Rezkalni stroj

KUNZMANN WF 4/3

Stanje: rabljeno, Leto izdelave: 1995, - Heidenhain digital position display - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic tool clamping system Njdovhfqrspfx Ab Tsli - Rigid angular table - Electrical central lubrication system - Coolant system - Workplace lighting - Machine feet - Year of manufacture: 1995 Specifications Milling Table: - Clamping surface: 650 x 350 mm - T-slots: 5 - T-slot width: 14 H7 mm - T-slot spacing: 63 mm - Max. load: 250 kg Working Area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Distances: - Table top to horizontal spindle centre: 140 – 540 mm - Table top to bottom edge of vertical head max.: 430 mm Milling Spindle: - Tool holder: SK40 - Speeds vertical/horizontal: 40 – 2550 rpm - Gear stages: 2 - Quill stroke vertical: 60 mm - Vertical head swivel range (both sides): 90° Feeds: - Longitudinal & cross feed: 0 – 1000 mm/min - Longitudinal & cross rapid traverse: 4000 mm/min - Vertical feed: 0 – 1000 mm/min - Vertical rapid traverse: 3000 mm/min General Data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3, Heidenhain Digital Readout, Year 1994 – Excellent Condition! Technical Specifications: • Year of manufacture: 1994 • Rigid angular table • Spindle speed range: 40 – 2550 rpm • Infinitely variable feed in X, Y, Z axes: 0 – 2000 mm/min • Travels (X/Y/Z): 400/320/400 mm • Rapid traverse in all axes • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic drawbar system • Weight: approx. 1500 kg Equipment and Accessories: • 3-axis Heidenhain digital readout • Centralized electric lubrication • Machine leveling feet • Handwheels Nsdevyr R Njpfx Ab Tjli • Coolant unit About the Machine: For sale is a Kunzmann WF4/3 universal milling machine in excellent condition. The machine comes from a government entity and was only lightly used. Switching from vertical to horizontal milling is quick and easy by simply swinging the vertical head aside. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our facility.

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table Nedpfxjlvyrbs Ab Toli - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition

Stanje: skoraj kot novo (rabljeno), Machine as new from laboratory X-axis travel: 400 mm Y-axis travel: 320 mm Z-axis travel: 400 mm Control system: Heidenhain TNC124 Table size: 650 x 350 mm Tool holder: SK 40 Spindle speeds: 0-4,000 rpm Nodeu Nnaiepfx Ab Tjli Quill stroke: 60 mm Vertical head swivels 90 degrees Total power requirement: 5.0 kW Machine weight: approx. 1.3 t Space required: approx. 2.00 x 2.00 x 2.00 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm • Feed: stepless in 3 axes from 0 to 2000 mm/min • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. Nedpfx Aexuppujb Tsli A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Kunzmann WF4/3 Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year 2002, Excellent Condition CE Compliant!! Technical Specifications: - Year of manufacture: 2002 - Fixed angle table - Infinitely variable speed up to 4000 rpm - Stepless feed in 3 axes from 0 to 2000 mm/min - Travel X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic tool clamping system - Weight approx. 1700 kg - Space requirement approx.: 2.3 x 2 x 2 m - Power consumption: 12 KVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system Nlsdpfow U Exyjx Ab Tei About the machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal directions. Switching from vertical to horizontal operation is very easy by simply swinging away the vertical head. The guideways are regularly lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location. Further milling machines from renowned manufacturers can be found on our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Kunzmann WF4/3 with Heidenhain TNC 320 contouring control, in excellent condition, CE-compliant, from a training workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347281 - Fixed angle table - Infinitely variable spindle speed up to 4500 rpm - Infinitely variable feed on 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min - Travel X/Y/Z: 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic drawbar system - Weight approx. 1,800 kg - Space requirements approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Nlodpfjxupd Ssx Ab Tei Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 control. This machine is in very good condition and has very few operating hours. It comes from an operation where it was used exclusively for training purposes. The control is extremely user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal positions. Switching between vertical and horizontal setup is very easy due to the tilting vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann on site under power. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 control are available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control - Excellent Condition, CE Certified, from Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347284 - Fixed angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 Nljdpoxupdljfx Ab Tsi - Hydraulic clamping system - Weight approx. 1,800 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping for vertical and horizontal operations - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, user manual for the control, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used solely for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple thanks to the folding vertical head. The guideways are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls are available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF4/3 Universal Tool Milling Machine with Heidenhain TNC 320 CNC Control, Excellent Condition, CE-Compliant from Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4500 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min Njdpsxupc Uefx Ab Tjli >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy by tilting away the vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been both mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. There are 7 pieces of Kunzmann WF4/3 milling machines with Heidenhain TNC 320 controls available. The machines are immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347285 - Fixed angle table - Speed: infinitely variable up to 4,500 rpm - Feed rate: stepless in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travels (X/Y/Z): 400 / 350 / 400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Quill stroke, vertical: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic tool clamping system - Weight approx. 1,800 kg - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Features: - Heidenhain TNC 320 CNC control system - Hydraulic clamping vertically and horizontally - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Nedpfx Asxupczeb Tsli For sale is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 CNC control system. This universal milling machine is in excellent condition with very low operating hours, previously used solely for training purposes. The control system is intuitive and user-friendly. The machine features hydraulic clamping for both vertical and horizontal setups. Conversion from vertical to horizontal operation is straightforward by swiveling away the vertical head. The guideways are regularly lubricated via the automatic central lubrication system. This Kunzmann has undergone both mechanical and electrical inspections in our facility. Take the opportunity to inspect and test the Kunzmann under power at our location. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 control are available. Machines are in stock and immediately available.