tank capacity: approx. 15 l Machine dimensions (min.): 1640 x 750 x 1400 mm Kodpfxjilqh Ej Aqgjlw Machine dimensions (max.): 1930 x 1610 x 2000 mm Machine weight: 295 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 1,1 kW (1,50 KM), vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna višina: 1.700 mm, skupna dolžina: 1.400 mm, skupna širina: 685 mm, skupna masa: 200 kg, Razpon rezanja okroglega jekla pri 45°: 145 mm, Obseg rezanja okroglega jekla pri 90°: 225 mm, Obseg rezanja kvadratnega jekla pri 45°: 150 mm, Območje rezanja kvadratnega jekla pri 90°: 190 mm, dolžina tračnega lista: 2.480 mm, širina tračne žage: 27 mm, Sawmill Band --- 2480 x 27 x 0.9 mm Sawing Speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting Capacity 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting Capacity 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting Capacity 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDES * Adjustable material clamp * Angle scale up to 60° * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure regulation Klodpfsga Tzqex Aqgew * CE emergency stop * Coolant pump * Base cabinet * Quick-release vise * M42 bi-metal saw band

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg CNC Press Brake 3200 mm x 200 t Standard equipment: ----- Robust construction CNC axes Y1, Y2, X, and R CNC crowning device motorized with CNC control Original DELEM DA 58 T 15" touchscreen CNC control Backgauge with linear guide and ball screw, 4 stop fingers 2 sheet support arms Laser safety device on upper beam Kjdotvhxmopfx Aqgjlw Quick clamping system for upper tooling Upper tool system: Promecam Amada segmented and gooseneck Multi-V die system compatible with both Promecam and Amada systems CE-certified safety equipment

Stanje: kot nova (razstavni stroj), Exhibition machine – The best-selling bandsaw model in this category. This model is generally used in metalworking shops, machine workshops, and assembly operations. Easy mitre adjustment from 90° to 60° to the right. The bandsaw can be equipped with two types of drives. High cutting precision and long bandsaw blade life are ensured by three-sided carbide blade guidance in guide blocks and robust bearing of all rotating components. The bandsaw comes equipped with a 1730x13×0.65 mm bandsaw blade. Supplied with base frame and cooling system. The cooling system is integrated in the base frame. Kedpfxovrvuio Aqgelw Technical data: Motor output up to: 0.55 kW, 230V Wheel diameter: 180 mm Bandsaw blade dimensions: 1730 x 13 x 0.65 mm Mitre range: up to 45° left, and 60° right Cutting capacity at 90°: 180 mm x 100 mm Ø 130 mm Cutting capacity at 45°: 115 mm x 75 mm Ø 115 mm Cutting speed: 75 m/min Weight: 103 kg Sample image Subject to price changes, errors, misprints and typographical errors excepted.

Stanje: novo, Leto izdelave: 2024, Hydraulic Press Brake PBO-3212-CNC Delem DA-58T Technical Specifications - Nominal Pressure: 1250 kN - Maximum Bending Length: 3200 mm - Throat Depth (Distance Between Tool and Back Frame): 320 mm - Maximum Ram Stroke: 120 mm - Maximum Open Height: 390 mm - Distance Between Uprights: 2600 mm - Maximum Back Gauge Travel: 600 mm - Motor Power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Tooling - Front Sheet Supports: 2 pcs - Back Gauge Positioning (X-axis): Servo drive - Ram Positioning (Y-axis): Servo drive Kljdogi Dkyepfx Aqgsw - Manual Adjustment of Back Gauge Fingers (R-axis) - Punch Clamping System: AMADA-type quick-change Delem DA-58T Control - Advanced operator support based on algorithms - Advanced graphical simulation of bending processes - Operator guidance - Algorithms for production process optimization - Automatic crowning Manual Crowning (optional*) This feature ensures the operator can always maintain a consistent bending angle across the entire sheet length. Automatic Crowning (optional*) Allows the control system to automatically monitor and adjust crowning to ensure optimal settings at all times. OCS The oil cooling system ensures stable machine parameters even during prolonged continuous operation. Professional Support We maintain ongoing communication with our customers. Upon purchasing a machine, we provide a support package for expert assistance by Otinus technicians. Visit and Test Our Machines Take part in an exclusive demonstration where a qualified Otinus technician will showcase the machine’s full functionality. You are welcome to bring technical drawings and sample material. Scope of Delivery: A two-day operator training and commissioning - Day 1 (up to 8 hours) – Commissioning and control system training. - Day 2 (up to 8 hours) – Independent machine operation under supervision; programming of specific details is possible. Telephone consultation with a specialist - Available Mon-Sat, 7:30 am to 9:00 pm – an 8-hour package to be used within 12 months. Free rental of transport rollers and two jacks for easier machine setup at the customer’s premises. Rollers and jacks will be delivered upon prior request (at least 7 days before delivery). Terms of Cooperation - 24-month warranty period. - Delivery time: approx. 6-8 weeks. Applies except when the machine is marked as in stock. - Machine is brand new - Warranty and post-warranty service by the seller - The customer is responsible for the machine during unloading and transport on their premises.