Krožna žaga KALTENBACH KMR 100 AP HM

Kaltenbach KMR 100 AP

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Gjdpfefrvzvjx Afqebg Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 33.000 h,

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. Gedpfofg E Hpsx Afqebg - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: dober (rabljeno), Leto izdelave: 2014, 900 mm premer vrtenja, 650 mm maksimalni obdelovalni premer, 992 mm maksimalna dolžina struženja, vreteno do 1000 min⁻¹, premer izvrtine vretena 275 mm, revolver z 10 postajami, vretenski motor 45 kW, krmilje FANUC Series 32i, Gbedpfx Afowwtrbjqog močanske vpenjalne glave s 3 čeljustmi, konjiček, transporter za odrezke, hladilna naprava,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, CNC Double Spindle Turning Center Control: CNC Path Control incl. 19" TFT Siemens Sinumerik 840 D sl Solution Line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel distances: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter spindle slide: 180 mm Z3 – Counter spindle slide: 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0-4000 rpm Bar capacity: 102 mm Drawtube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0-5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Maximum power (100/40% duty cycle): 10.9/14.2 kW Maximum torque (100/40% duty cycle): 26/34 Nm Speed range: 40 – 10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 Gbedpfswcd S Nox Afqjg VDI toolholder diameter (DIN 69880): 40 mm Maximum power (100/40% duty cycle): 10.9/14.2 kW Maximum torque (100/40% duty cycle): 26/34 Nm Speed range: 40 – 10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool axis resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES - Short bar loader magazine IRCO ILS-RBK 100/16 - Various main spindle reducing tubes - NC-controlled workpiece pick-up device for both main and counter spindle The system consists of NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws - Conveyor belt for removal of workpieces from the machine - Coolant system 8/20 bar with immersion cooler - Chip conveyor - Oil mist extraction unit - Control cabinet cooling unit (up to 40°C) - Counter spindle slide - Easy-Tool Monitor - 1 collet chuck for quick-change collet size 100 for main spindle - 1 collet chuck for quick-change collet size 100, Nova Axis Fix for counter spindle - Approx. 40 various quick-change collets size 100 (full inventory) - Tool change device, pneumatic, ø 100 mm - Approx. 50 various tool holders, fixed and driven (full inventory) - Mounting elements - Documentation

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 26.920 h, IRB 6640-235/2.55 Year of manufacture: 2011 We are also happy to offer this robot fully refurbished! For further information, please do not hesitate to contact us! Gbodeim Si Ajpfx Afqog

Stanje: novo, Saw blade diameter: 370 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 100 mm Cutting range at 90°: rectangle 180x100 mm Working height: 925 mm Saw blade speed: 17 – 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirements approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic (20195) Gsdpsd Iin Esfx Afqebg · Mitre cutting: left 60° & right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large gear ratio, integrated in a robust cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, additionally with lateral quick-shift for mitre changes · Precision prismatic guideway for gearbox head, laterally adjustable · Particularly robust base frame with built-in cooling system · Large chip drawer · Chip removal brush integrated in the saw blade cover CNC Control: · With control panel for more than 90 different sawing programs with 99 sub-programs for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of saw frame and clamping fixtures · Preselection of 3 different material feed rates · Visualization of the complete work process with simple data input ATTENTION: Price does not include saw blade! (Saw blade price: €204)

Stanje: rabljeno, Article: Clamping heads Brand: Various manufacturers For multi-spindle automatic lathes, used or new Please contact us for further information and pictures via email (at) or Gbsdpfx Ajn H Nzujfqog *

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration isolation Gsdpfxjdz Er Rs Afqobg Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2025. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and application support. Delivery available with factory service or via forwarding agent, worldwide. Online or on-site demonstrations with customer parts on request, application consulting by accredited Profitech measurement laboratories during the project phase. Complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and instructional programs available, including online courses. Rental, leasing, or financing possible directly through Profitech, no financial institution required. Measuring device can be individually configured to meet customer requirements. • Measuring range per individual sensor: 200x200x200mm • Dimensions: 900x750x950mm • Weight: approx. 170 kg • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 analysis software (12 months free software updates) Manufacturer's sample image (sister device)

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm - Square: 300 x 300 mm - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm Gsdpfxoq Evn Ej Afqjbg - Weight (approx.): 1000 kg