Stacionarni odsesovalni sistem m3/h

Holzing RLA 400 VIBER Power 11300 m3/h

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Iedpjcqvhwsfx Adkoap Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Iedpfegtm U Aex Adkoap Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Leto izdelave: 1977, stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivelling heads. Drilling heads included on both sides at the front. Iajdpfx Aded N Rb Dekjp Very good condition. Available immediately.

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h Iodpfx Ajd H Rf Tjdkeap • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA Ijdpfsh Hvk Aex Adkoap - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Leto izdelave: 1990, stanje: dober (rabljeno), Used side loader Kalmar, The machine has been well maintained. Isdpjh Et E Nofx Adkjap For further details, please refer to the pictures.

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base Isdpfx Aded N H A Nskoap - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Leto izdelave: 2022, stanje: novo, angle: 0° - 90° maximum cutting length: 1,370 mm Isdpfx Adei Ezr Nokoap

Stanje: rabljeno, Skupna višina 6500 mm, tloris 2000 x 2000 mm, postavitev na prostem. Kompaktna filtrirna serija, model PKFP – 1 element – 1,92 x 1,92. Filtrirni sistem z stresanjem, nadtlakovno delovanje. Dolžina filtrirne vreče 2500 mm, premer 180 mm, filtrirna površina 105 m². 2 ventilatorja za surovi zrak, 2 cevi (premer 300 mm). 1 x ventilator KT 300, moč 15 kW, zmogljivost 6361 m³/h, letnik 1999. 1 x ventilator S 25 / 300, moč 7,5 kW, zmogljivost 7400 m³/h, letnik 1993. 1 x transportni ventilator 6,1 kW, zmogljivost 57 m³/min, letnik 1996. Skupen volumenski pretok cca 14.000 m³/h. Briketirni stroj Höcker Polytechnik tip BrikStar C 3 - 12.1225, motor 3,0 kW, premer briket 65 mm okrogle, kapaciteta cca 40-45 kg/h, odvisno od specifične teže materiala. Lokacija skladišča: Nattheim. Iasdpfxjvviytj Adkop

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit Iajdpfxjt Hxxps Adksp The machine is equipped with NC cutter control and a pneumatic package. - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min The machine is well-maintained and in very good condition.