Polpriklopnik z nizko nakladalno ploščadjoFAYMONVILLE
MAX Trailer MAX510 Tiefbett 3x12 t PA
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLE
MAX Trailer MAX510 Tiefbett 3x12 t PA
Stanje
Novo
Lokacija
Essen 

Prikaži slike
Prikaži karto
Podatki o stroju
Cena in lokacija
- Lokacija prodajalca:
- Heegstraße 6-8, 45356 Essen, Nemčija
Klic
Tehnične podrobnosti
- Skupna masa:
- 66.000 kg
- Največja dovoljena obremenitev:
- 48.010 kg
- Konfiguracija osi:
- 3 osi
- Oprema:
- ABS
Podrobnosti ponudbe
- ID ponudbe:
- A19966350
- Št. reference:
- 36905
- Nazadnje posodobljeno:
- dne 10.09.2025
Opis
You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Extract from the equipment. Full equipment details available upon request.
Gooseneck:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long
* Gooseneck hydraulically liftable/lowerable and detachable
* For tractor units: 6x4 or 8x4
Lowbed:
* Lowbed with external beams, extendable version, SUPER LOW design, approx. 7,550 mm long
* Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
* Supply lines are protected within the extendable beams and automatically adjust to the lowbed’s length
* 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN)
* 6 pairs of threaded blocks on the inner beams for mounting screw-in RUD rings
Rear undercarriage:
* Rear undercarriage with closed outer frame, checker plate covering and continuous prism-shaped excavator trough, approx. 1,450/900 x 505 mm, open at the rear
* 2 pairs of lashing rings foldable outwards (approx. LC 10,000 daN)
* 1 pair of lashing rings flat in the trough (approx. LC 10,000 daN)
* 2 pairs of lashing rings flat in the trough (approx. LC 16,000 daN)
* 2 pairs of stanchion pockets for approx. 100 x 50 mm plug-in stanchions in the outer frame
PENDULUM AXLE:
* PENDULUM AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle leveling cylinder with automatic reset function
* Hydraulic cylinder with shut-off valves and pre-locks for securing in raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Axle tools
Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer at our discretion
* Load index (146/146F)
Braking system:
* Wabco brake system per EU regulations with EBS-E (2S2M), without connection lines to the tractor unit
Fpedpfxoxbmprs Ah Den
Paintwork:
* Entire steel structure automatically blasted after welding using shot-blast equipment
* Second round of blasting with corundum for optimum coating system adhesion
* HRM-metallization of the complete chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL
Including the following accessories:
* Preparation for installation of bolt-on container positions for 1x 20' or 1x 40' container on the outer beams
* Without container locks
* 3.5 inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Remote control steering from front and rear by cable remote with pushbuttons, with single-track monitoring of the axles (without installation in the tractor unit)
* Electro-hydraulic unit
* On the gooseneck: plug-in aluminium sideboards and rear board, approx. 2,000 x 400 mm (L x H)
* Rear galvanized plug-in stanchions are removable (body length approx. 2,120 mm)
* Hydraulic connections from gooseneck to lowbed with multi-coupler instead of screw couplings. No guarantee on seals
* Separate air connection with air gun on the gooseneck
* 7 pairs of stanchion pockets for approx. 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
* One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
* 2 pairs of screw-in lashing rings M20 (LC 5,000 daN)
* 2 pairs of screw-in RUD rings VLBG-4 M24 (LC 8,000 daN)
* Foldable extensions, approx. 230 mm per side with hardwood extension boards. Maximal load on an area of approx. 200 x 200 mm.
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Extract from the equipment. Full equipment details available upon request.
Gooseneck:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long
* Gooseneck hydraulically liftable/lowerable and detachable
* For tractor units: 6x4 or 8x4
Lowbed:
* Lowbed with external beams, extendable version, SUPER LOW design, approx. 7,550 mm long
* Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
* Supply lines are protected within the extendable beams and automatically adjust to the lowbed’s length
* 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN)
* 6 pairs of threaded blocks on the inner beams for mounting screw-in RUD rings
Rear undercarriage:
* Rear undercarriage with closed outer frame, checker plate covering and continuous prism-shaped excavator trough, approx. 1,450/900 x 505 mm, open at the rear
* 2 pairs of lashing rings foldable outwards (approx. LC 10,000 daN)
* 1 pair of lashing rings flat in the trough (approx. LC 10,000 daN)
* 2 pairs of lashing rings flat in the trough (approx. LC 16,000 daN)
* 2 pairs of stanchion pockets for approx. 100 x 50 mm plug-in stanchions in the outer frame
PENDULUM AXLE:
* PENDULUM AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle leveling cylinder with automatic reset function
* Hydraulic cylinder with shut-off valves and pre-locks for securing in raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Axle tools
Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer at our discretion
* Load index (146/146F)
Braking system:
* Wabco brake system per EU regulations with EBS-E (2S2M), without connection lines to the tractor unit
Fpedpfxoxbmprs Ah Den
Paintwork:
* Entire steel structure automatically blasted after welding using shot-blast equipment
* Second round of blasting with corundum for optimum coating system adhesion
* HRM-metallization of the complete chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection
* Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL
Including the following accessories:
* Preparation for installation of bolt-on container positions for 1x 20' or 1x 40' container on the outer beams
* Without container locks
* 3.5 inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Remote control steering from front and rear by cable remote with pushbuttons, with single-track monitoring of the axles (without installation in the tractor unit)
* Electro-hydraulic unit
* On the gooseneck: plug-in aluminium sideboards and rear board, approx. 2,000 x 400 mm (L x H)
* Rear galvanized plug-in stanchions are removable (body length approx. 2,120 mm)
* Hydraulic connections from gooseneck to lowbed with multi-coupler instead of screw couplings. No guarantee on seals
* Separate air connection with air gun on the gooseneck
* 7 pairs of stanchion pockets for approx. 100 x 50 mm plug-in stanchions in the outer frame of the loading platform
* One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
* 2 pairs of screw-in lashing rings M20 (LC 5,000 daN)
* 2 pairs of screw-in RUD rings VLBG-4 M24 (LC 8,000 daN)
* Foldable extensions, approx. 230 mm per side with hardwood extension boards. Maximal load on an area of approx. 200 x 200 mm.
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2003
Pošlji zahtevo
Telefon & Faks
+49 201 8... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
mali oglas

835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX510 Tiefbett 3x12 t PA
FAYMONVILLEMAX Trailer MAX510 Tiefbett 3x12 t PA
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake