5+uni štiristranski skobeljni stroj 230x170 mm

Futura Paoloni Group P-MAX 23/5+UNIV

Stanje: novo, Typ: R-RP1300 Caedpfsdflqaex Afqja Arbeitsbreite: 1300 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe (Dicke): 3–200 mm Vorschubgeschwindigkeit: 0–30 m/min Gesamtmotorleistung: 30,37 kW Motorleistung erste Einheit: 15 kW Motorleistung zweite Einheit: 11 kW Staubreinigungsbürste: 0,37 kW Vorschubmotor: 4 kW Hubmotor: 0,37 kW Walzendurchmesser erste Einheit: 240 mm Walzendurchmesser zweite Einheit: 210 mm Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck (Luft): 0,6 MPa Absaugleistung: 9.600 m³/h Transportabmessungen: 2.700 x 2.100 x 2.400 mm Gewicht: 3.300 kg

Stanje: novo, Leto izdelave: 2023, številka stroja/vozila: A2306/9210, The pneumatic drawer and frame press, model Box V3.0, enables the easy and fast assembly of drawers and frames. Thanks to its functional design, both individual workpieces and complete boxes with a wide variety of joints can be optimally pressed. This ensures a perfect joint and form of drawers and frames. The special pressing process also prevents folding joints and fronts with glass inlays from becoming deformed. Maximum pressing force: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops to accommodate protruding drawer fronts during pressing Slow approach of the movable pressing unit to the workpiece Cjdpegqfnzofx Afqoaa Operation of the press via joystick Optional equipment: - Digital positioning display - Kit Door (for frontal pressing of furniture corners) Advantages: - High flexibility: Variable pressing force and compatibility with various drawer and frame dimensions - Minimal setup times enable high output - Intuitive operation - High operating safety through CE safety standards, e.g. two-hand operation - Plug & Play

Leto izdelave: 1983, Stanje: generalkompletno obnovljen (rabljeno), Stroj za filetiranje in odstranjevanje kože Baader 185, namenjen belim ribam, je primeren za velike in srednje velike polake, trske, osliče, gråsej ipd. Kapaciteta znaša 24–32 rib na minuto. Leto izdelave: 1983. Dimenzije: 690 x 185 cm, višina 180 cm. Cedpfx Afoifpz Ieqsaa

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Caodpjvvkfdjfx Afqja Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.

Leto izdelave: 2020, Stanje: generalkompletno obnovljen (rabljeno), Dear customers! Our experience has shown that communication by email often unnecessarily prolongs the process. We would like to assist you quickly, and for this, a three-minute phone call is more effective than exchanging emails for three days. TSWc 30.20 Dry Spray Booth Dimensions: 3000 x 2000 mm (W x H) + Fan mounted at the top Air capacity: 10,800 m³/h Motor: 2.20 kW ex-protected Exhaust duct: 500 mm diameter Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat with clamping rail (+180 EUR net) Options/additional price for: Paintstop filter mat with clamping rail: 180 EUR net Side deflector plates with hinge: 590 EUR net Images may differ. Csdpfx Afefn Nddoqeaa We are also happy to offer you complete spray booths with supply air systems, heat exchangers, supply air ceilings, ductwork, etc. Just contact us.

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Cedpfxjd Rzc Re Afqoaa Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, I am selling a combined machine: sliding table panel saw with scorer + spindle moulder Manufacturer: FELDER Austria Model: KF700S Year of manufacture: 2011 Cutting length: 3200 mm Cajdpfor Alzpox Afqea Saw blade and spindle moulder tilting 0-45° manual Saw blade and spindle moulder height adjustment digital Digital display for parallel fence and working height Main and scoring saw blade activation from aluminum sliding table. Main motor panel saw: 3.0 kW / (adjustable 3200/4500/5800 rpm) Scoring motor panel saw: 0.75 kW Main motor spindle moulder: 5.5 kW Tools, options, and accessories as shown in the pictures are included in the price. Very good condition. Immediately available. Including full documentation and CE certificate.

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0540/98, Proizvodna številka: 0540/98. Leto izdelave: 1998. Kapaciteta: 400 ton. Dolžina hoda: 300 mm. Število hodov: 10–40 / min. Nastavitev drsnika: 300 mm. Vgradna višina: 700 mm. Dimenzije mize: 1600 x 1300 mm. Neto teža: 45 ton. Odprtina portala: 1600 mm. Zunanje dimenzije: 2 x 3 x 6 metrov. Cajdjicbbzspfx Afqoa Krmilni sistem: MEAB. Podajalnik / ravnalnik traku: iRON RNE 50B / 11. Odvijalec: iRON SA6000, maks. 700 mm.

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Caodpfsnl Nqqox Afqja Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Stanje: novo, Leto izdelave: 2025, Construction size: 4 Nominal heat output: 116 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with chamotte Suitable for rooms up to: 2,900 m³ (according to DIN) Fuel types: firewood, chipboard, wood chips, briquetted wood shavings Fuel consumption: 30 - 35 kg/h Blower air output, free blowing: 7,500 m³/h Outlet opening: Ø 600 mm Flue gas connection Ø 220 mm Weight: 1,550 kg Cajdpfjdlhcdex Afqea PLC control cabinet: 380 Volt