Formatna žaga

Felder Format4 kappa 550

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, This FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a panel circular saw with a blade diameter of 250–550 mm and a cutting height of 202 mm at 90° and 140 mm at 45°. The machine supports three spindle speeds: 3000, 4000, and 5000 revolutions per minute, with a cutting width of 1250 mm and a sliding table stroke of 2800 mm. It is equipped with an e-motion control system and a telescopic crosscut fence for cuts up to 3200 mm. Please contact us for further information. • Saw blade diameter: 250–550 mm • Cutting height: 202 mm (90°), 140 mm (45°) • Saw blade speeds: 3000 / 4000 / 5000 rpm • Cutting width: 1250 mm • Cutting length (sliding table stroke): 2800 mm • Control: Kappa 550 e-motion • Cantilevered table support surface: 1250 x 650 mm • Telescopic crosscut fence for mitre cuts up to 3200 mm • Swivel range of the crosscut fence: 90° to 45° • Rear table extension behind the saw axis: 1200 mm • Parallel fence: positioned electronically via ball screw, enclosed and dustproof in the table Ledpfx Asx D Exqjl Neaa

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (with clamps: 55 mm) Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow ground tooth Saw blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting stop from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction ports: 1 x 100 mm, 1 x 120 mm Ledpew I U D Ejfx Al Njaa Features: - ADVANCE clamping system consisting of: 2 pneumatic clamping tongs, motor-driven along vertical axes on a recirculating ball screw from top to bottom. The tongs handle panels up to a maximum weight of 150 kg. - Torsion-resistant, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slatted frame - Fine-adjustable folding stop with stop extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting stop - Manual programming rail with 5 T-slot stones - Pneumatic plunging of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 central support elements, pneumatically folding out - Pneumatic saw head lock - Control panel with document holder - Switch unit on saw carriage: start button, stop button - Tool cabinet - Scale lighting for vertical cuts Partnership Edition features: - Digital display for the folding stop - Digital display for the saw unit, with incremental function - Pneumatically swiveling saw unit - Scoring system with controlled counter-air nozzle, numeric display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Dolžina vozička 3800 mm Predrezilo Lodpfx Ajymwy Tel Noaa Električna nastavitev višine in kota žage ter predrezila Električna sprememba položaja desnega prislona Digitalna upravljalna plošča na dotik Miza opremljena z dodatnimi stikali za žago Maksimalni premer lista 550 mm Skupna moč 7,35 kW Leto izdelave 2014 Napajanje 380V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 443 h, Format 4 Panel Saw Kappa 550 e-motion - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scoring unit operational indicator - Cross-cut fence 3200 mm, swivels 90°–45°, with two stop jaws - Extension table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, squaring shoe - Position-controlled rip fence with digital readout at the operator panel, cutting width 1250 mm - Overhead guard: hood for 90° cuts and hood for mitre cuts, height adjustable and can be swung out of the working area - e-motion control, 15" color touch screen, operator panel at eye level. USB interface and network-ready, adjustable and can be moved out of the working area Lsdpfx Alow Tfahe Njaa - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and tilt adjustment 0°–46° - Table extension up to 1200 mm behind the saw axle, powder-coated steel - Weight: 1300 kg - Scoring unit operational indicator - Total operating hours: 443.47 h - Includes many as-new saw blades and grooving saw blade Price ex works Transport available at extra cost!

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h Laodpjv Aacfofx Al Noa TECHNICAL DETAILS MUST BE VERIFIED

Stanje: zelo dobro (rabljeno), Formatna žaga Felder kappa 550, format 4 Voziček 320 cm, Nagib in dvig/spust žaginega lista motorizirano nastavljiva, Vodilna letev na desni strani motorizirano nastavljiva do 1600 mm, Glavni motor 7,35 kW, Ljdpfox Swzvex Al Noaa Maksimalni premer lista 500 mm Rabljeni stroj, v zelo dobrem stanju.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Lasdpfx Ajqu N U Del Noa Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Connection: 220V, compressed air connection: 6 bar, weight approx. 110 kg, mobile, dowel feed via vibratory bowl feeder, automatic dowel length and diameter control, fully automatic electronic control system, functions: blowing, gluing, gluing & driving in, selector switch for glue/water for rinsing, glue residual quantity indicator, stainless steel glue tank, stainless steel water tank, 1x gun for dowel diameter 8 mm, length 20-50 mm, operating manual. Lsdpfswrruqex Al Nsaa

Stanje: rabljeno, Leto izdelave: 1995, Rabljeni stroj Leto izdelave: 1995 Ledpfsw Rhlhox Al Nsaa Oprema in tehnični podatki: - Naprava za vbijanje moznika za hkratno lepljenje in vbijanje moznika - Dovajanje moznika prek brezvzdrževalnih vibracijskih podajalnikov - Popolnoma avtomatsko brezvzdrževalno elektronsko krmiljenje s preklopnikom IZPIRANJE/LEPLJENJE/LEPLJENJE-VBIJANJE - Popolnoma zaprt lepilni sistem - 1 nerjavni rezervoar 5 l za lepilo in 1 nerjavni rezervoar 5 l za vodo - Lahka, priročna in brez povratnega udarca pištola za moznike 8 mm - Kapaciteta: 45 moznikov na minuto - Električni priključek: 220 V, 1 faza, 50 Hz - Priključek za stisnjen zrak: 6 bar - Dimenzije: 650 x 650 x 1100 mm - Teža: 110 kg Razpoložljivost: kratkoročno Lokacija: Röllbach

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Laodpfxexwz I Ie Al Nea Equipment and technical data: - Belt dimensions: 2600 × 200 mm - Work table: 935 × 460 mm - Auxiliary table at belt tensioning roller: 350 × 350 mm (with contour sanding attachment) - Sanding spindle with rubber drums, supplied with sanding sleeves Ø 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanical with separate, maintenance-free oscillation motor - Table height adjustment by handwheel, additionally adjustable to the sanding belt (forward and backward) - Sanding unit tiltable from -10° to 90°, tilting via handwheel with digital tilt display - Precise angle accuracy due to mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller power feed and veneer sanding attachment - Quick changeover from veneer to solid wood sanding - Height-adjustable idle disc table with adapter for dust extraction, for sanding at the belt tensioning roller - Large, mitre stop with stepless angle adjustment and movable ruler - Extraction: adapters for both sides Ø 100 mm (idle disc table, right and left extraction hood) - 2 sockets 400 V on the machine frame (for machine and power feed unit) - Torsion-resistant, heavy-duty steel frame for high running smoothness and stability - Large work table with sliding surface - Recess in machine frame for pallet truck – facilitates in-plant transport Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: short-term Location: Röllbach