Tračna žaga - vodoravna

GERD WOLFF KMY 2DG 350

Stanje: novo, Working range approx. 360 mm Working range, quadrant: 360 x 360 mm Working range, bundles (W x H): 180–280 x 50–160 mm Cutting speed: 20–100 m/min (stepless adjustment) Saw blade dimensions: 4,420 mm x 34 mm x 1.1 mm Nodpfeqrqvhjx Af Hjdd Saw blade tension: hydraulic Multiple feed: 500 mm Drive power: 3.7 kW Machine dimensions (L x W): 2,500 x 2,200 mm Machine weight: 2,300 kg Standard equipment - Hydraulically controlled full-stroke double vice clamping system - Drive via IE3 motor with frequency inverter (PMSM, equivalent to IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Display of feed speed on HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC-board control for all electrical and hydraulic functions - Floating pendulum vice - Split front vice - Stepless speed control via inverter - Hydraulic blade tensioning - Roller bearings with hydraulically controlled carbide blade guiding system - Automatic workpiece height adjustment by quick-start sensor - Preset cut counter with auto shut-off - Bundle cutting nesting device (hold-down clamp) - Power-driven blade cleaning brush - Saw blade monitoring for standstill and blade breakage - Washing hose for machine cleaning - Work lamp - Roller table, 2 m length - One M42 bimetal saw blade - One set of tools and toolbox

Stanje: novo, Leto izdelave: 2024, SEMI-AUTOMATIC DRILLING SYSTEM “UNIBOHRFIX 50” With the UniBohrFix 50 drilling system, all types of profiles can be processed either against a stop or using the gripper. Drilling is carried out manually via a lever, while materials are automatically positioned to the next drilling point along the X-axis. You can easily process entire programs or use the stop plate for fast single-hole drilling. The system is suitable for workpieces up to 100 kg. The system also includes a minimum-quantity spray unit with holder and spray can. Technical data for the standard version can be found in the table. On request, all components of the system can be customized to your requirements. You can choose from different drilling machines, roller conveyors, positioning systems, and clamping vices. Plantec configures the system to perfectly meet your needs! BENEFITS - A series of holes is drilled automatically at precise intervals. - Operator errors are drastically reduced. - Programming is completed within minutes. - Excellent price-performance ratio. - Considerable reduction in manpower requirements. Standard measurement lengths: 3,000 mm 6,000 mm Drilling machine: Unimax 2 T Spindle: MK2 Continuous drilling capacity: 18 mm Speed ranges: 100-2000 rpm, 200-4000 rpm Throat depth: 225 mm Spindle-table distance: 60-400 mm Adjustable clamping vice with digital linear readout Positioning length stop: PD-100e Control system for automatic positioning Positioning: Absolute or incremental (chain dimension) Easy-to-read LED display Carriage with DC servomotor Positioning accuracy: +/- 0.1 mm/m Stop arm with spring damping Stop plate with groove Memory control with 3,000 storage places Roller conveyors: RD-200/3 Load capacity: 200 kg/m Roller width: 290 mm Roller diameter: 40 / 50 mm Insert plates Nodpfx Ajgwt Slef Hedd Bracing for stability Control cabinet Available options: - Minimum-quantity spray system with spray head and holder - Gripper for clamping material to the stop plate

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Sir or Madam, Nodopy Eldspfx Af Hjdd For sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly notable for its ease of operation. This newer model from 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out, among others: - Spindle bearings in the milling head replaced - Repainted - Various standard parts such as handles, oil sight glasses, switches, etc. replaced - Worn parts such as drive belts replaced - Way covers partially replaced - Gib strips adjusted - And much more... Delivery time: immediate Year of manufacture: 1989 Machine No.: 2102-xxxx Table: rigid angle table Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features & accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts, if necessary, are replaced in advance - Upon request, we can completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 21.500 h, Funkcionalnost: popolnoma funkcionalen, Tsugami BO205E-III including Iemca Smart 320 bar feeder Convertible from long to short turning High-pressure pump with 4 controllable valves Fire extinguishing system Nodpfx Aswdru Ijf Hodd - Immediately available -

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Centre distance: 4000 mm Faceplate diameter: 800 mm Control system: Siemens 810D Spindle speed: 1 - 1600 rpm / 2-step Spindle torque: 6000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 size 11) Operating hours / On-time: to be read out h Tailstock quill taper: ISO MK 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centres: 5,000 kg Max. workpiece weight unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total installed power: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH) approx.: 2.6 x 9.1 x 2.5 m Cycle lathe with Siemens cycle control Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gear ranges Nodpfju Ix Izjx Af Hedd Range II: spindle torque 258.9 to 1,364.6 Nm Range I: spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electric cabinet Parat quick change toolholder Coolant system Incl. various accessories (see photos), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) Ndodpfx Asfgyicjf Hjd * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Ndedpfx Ajh S Nxpjf Hed Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Ndodpfxod N H A Nj Af Hed Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Cutting capacity at 90°: Round material: 260 mm, Flat material: 300 mm / 260 mm, Saw blade length: 4640 mm, Saw blade width: 34 mm, Saw blade thickness: 1.1 mm, Blade speed: 140 m/min, Motor power: 4 kW, Machine dimensions (LxWxH): approx. 2500 mm / 2300 mm / 1500 mm, Weight: approx. 1500 kg. Including roller conveyor system. Documentation available. An on-site inspection is possible. Njdpov Np Uqofx Af Hsdd

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material Njdpfofg E Hlsx Af Hsdd 6. Open vice