Vrtalni in rezkalni stroj

Fehlmann Picomax 54

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, High-Precision Drilling and Milling Machine Fehlmann Model Picomax 54 Heidenhain TNC 310 Very good condition Technical Data: >> Year of manufacture: 2001 >> Travel X/Y/Z: 500 / 250 / 160 mm >> Travel W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table - spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 Fpjdoukf Ncepfx Aplsg >> Stepless speed range: 9200 rpm >> Drive power: 5 kW >> Space requirement (W x D x H): 1850 x 2550 x 2400 mm About the machine: Offered here is a high-precision drilling and milling machine Fehlmann Model Picomax 54 in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. The program setup is particularly simple thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-friendly contouring controls that allow you to program conventional milling and drilling operations directly on the machine using the easy-to-understand plain text dialog. The machine runs very smoothly even at maximum spindle speeds. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power at our site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0–527 mm Fodpowkrp Ejfx Apljpg Quick-change system: SF 32 Spindle motor: 2.9 kW Infinitely variable speed range: 50–6300 rpm Clamping surface: 320 x 670 mm Dimensions and weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight: approx. 850 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, High-precision drilling and milling machine Fehlmann model Picomax 54, Heidenhain TNC 310 Very good condition Technical Data: >> Year of manufacture: 2000, Machine No. 14000258 >> Travel X/Y/Z: 500 / 250 / 160 mm >> Travel W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table – spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system: SF 32 >> Infinitely variable speed range: 9200 rpm >> Drive power: 5 kW >> Space requirements (W x D x H): 1850 x 2550 x 2400 mm Fpodpfx Ajyu Snzepljg Accessories: >> Tool holders >> Heidenhain probe 't>> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. Equipped with a Heidenhain TNC 310 path control. The user-friendly Heidenhain plain-language dialog makes program creation especially easy. HEIDENHAIN TNCs are workshop-oriented path controls that allow you to program conventional milling and drilling operations directly at the machine in easy-to-understand plain text. Even at maximum spindle speeds, the machine runs very quietly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 160 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 250 mm, pomik po osi Z: 480 mm, največja hitrost vretena: 9.000 obr/min, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 1 m/min, hitrost vretena (min.): 100 obr/min, poteza s peresom: 160 mm, širina mize: 320 mm, dolžina mize: 880 mm, X-500, Y-250, Z- spindle stroke 160, W- machine head travel 480, table 880 x 320, max. 320 kg, SK 32 spindle taper, 100-9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124 control. Extensive accessories included. Fjdpfx Apjq R Rb Holspg

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Fjdpfx Aet N Anteplopg Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: zelo dobro (rabljeno), Control: Heidenhain TNC 310 equipped with indexing head Travel paths X/Y/Z: 500/250/160 mm W axis travel: 480 mm Clamping surface (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Fpodpfx Aowkrn Iepleg Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool – quick-change system: SF 32 Stepless speed range: 9,200 rpm Drive power: 5 kW Space requirements (W x D x H): 1850 x 2550 x 2400 mm

Stanje: zelo dobro (rabljeno), HEIDENHAIN TNC-310 Travel paths: 500 x 260 x 480 mm (+ quill 160 mm) Cross-table: 880 x 320 mm Equipped with manual handwheels Spindle speeds: 100–9,000 rpm Fpodpfxjfrbtde Aplog Various accessories MARCELS MASCHINEN CH

Stanje: rabljeno, Leto izdelave: 2022, Technical details: Cutting diameter: 128 mm Saw band length: 1640 x 13 mm Saw band width: 0.64 mm Cutting range at 90° (round): 128 mm Cutting range at 90° (flat): 100 x 150 mm Cutting range at 45° (round): 90 mm Cutting range at 45° (square): 90 x 75 mm Band speed: 24 - 35 - 55 m/min Electrical connection: 220 V / Hz Total power requirement: 500 W Approx. machine weight: 80 kg Approx. machine dimensions (LxWxH): 0.95 x 0.52 x 1.1 m The machine is unused—as new—in its original packaging. The bandsaw is manually operated. Fsdju Nig Rjpfx Aplepg Suitable for steel, cast iron, and non-ferrous metals. Workpiece clamping with vise jaws operated by handwheel; one fixed jaw and one movable jaw; clamping range 165 mm, swivel range 60°. Adjustable length stop up to max. 85 mm (i.d.).

Stanje: novo, Belt width: 100 mm Belt length: 915 mm Grinding wheel dimensions: 200 mm Fedjupxqwspfx Aplopg Work table: 170x125 / 265x150 mm Total power requirement: 0.5 kW Machine weight: approx. 26 kg Space requirement: approx. 0.6 x 0.5 x 0.3 m

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: Fodpjlb I Dajfx Aplepg - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment