PREMER 100 MM HITRO REZALNA KROŽNA ŽAGA

GELİŞİM GLS - 100

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Gbsdpfjfg E Hpjx Afqog Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: dober (rabljeno), Leto izdelave: 2019, Stroj ima 1500 ur vretena DMG Mori CLX 350 V 4, Leto izdelave 2019, Gedpfoxy Hyzjx Afqsbg Krmilje DMG Mori Slim Line / Siemens Shoptrun, Pomik X/Z 185/540 mm, Pomik Y osi 80 mm, Revolver z 12 orodji, Pogonska orodja, C-os, Merjenje orodij Tooleye, Trivpenjalna glava KNCS 225/66, Vpenjalni tulec, Držalo VDI 30, Visokotlačno hlajenje 12 bar, Kontra konica, Transporter ostružkov, Pripravljeno za podajalec palic.

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Godpfxsd N H A Ns Afqsbg Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: novo, Leto izdelave: 2025, dolžina tračnega lista: 3.920 mm, širina tračne žage: 34 mm, Double Column Fully Automatic Bandsaw Everising H-260 HB Cutting range round: 0 - 260 mm Cutting range square: 300 x 260 mm Bundle clamping width: 145 – 190 mm Bundle clamping height: 30 – 130 mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1 mm Weight: 1759 kg Machine dimensions: 2170 x 2100 mm The standard equipment of the machines is as follows: - Sturdy steel construction with double-column design - NC feed system - Infinitely variable, frequency-controlled cutting speed (inverter-controlled) - Digital cutting speed display - Hydraulically operated double horizontal vices - Hydraulic saw blade tensioning - Saw blade guides (including back guide) made of carbide - Hydraulically pre-tensioned blade guides - Precision PLC control system for all hydraulic and electrical components - Cut counter with automatic shut-off - Automatic out-of-stock shut-off - Multi-job function - Bundle clamping device - Powered chip brush - Automatic blade breakage control incl. emergency shut-off - Chip flushing pistol - Flexible work lamp - 2-metre roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction Gsdsq Ulxyjpfx Afqobg - Cut deviation monitoring Extensive and complete German documentation.

Leto izdelave: 2013, Stanje: rabljeno, Cutting diameter: 420 mm Bandsaw blade dimensions: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw motor: 7.5 kW Bar material diameter: 420 x 3000 mm Bar material diameter: 300 x 6000 mm Total power requirement: 30 kW Machine weight: approx. 18.5 t Space required: approx. 12.5 x 5.0 x 2.5 m Godpfx Aod Izmaefqebg CNC sawing system with JAESPA Compact 4S band saw, equipped with round steel magazine and discharge gripper for sawing round bars from 50 to 420 mm. Includes 6 storage compartments with a maximum bar weight per compartment of 3,400 kg. Cut lengths: 20 – 1,000 mm. Like-new condition, approx. 1,000 working hours.

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: BEHRINGER Model: HBP 530 A Year of manufacture: 2001 Specifications Metric Capacity at 90°: 530 x 530 mm Gedpfx Asu U Narsfqjbg Min. cutting length: 40 mm Max. cutting length: 17 - 110 mm Power: 12 kW Chip conveyor: Yes Dimensions (approx.): Length: 4000 mm Width: 2250 mm Height: 3270 mm Weight: 4400 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are to be inferred. We recommend verifying all key details.

Stanje: rabljeno,

Stanje: rabljeno, Leto izdelave: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D Shop Turn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 Driven tools: 12 BMT 65 Speed of driven tools: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box integrated in the door - Signal lamp - 2 + 2 driven tool holders Gedpfx Aeww Nazsfqobg - Various static tool holders - Flat guides - Tool measurement arm - Programmable tailstock - 23 bar coolant supply - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual pressure clamping

Stanje: rabljeno, Leto izdelave: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotary movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 - 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Gbedpstv H Ucefx Afqog Total power consumption: 35 KVA Machine weight: approx. 10 t Required floor space: approx. 4.5 x 2.8 x 2.5 m The machine was fully overhauled by the manufacturer in 1994, including a new electrical cabinet, new Bosch and Heidenhain servo drives, and TNC 360 (3D control) from Heidenhain. Planing slide Ø 600 mm Traverse path: 150 mm The machine is currently not operational due to an electrical fault.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Nosilec orodja: VDI 30 Revolverska glava za orodja: 12 pozicij Gsdpfx Afex Nnbhsqebg Hitrost glavnega vretena: 5.000 vrt/min Pogonska moč: 16,5 kW Vključno s podajalcem palic Vključno z dokumentacijo