čelna plošča stružnice

Forkardt Ø 610 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Hjdpfxsmhhypj Agusnk Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Hjdpetwb U Asfx Aguonk Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.

Stanje: novo, Table diameter: 330 mm Table load capacity: 350 kg Swivel range: 135 degrees Tilt adjustment: manual / machine: manual Max. rotation speed: 5 rpm, stepless Vertical table load capacity: 120 kg Total power requirement: 0.125 kW Machine weight: approx. 52 kg Required space: approx. 640 x 490 x 630 mm Welding positioner with: - Foot switch - Manually tiltable and swivellable Hnedjh D Svgopfx Aguok - Steplessly adjustable speed - 250 ampere welding current transmission - Borehole in faceplate: 40 mm.

Stanje: novo, Bernardo Workshop Press WK 20 FH Pro Technical Specifications Pressing force: 20 t Piston stroke: 185 mm Table width: 170 mm Clearance (E): 510 mm Clearance (F): 130 mm Distance cylinder - table (F1): 40 mm Distance cylinder - table (F2): 965 mm Lateral cylinder travel (M): 175 mm Width (A): 730 mm Depth (B): 560 mm Height 1 (C): 1525 mm Height 2 (D): 1630 mm Weight approx.: 112 kg Hodpfx Aod Du T Rjguenk Features • Supplied as standard with left and right traversable pressure cylinder • Suitable for aligning, pressing, bending, assembling gears, discs, etc. • Standard equipment includes foot pedal and hydraulic hand pump for piston feed • Supplied with V-block for aligning shafts • Automatic piston return via integrated return spring as standard • Height-adjustable press table with locking pin • Large, easy-to-read pressure gauge • Includes two-stage hydraulic pump • Robust design thanks to welded steel frame

Stanje: dober (rabljeno), Upper support Slide width: 145 mm Height: 72 mm Bolt circle: 180 mm Hnjdedq Nvispfx Aguek Centering pin diameter: 70 mm Support surface: 240 x 220 mm Weight: 23 kg Transport dimensions: Length: 490 mm Width: 220 mm Height: 270 mm

Stanje: novo, Shelf load capacity: 20,000 kg Load capacity per level: 2,000 kg Number of load levels: 2 x 5 units Recommended material length: 6,000 mm Upright distance: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): m (please specify exact values) The most suitable solution for storing long materials using a 2-column system. Hodpfofgyg Tox Agusnk - Each compartment can be swung outward, allowing loading and unloading with an overhead crane at any time. - Double-sided design. Galvanized tray made of 2 mm steel sheet, length 4,000 mm: EUR 344 Galvanized tray made of 2 mm steel sheet, length 4,000 mm, with cut-out: EUR 387 Divider for tray, steel: EUR 54.00 Divider for arm, steel: EUR 54.00 Divider for tray, stainless steel: EUR 69.00 Divider for arm, stainless steel: EUR 69.00

Stanje: zelo dobro (rabljeno), Technical Data for Order Picking Rack: Rack System: Dexion Type: HI280 Technical Data for Installation: Number of rack rows: 01 pc. Rack length: approx. 1,340 mm Number of bays / rack row: 01 pc. at 1,290 mm Number of levels incl. ground level: 06 pcs. Note: The advantage of a packing table or an order picking rack is that all the required tools and accessories necessary for assembling the product are always within easy reach. Scope of delivery includes: 02x shelf uprights, used Material color: Sendzimir galvanized Frame profile dimension: 50 x 55 mm Adjustable pitch: 25 mm incl. horizontal and diagonal braces Weight / pc.: approx. 5.50 kg Uprights are pre-assembled 1,200 mm high 610 mm deep 06x shelf panels, used Material color: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pc.: approx. 4.37 kg Max. load per shelf with evenly distributed weight: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 06x shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight / pc.: approx. 0.84 kg Material color: Sendzimir galvanized 48x picking bins, used Manufacturer: SSI Schäfer Box designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Hsdpfx Asn Smvheguenk Weight / pc.: approx. 0.785 kg 01x load sign with specifications for bay and shelf load, manufacturer, and order number Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damages, corrosion or similar defects may be present. General information about the item: This item is offered for collection only. If additional transport or shipping of this item is required, extra costs will be incurred, which can be requested from us depending on the delivery location and scope.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 9.000 mm, vrsta nastavitve višine: električni, hitrost brusilnega traku: 25 mm/s, skupna višina: 2.200 mm, skupna dolžina: 4.640 mm, skupna širina: 2.650 mm, skupna masa: 1.200 kg, dolžina brušenja: 2.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 4.640 mm, potrebna širina: 2.650 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinder M2S92-150 with two sanding belts for manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Not for use with aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Sanding unit with contact roller, manually shiftable from belt 1 to belt 2 Hnedpfxev S Sr Ro Aguok - Electric table elevation - Flat machine table - Workpiece stop ruler on the machine table - Initial set of sanding belts - CE-compliant design - Operating manual + manufacturer's declaration according to Annex 2 The robust, welded steel frame construction provides exceptionally smooth machine operation. Both machine stands feature offsets that enable processing of longer workpieces. The three-roller belt guidance offers the operator the largest possible open work area, allowing comfortable handling especially with hand sanding blocks. Belt drive is provided by a three-phase motor and balanced drive roller. Each belt is individually adjustable via separate pneumatic tensioners, allowing optimal belt tensioning force per belt. The dust extraction system is dimensioned to effectively capture sanding dust and direct it to the extraction nozzle when attached to a suitable extraction unit. The sanding unit is mounted on play-free roller guides, ensuring low-fatigue operation. The machine table height is easily and quickly adjustable via the electric motor-driven table lift. The table lift guide components are maintenance-free. For loading, the table can be extended so that workpieces do not need to be inserted under the sanding belt. Main control elements are ergonomically positioned in the center of the machine for ease of operation. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in 'Light Grey' The standard configuration is supplied with two initial sanding belts (W x L) 150 x 9000 mm and a contact roller approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted at the table center beneath the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device features four vacuum suction pads for holding workpieces and includes: the mounting with rotary axis (with brake disc mounted on the rear). At the front of the rotary axis is the swiveling unit, lockable at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disc on the swivel head enables fine adjustment of the workpiece to the sanding belt. Rotation and swivel axes are pneumatically released via foot switch, with manual rotation of the axis. Maximum workpiece weight when used as a flat table with the insert frame = 80 daN; with handling device on the clamping plate = 25 daN or 120 Nm in relation to the rotary axis center.

Stanje: rabljeno, External diameter: 500 mm Hedeb Nzi Dopfx Agujnk Bore: 95 mm Flange width: 103 mm Mount, short taper: size 6

Stanje: zelo dobro (rabljeno), skupna višina: 2.075 mm, dolžina tračnega lista: 4.650 mm, širina tračne žage: 35 mm, Centauro CO 600 Premer valja: 600 mm Višina reza: 360 mm Širina reza: 580 mm Dimenzije mize: 810 x 580 mm Dolžina tračnega lista: 4650/4550 mm Obrati na minuto: 715 Dimenzije (D x Š x V): 1165 x 760 x 2075 mm Moč motorja: 2,2 kW Stanje: kot novo Hnjdpfou Uictsx Aguek Leto izdelave: 2012