Stroj za odstrajevanje ostružkov iz pločevine

EVOTEC 1300SRS

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. Cgedpfx Asl Dw D Eofxsn This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: novo, Leto izdelave: 2025, -TFON natančni sistem zaobljenja robov in površinske obdelave. - TFON sistem, zasnovan za vrhunsko površinsko obdelavo in zaobljenje robov različnih materialov in industrij, združuje napredno avtomatizacijo z možnostmi prilagodljive konfiguracije, da izpolni vaše natančne proizvodne zahteve. Kompatibilnost materialov: Primeren za obdelavo aluminija, nerjavnega in navadnega (ogljikovega) jekla. Širok razpon debelin: Učinkovito obdeluje materiale debeline od 0 do 120 mm. Vrhunska kakovost končne obdelave: Stroj je zasnovan za doseganje visoke kakovosti površin, kar izboljšuje estetiko in funkcionalnost izdelka. Industrijska vsestranskost: Idealen za uporabo v medicinski industriji, proizvodnji profesionalne kuhinjske opreme, avtomobilski industriji in pri izdelavi kovinskih dodatkov. Natančno zaobljenje robov: Nudi natančno zaobljene robove z radijem 2 mm, kar izboljšuje varnost in videz končnega izdelka. Napredna avtomatizacija: Integriran Siemensov krmilni sistem zagotavlja izjemno natančnost in zanesljivost delovanja. Neodvisne obdelovalne postaje: Omogočajo prilagodljivo in učinkovito večstopenjsko obdelavo tudi pri zahtevnih delovnih postopkih. Cgjdpfx Afohq A Txsxjn Več možnosti širine mize: Na voljo z delovno širino 650 mm, 1000 mm ali 1300 mm, za pokritje različnih proizvodnih potreb. Prilagodljive možnosti transporterja: Izberite med vakuumskim, pol-magnetnim ali pol-vakuumskim transportnim sistemom za varen in zanesljiv transport obdelovancev. Čiščenje površine: Učinkovito odstranjuje rjo, okside in druge površinske nečistoče ter pripravlja obdelovance za nadaljnje postopke. Izboljšana varnost operaterja: Postaja za zaobljenje robov zmanjšuje tveganja za poškodbe zaradi ostrih robov. Vrhunska kakovost obdelave: Stroj je opremljen z abrazivno tehnologijo Scotch za gladko in enakomerno površinsko obdelavo. Podaljšana življenjska doba abrazivov: Pnevmatski oscilacijski sistem zagotavlja daljšo življenjsko dobo abrazivnega traku in Scotch-abraziva, ter zmanjšuje zastoje pri delu. Konsistentno zaobljeni robovi: Šest lamelnih brusilnih kolutov zagotavlja enakomeren radij na vseh obdelovancih za visoko stopnjo ponovljivosti in kakovosti. Zasnovan za zmogljivost. Projektiran za varnost. Ustvarjen za industrijsko vsestranskost. TFON – Popolna površina, vsakokrat.

Stanje: novo, Leto izdelave: 2025, Technical Data – English --- Rated power at 50% duty cycle: 20 kVA Short-circuit current: 11.6 kA Electrode force: 180 daN Throat depth: 455 mm Arm spacing, steplessly adjustable: 173–410 mm Electrode taper: MK1 --- Welding controller: WS 402 (4-stage, 2-program) --- Including additional options: - Foot switch - Main switch - 3m connection cable + 32A Cekon plug --- 6-month warranty --- Training & commissioning upon request --- Spot welding electrodes & spare parts available from stock Cedpfok E Hnuex Afxjgn --- Further information available on our homepage

Stanje: novo, DESCRIPTION Cedpfx Ajd Ixadsfxogn DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Leto izdelave: 2021, Delovno območje: 3000 x 1500 mm Maks. laserska moč: 4 kW (TruDisk 4001) Maks. debelina pločevine: 25/20 mm (jeklo St. 37/nerjavno) Vgrajena kamera za nadzor procesa (z monitor vmesnikom) Krmiljenje: Siemens Sinumerik 840 D SL z 18” zaslonom na dotik Samodejna regulacija hitrosti Programabilni samodejni izklop stroja Paket za rezanje bakra Paket za rezanje medenine Csdpfx Ajxr U U Refxegn Opremljen z: Samodejni menjalec palet Nabavna cena v letu 2021: 2.700.000 DKK brez DDV.

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Cgsdpfx Asd Ev Upjfxen Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC upogibni stroj za pločevino Amada. Delovna širina: 4000 mm, pritisna sila: 2200 kN, hod: 350 mm, osi: 8. Dimenzije stroja X/Y/Z: cca. 5600 mm/2650 mm/3300 mm, teža: cca. 18000 kg, krmiljenje: Amada. Ogled na lokaciji je mogoč. Cgsdpfexv A E Sox Afxsn

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Press force: 220 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Stroke: 350 mm Installation height: 600 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2555 mm Machine length: 3730 mm Machine width: 2290 mm Overall height: 3055 mm Table height: 820 mm Csdpfx Ajq D Dzljfxegn Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 11,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Ram double-guided, stable and precise - Robust backgauge, double-guided - Manually adjustable backgauge fingers, double-guided on linear rail - Movable front support arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Manual crowning - Foot pedal with emergency stop - 380 V, 50–60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T control - Fiessler AKAS 2M laser finger guard - FPSC Safety PLC (manual) - X-R axis with servomotors - CNC crowning for high bending accuracy - 2 additional backgauge fingers Other working lengths and capacities available with the appropriate accessories!

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New Cgsdpenah Taofx Afxsn The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: novo, Leto izdelave: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Working area (effective): 1520 x 3050 mm Maximum positioning speed: 120 m/min Cedpfx Afoi Ar Rujxjgn Maximum acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Maximum table load: 1500 kg