Stroj za razigljevanje s ščetkami

EWU Rotomat 180

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, z nerjavno krtačo za vsestransko odstranjevanje robov na profilih Itodpfxjx Dm Sls Ah Aer

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Ijdpeunt Eyjfx Ah Ajtr Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirement approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, with documentation, on-site inspection possible. Itjdeqzkdmopfx Ah Aer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 400 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, poteza s peresom: 60 mm, skupna višina: 2.100 mm, skupna širina: 2.100 mm, skupna dolžina: 2.300 mm, širina mize: 450 mm, dolžina mize: 750 mm, največja hitrost vrtenja: 4.500 obr/min, vrtljajska hitrost (min.): 1 obr/min, skupna masa: 1.900 kg, teža obdelovanca (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping system, coolant system, splash guard, tool holders, electronic handwheel, operating manual Iodpfx Aewb Erzsh Aotr

Leto izdelave: 1978, Stanje: rabljeno, številka stroja/vozila: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Iodpobx Eliefx Ah Aetr Space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (approx. 1/3 loss of power at 380 V), 0.6 kW accordingly

Stanje: zelo dobro (rabljeno), IMM 72780 Double-Sided Polishing Machine Like-new condition, the machine has hardly been used. Iodpfx Ahsu Hanys Ajtr TECHNICAL DATA Polishing wheel: 100 – 500 mm Shafts: 35 mm Spindle speeds: 1500 rpm Voltage: 400 V, 50 Hz Base machine weight: approx. 400 kg No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend. Itsdpfx Aefxyhfoh Aor

Stanje: dober (rabljeno), Leto izdelave: 1988, dolžina brušenja: 1.000 mm, širina brušenja: 550 mm, višina brušenja: 400 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Availability: immediately Iedpfx Ahsu Rqyne Aotr Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electric straight dressing device with compensation Vertical digital readout Mount for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW, 1435 rpm Adjustment wedges Coolant system with universal paper band filter Complete documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Ijdofcw Apjpfx Ah Astr Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: rabljeno, Leto izdelave: 2000, Grinding length: 800 mm Centre height: 150 mm Control system: FANUC Grinding wheel dimensions (max.): 400 x 63 x 127 mm Workpiece weight: 120 kg Itedpeu Hag Nsfx Ah Aor Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45° / -15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swivelling range: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed speed: 0 – 7.5 m/min Machine weight: approx. 4.0 t Space requirements (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters