GEA Procomac Opera, Robopac paletizator in ovijalec (2009)

GEA Procomac Palettierer & Wickler

Stanje: rabljeno, Glass bottle filling line for hot filling of smoothies. Consisting of the following components: - Unpacking table - Bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type "VW 24/1") - Flash pasteurizer Lrsdpfowgc R Eex Acwjt - Pressure tank - Capper (Marchesini, type "ML667") - Cap sorter - Tunnel cooler - Blower - Cap inspection (BBull CIS) - Labeller (Anker, 1999, type "Roland 10/4") - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler Machine (additional): Hot filling, with pasteurization Capacity: 5,000 bottles/h Formats: 0.25-litre bottles, twist-off caps Equipment: Unpacking table, rinser, vacuum filler, flash pasteurizer, pressure tank, capper, cap sorter, tunnel cooler, cap blower, cap inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler.

Stanje: rabljeno, Leto izdelave: 1992, Avtomatski stroj za pihanje PET steklenic Proizvajalec: SIDEL Lredpfjwa Rhrox Acwot Tip: SBO 4 S1 Leto izdelave: 1992 Zmogljivost: 4.000 za steklenice 1,5 L / 2 L Vgrajena moč: 150 kW V kompletu kalupi za 1,5 L Podajalnik preform Tehnično stanje: rabljena naprava, zažene se, program deluje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13-13, Stroj za pihanje BLOMAX 4 model 13-13. Stroj je brez napak in deluje v odličnem stanju s popolno funkcionalnostjo. Napajanje: 400 V / 150 A / 60.000 W Lredpfx Acjt Akgwewet Leto izdelave: 2000

Stanje: rabljeno, Leto izdelave: 1998, Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Ljdpsutni Refx Acwjrt Capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Included in the set: - 1.5 L bottle molds - Preform feeder - Chiller unit Technical condition: The machine is used and was fully operational until disassembly. Currently, the machine is dismantled, packed in components, and prepared for transport. Comes with comprehensive and original technical documentation.

Stanje: rabljeno, številka stroja/vozila: LC600, Technical Specifications and Performance Data This used bottling line is configured for highly efficient beverage production in 0.5L PET bottles. Optimised for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletising. The configuration is non-combi and features a separate blow moulder upstream of the filling monoblock, ideal for flexible maintenance and line balancing. Production speed: 25,000 bph Bottle formats: Compatible with 0.5L bottles Containers: Designed for handling PET bottles Configuration: Non-combi (separate blow moulding and filling systems) Main components and years of manufacture: - Sidel Universal SBO 14 blow moulder (2007) - Sarcmi 70-10 ISO filling monoblock (1988 – fully overhauled 2025) - Sarcmi labeller (2011) - Zambelli shrink wrapper (2004) - Handle applicator (2004) - ACMI double-head palletiser (1992) Advanced Automation and Control Systems The line benefits from a modernised conveyor and control system, with conveyor management and electrical control cabinets upgraded in 2010–2011. This update improves module synchronisation, enhances safety interlocks, and ensures stable high-speed performance across blowing, filling monoblock, labelling, and packaging stages. - Upgraded conveyor control and electrical panels in 2010–2011 - Integrated safety interlocks for secure, high-throughput operation - Non-combi architecture simplifies maintenance and phased upgrades Line Integration Capabilities Designed as a complete production solution for water bottling, this used line offers seamless integration from blow moulding to end-of-line palletising. The non-combi layout allows independent operation and optimisation of the blow moulder and filling monoblock, making format changes and maintenance manageable without stopping the entire line. Inline flow: Blow moulder → Filling monoblock → Labelling → Shrink wrapping → Handle application → Palletising Conveyor system upgraded for reliable accumulation and product transfer Suitable for carbonated and still water in PET Machine Condition and Maintenance History This used bottling line has benefited from targeted upgrades of the conveyor management and electrical control cabinets, completed in 2010–2011. A key highlight is the Sarcmi 70-10 ISO filling monoblock, originally built in 1988 but fully overhauled in 2025 to ensure maximum operational reliability. The line is sold in operational condition as a ready-to-use industrial packaging solution. Lrjdpfx Acoyk E Srswst - Sarcmi 70-10 ISO filling monoblock: Overhauled in 2025 - Conveyor and electrical control cabinets upgraded: 2010–2011 - Well-known OEM components throughout the line - Operational with existing 0.5L PET format

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 47.000 h, številka stroja/vozila: LC582, Used complete Krones PET bottling line – 22,000 BPH – Overview Lrodpjyhbmtefx Acwjt This used, ultra-clean Krones PET bottling line is a complete, highly efficient solution for beverage production and industrial packaging in the fields of cider, carbonated mineral water, still water, and CO2-infused juices. Manufactured by Krones and GEA in 2010 and maintained in operation with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L). It combines a Contiform S12M stretch blow molder, directly coupled with an ultra-clean isobaric filler-capper block. This is a market-ready used bottling line designed for reliability, hygiene, and rapid PET format changeovers. Technical Specifications & Performance Data Manufacturer: Krones and GEA Year of manufacture: 2010 Operating hours: approx. 47,000 Nominal output: 22,000 bph (0.5 L) | 18,000 bph (1.5 L) Processed products: cider, carbonated mineral water, still water, juices with CO2 Filling technology: Ultra-clean, isobaric, volumetric PET bottling Current product: apple juice with water and CO2 Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck Controls: Siemens Simatic S7 PLC platform Main Scope (CIP): Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/h Process: GEA TDS unit with flash pasteurizer, mixer, carbonator, deaerator, and process tanks Preforms: Preform tipper and infeed conveyor; Krones Contifeed RS preform feeding system; Prejet linear preform cleaning unit Closures: Cassner cap feeder with cap rinsing and sterilization Stretch blow molder: Krones Contiform S12M, directly linked to the ultra-clean block (no air conveyor) Filler/capper block: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler block cleaning Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L fill level control; Krones Checkmat 731 EM label inspection Conveying and inspection: SYNCO bottle conveyor; Krones Flowliner bottle leak tester Labeller: Krones Contiroll OPP 720-15, dual roll-fed wraparound labelling with hotmelt Secondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S pack conveyor; Twin Pack carry handle applicator Pack coding: Leisinger Jet 3 ink coder Palletizing: Krones Robopox Modulpal (2016) Advanced Automation & Control Systems Line control & PLC Siemens Simatic S7 series PLC for coordinated line control, interlocks, and diagnostics Integrated

Stanje: rabljeno, Leto izdelave: 2002, Pregled Ta linija za polnjenje PET je bila med letoma 2002 in 2013 izdelana pri nemškem proizvajalcu Krones in je zasnovana za polnjenje negazirane in gazirane vode v PET-steklenice z vratom tipa Alaska. Linija bo v proizvodnji do septembra 2025, ogled med obratovanjem je mogoč po predhodnem dogovoru. Tehnične podrobnosti - Zmogljivost: 22.000 steklenic/uro (nazivna hitrost pri 0,5 l je 25.000 steklenic/uro) - 60 šob za izpiranje - 80 polnilnih ventilov - 15 zapiralnih glav - Izdelek: voda - Material posode: PET - Tip vratu: Alaska - Vrsta etikete: OPP - Znamka zapiralca: Zalkin - Leto izdelave: 2002, 2009, 2013 Obseg dobave - Kompresor: Atlas Copco ZD2300VSD (2009) Ledpfx Aowqpgzecwsrt - Stroji za pihanje: Krones Contiform S14 (2009) - Zračni transporter: Eurosistemi (2002) - Polnilni stroj: Krones Volumetic, Variojet (2002) - Etiketirka: Krones Contiroll (2013)

Stanje: rabljeno, Leto izdelave: 2010, Pregled Ta linija za polnjenje PET-steklenic je bila med letoma 1996 in 2019 proizvedena pri več evropskih proizvajalcih. Linija je zasnovana za gazirane pijače, kot so osvežilne pijače, in je primerna tudi za vodo z ali brez CO₂. Z zmogljivostjo 14.000 steklenic na uro ponuja celovito rešitev, od pihanja steklenic do paletiranja. Ta linija je v dobrem stanju in je še vedno popolnoma delujoča. Tehnični podatki - Zmogljivost: 14.000 steklenic na uro - Izdelek za polnjenje: gazirana voda in brezalkoholne pijače - Vrste embalaže: krčljiva folija brez pladnja - Paleta: evro paleta (1.200 x 800 mm) - Stanje: dobro tehnično stanje, še vedno v uporabi Obseg dobave Pihalni stroj | Sidel | SBO10 | 2010 Napajalnik preoblik | Sidel | 2010 Zračni transporter | Sidel-Alsim | 1999 Enota za izpiranje/polnjenje/zapiranje | Sidel-Alsim | 48/60/10 | 1999 Mešalnik | Sidel-Alsim | 1999 Lsdpfxeyb Tuio Acwsrt Sušilnik steklenic | ACI | 2015 Stroj za pakiranje s krčljivo folijo | Acmi | 2019 Aplikator za ročaj | SMI-Pack | 2002 Transportni sistem za steklenice in pladnje | Sidel-Alsim | 1999 Paletirni stroj | Alsim | 1996 Stroj za ovijanje palet | PM Pragometal #1 | 2009 Stroj za ovijanje palet | PM Pragometal #2 | 2009

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 34.656 h, Funkcionalnost: popolnoma funkcionalen, moč: 250 kW (339,91 KM), volumenski pretok: 2.694 m³/h, tlak (maks.): 10 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, hladilni sušilnik, Second hand Atlas Copco GA250VSD Year of manufacture: 2018, with approximately 34,656 operating hours. Lsdew Ewd Rjpfx Acwort 10 bar pressure with 44.90 m³/min flow rate 250 kW

Stanje: rabljeno, številka stroja/vozila: LC426, Used KRONES bottling line for glass bottles up to 20,000 bph (bottles per hour) Introduction to the KRONES bottling line The used KRONES bottling line for glass bottles is in high demand in industrial settings thanks to its reliability and efficiency. Comprising a series of premium components, the complete KRONES bottling line ensures smooth operation and effectively meets the rigorous demands of high-volume production. Main Components At the forefront is the KRONES K-131-669 filling monoblock, built in 2016, which forms the core of the entire line. With an impressive output of 20,000 bottles per hour, it is complemented by the KRONES 472-072 depalletizer from 1998 and the Gronemeyer RINSER 8983-400-4 from 2000. This setup enables smooth and continuous workflows from bottle unloading through to the filling process in the complete KRONES bottling line. Quality Control of the Used KRONES Bottling Line Ensuring product quality is a top priority in any bottling facility. Accordingly, the KRONES CHECKMAT inspector from 1999 plays a key role within the line. Equipped with advanced features for both fill level control and meticulous label inspection, it ensures that every product meets required standards. Additionally, the ACI TA20 2 AE bottle dryer from 2000 guarantees bottles are impeccably prepared for subsequent labelling and packaging stages while effectively eliminating moisture-related issues. Labelling and Packaging Efficient labelling and packaging are essential parts of the KRONES bottling line. The KRONES STARTMATIC K-080-669 from 1999 performs exceptionally in these areas, delivering precise label application and the capability to print directly onto glass bottles, thereby streamlining workflows and enhancing brand presentation for glass bottles up to 20,000 bph. This is further supported by the SMI SMI/7507 case packer from 1999 and the FRANPACK Type 121971214 pallet wrapper from 1997, both ensuring products are safely packaged and ready for shipment. Operational Condition and Specifications The KRONES bottling line is in excellent operating condition and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the system promises to boost operational efficiency while maintaining product quality. It is specifically designed for glass containers and mainly geared towards beer production, ensuring precise and consistent fills which result in superior product quality and customer satisfaction. Lodpfxsvgvwmj Acwort In summary, the KRONES bottling line represents a solid investment for companies seeking to optimize their filling processes. With robust construction, state-of-the-art features, and proven performance, it is ready to deliver outstanding results and take production standards to the next level.