Stroj za odstrajevanje ostružkov iz pločevine

EVOTEC FabGo 300

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200 Bjdpstzfntsfx Abhjlc

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Bledpfx Abet Iklkehjc Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. Bsdpfel Dw D Eox Abhelc With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: novo, Leto izdelave: 2025, -TFON natančni sistem zaobljenja robov in površinske obdelave. - TFON sistem, zasnovan za vrhunsko površinsko obdelavo in zaobljenje robov različnih materialov in industrij, združuje napredno avtomatizacijo z možnostmi prilagodljive konfiguracije, da izpolni vaše natančne proizvodne zahteve. Kompatibilnost materialov: Primeren za obdelavo aluminija, nerjavnega in navadnega (ogljikovega) jekla. Širok razpon debelin: Učinkovito obdeluje materiale debeline od 0 do 120 mm. Vrhunska kakovost končne obdelave: Stroj je zasnovan za doseganje visoke kakovosti površin, kar izboljšuje estetiko in funkcionalnost izdelka. Industrijska vsestranskost: Idealen za uporabo v medicinski industriji, proizvodnji profesionalne kuhinjske opreme, avtomobilski industriji in pri izdelavi kovinskih dodatkov. Natančno zaobljenje robov: Nudi natančno zaobljene robove z radijem 2 mm, kar izboljšuje varnost in videz končnega izdelka. Napredna avtomatizacija: Integriran Siemensov krmilni sistem zagotavlja izjemno natančnost in zanesljivost delovanja. Neodvisne obdelovalne postaje: Omogočajo prilagodljivo in učinkovito večstopenjsko obdelavo tudi pri zahtevnih delovnih postopkih. Več možnosti širine mize: Na voljo z delovno širino 650 mm, 1000 mm ali 1300 mm, za pokritje različnih proizvodnih potreb. Prilagodljive možnosti transporterja: Izberite med vakuumskim, pol-magnetnim ali pol-vakuumskim transportnim sistemom za varen in zanesljiv transport obdelovancev. Čiščenje površine: Učinkovito odstranjuje rjo, okside in druge površinske nečistoče ter pripravlja obdelovance za nadaljnje postopke. Izboljšana varnost operaterja: Postaja za zaobljenje robov zmanjšuje tveganja za poškodbe zaradi ostrih robov. Vrhunska kakovost obdelave: Stroj je opremljen z abrazivno tehnologijo Scotch za gladko in enakomerno površinsko obdelavo. Podaljšana življenjska doba abrazivov: Pnevmatski oscilacijski sistem zagotavlja daljšo življenjsko dobo abrazivnega traku in Scotch-abraziva, ter zmanjšuje zastoje pri delu. Blsdshq A Txopfx Abhjc Konsistentno zaobljeni robovi: Šest lamelnih brusilnih kolutov zagotavlja enakomeren radij na vseh obdelovancih za visoko stopnjo ponovljivosti in kakovosti. Zasnovan za zmogljivost. Projektiran za varnost. Ustvarjen za industrijsko vsestranskost. TFON – Popolna površina, vsakokrat.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Cone bending device Mobile control panel with digital display Bodsw An Uhspfx Abhelc Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: rabljeno, Combined profile steel shear and punching machine GEKA Type HYD 80 / Hydracrop 80/A Machine no.: 9566 Year of manufacture: approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching: up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Bljdpfx Aerz Tutebhoc Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Worktable with back gauge at punching unit 550 x 380 mm - Working height at punching unit: 1100 mm - Worktable with back gauge at rectangular notcher 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 pcs. various punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Leto izdelave: 1996, Stanje: zelo dobro (rabljeno), Uporabljena, zelo čista in dobro vzdrževana hidravlična CNC upogibna stiskalnica serije Trumpf V naprodaj Bsdpfxoi Igi Se Abholc Trumpf V85, 2 metra x 85 ton – 4-osna CNC upogibna stiskalnica v dobrem stanju – video na dnu oglasa Proizvajalec: Trumpf Model: Trumabend V85 Leto izdelave: 1996 Največja pritrdilna sila: 850 kN / 85 ton Največji hod: 215 mm Čas zaviranja: 79 ms Skupno osi: 2-osi zadnjega vodila / skupno število osi 4 – y1, y2, x, r in i os Komplet vključuje: • Prost prehod (daylight): 390 mm • 2-osno zadnje vodilo • i-os – spodnja osnova se premika za uporabo dvojnega multi V brez potrebe po ročnem prestavljanju ali menjanju orodja • V celoti servisirana / Dobro ohranjena

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Bljdpfx Ajd Ixadobhsc Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Bodpfjd N H A Nsx Abhelc Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Bljdpfx Absd Ev Upehsc Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210