Formatna žaga

Format4 Kappa 400 X-Motion

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Stroj se prodaja po naročilu stranke. Formatna miza, dolžine 3200 mm, z visokokakovostnim X-sistemom za premikanje. Električno nastavljiva višina reza, maksimalna višina reza 133 mm. Električna nastavitev naklona 90° - 45°. Moč motorja 7,35 kW (10 KM). 3 nastavitve hitrosti žage: 3500/4500/5500 vrt/min. Upravljanje preko zaslona na dotik X-Motion. Nledpfxjzp Nw Ij Anpof Elektronsko pozicioniranje: višina žage, nastavitev naklona, vzporedni vodnik. Baza podatkov za orodja in avtomatski programi za rezanje. Programi za utore, vrste utorov, utori, poševni rezi. Predrezalni agregat, 2-osni, nastavitev višine/širine. Podaljšek 1250 x 650 mm z digitalnim prikazovalnikom kota. Opora, dolžine 3200 mm, vrtljiva 90° - 45°. Sistem hitre zamenjave Quick-Lock za glavno žago.

Stanje: rabljeno, Leto izdelave: 2020, Delovna širina: 510 mm Strojalna glava: Silent Power Dolžina ravnalne mize: 2250 mm Kot nastavljivega opornega vodila: da, od 45° do 90° Maksimalna debelina obdelovanca pri striganju: 250 mm Njdpozq Db Rofx Anpslf Nastavitev višine mize za striganje: električna Kazalnik debeline striganja: digitalni prikaz Hitrost podajanja: 4–16 m/min, brezstopenjska Podajalni valj: jeklo Odvodni valj: jeklo Povezani pritiskni nosilec Moč motorja: 7 kW Motorna zavora: da, avtomatska Priključek za odsesavanje: 150 mm Dolžina stroja: 2200 mm Širina stroja: 1050 mm Teža: 900 kg

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel Nlsdpfx Ajv Erkasnpof T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Nlodorigxyspfx Anpsf Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Nlodpfx Ajdqzcxsnpjf Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: Nledpfxjv Aacfo Anpsf - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Stanje: dober (rabljeno), Leto izdelave: 2019, Pretočni CNC stroj FELDER GROUP FORMAT4 CREATOR 950 (letnik 2019) z vstavljanjem lepila in moznikov, 12 kW HSK-F63 rezkalnim agregatom, integrirano Ø 120 mm žago, mozničarsko enoto in hitrimi pomiki do 90 m/min predstavlja kompaktno rešitev za natančno rezkanje, vrtanje in formatiranje lesa. Ključne tehnične prednosti - Zavzame le 5 m² prostora Idealno za delavnice z omejenim prostorom. - Enostavno vpenjanje in programiranje Hitro in intuitivno delo tudi za manj izkušene uporabnike. - Kompakten, zmogljiv in hiter Odličen za manjše delavnice, ki želijo profesionalne rezultate. Napredne funkcije - Agregat za vstavljanje lepila in moznikov - Rezkalni agregat 12 kW (do 24.000 obr./min) - Samodejno merjenje dolžine obdelovanca - Avtomatska menjava orodja (linijsko skladišče za orodja s 4 pozicijami) - Vrtanje z vseh petih strani - Izdelava utorov z integrirano žagico - Obdelava z vseh štirih strani obdelovanca - Obdelava vratnih kril Pogonska enota - Vpetje: HSK F63 - Število osi: 3 Pomiki - Pomik X osi: 3000 mm - Pomik Y osi: 950 mm - Pomik Z osi: 80 mm Orodja - Največja teža orodja: 7,5 kg Nljdpfx Aewyvgasnpjf Miza - Nosilnost mize: 130 kg Dodatna oprema - Paket za servisno pomoč preko interneta - Avtomatsko centralno mazanje CENA NE VKLJUČUJE DDV

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor Nljdpfx Anjw Dv Hzjpsf - WoodWOP 6.1

Stanje: novo, Leto izdelave: 2024, Table length 2000 mm Table width 1000 mm Lifting height 400 - 1010 mm Load capacity 300 kg Machine weight approx. 220 kg Description: - Sturdy support frame for worktops Nodpfjv Htkdex Anpjlf - Easy, back-friendly operation thanks to height adjustment via foot pedal - Optimum maneuverability with 4 swivel castors – 2 with locking brakes - Beech multiplex board 2,000 x 1,000 x 30 mm - 5-year warranty

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg Nsdpfx Asqu N U Dsnpjlf 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar