Stroj za brizganje več materialov

ENGEL ES650H/200W-200HL-2F

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and a platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideal for precision hydraulic injection molding. Contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Minimum mold height: 500 mm Rcjdpfx Aezvu U Semfjf • Opening stroke: 750 mm • Maximum daylight (distance between platens): 1,150 mm • Maximum mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Stanje: generalkompletno obnovljen (rabljeno), Na voljo gumarska testna oprema 1 x reometer Alpha Production MDR (po želji v kontejnerju s pnevmatskim vzorčevalnikom) Rjdjwmnlhepfx Amfjcf Naprava je preverjena, kalibrirana in opremljena z novo programsko opremo na novem tower računalniku!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 98.780 h, vpenjalna sila: 2.000 kN, skupna masa: 12.200 kg, proizvajalec krmilnikov: ENGEL, model krmilnika: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie bar spacing of 920 x 750 mm. The machine is equipped with two injection units, screw diameters of 40 mm and 25 mm, and rotary table control. Take advantage of this opportunity to purchase this hydraulic injection molding machine Engel ES650H/200W-200HL-2F. Contact us for more information on this machine. • Clamping unit • Mold weight (max.): 1500 kg • Moving total weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter, A-side: 110 mm • Centering ring diameter, B-side: 90 mm • Clamp system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (main) - Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle opening: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (secondary) - Type 200W Rsdsyf H Nnspfx Amfecf • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Pump motor: ~6.8 kW • Machine axis travels • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / process control: Yes • Pressure interface: Yes • Second injection cylinder: Yes • Mold monitoring: No • Internal mold pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition: • Well maintained and serviced Additional equipment • Engel linear extraction robot ERC 23/1-E (included)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljena dvo-komponentna brizgalna stiskalnica z robotom Proizvajalec: ENGEL Tip: ES650H/200W-200HL-2F Leto izdelave: 2004 Zapiralna sila: 200 ton Razmik med stebri: brezstebrna izvedba Rodpfx Ameyak A Isfocf Minimalna vgradna višina: 500 mm Odpiralna pot: 750 mm Polž DN 1: 40 mm Maks. volumen brizga: 251 cm³ Teža brizganca v PS: 216 g Polž DN 2: 25 mm Maks. volumen brizga: 69 cm³ Teža brizganca v PS: 60 g Krmiljenje: CC100 Tehnična oprema: -Robot Engel, tip: ERC23/1-E -4x izvleki jeder -Krmiljenje vrtljive mize

Stanje: rabljeno, Leto izdelave: 2008, Screw cap GL 18 Closure for medicine bottle GL18 Redpfx Aodqbzqsmfecf Injection mould with 10 cavities

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BELOW Rodpfx Asvf Iubemfocf Equipment / further details: With heating for embossing Also very interesting for the textile industry

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, For sale is an injection moulding machine from the brand Netstal, model Synergy 1000-230. After a transport accident, the control cabinet is completely defective; for this reason, the machine is being offered as a spare parts donor or for repair. The machine would otherwise be fully operational and in good condition. Technical data: Operating pressure: 210 bar Injection force: 182 kN Clamping force: 1000 kN Opening stroke: 0-400 mm Mould installation height: 450-750 mm Total weight: 7,200 kg Operating hours: approx. 53,000 Available from March 2024. Initial hydraulic oil fillings can be ordered from us. Upon request and for an additional charge, loading and transport (Europe-wide) can be organised. Redpfx Amorfbnmefocf Prices plus VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Rodpfx Amey Iwlasfjcf

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 t Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight opening: 750 mm Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Rcedpfoxvy Rlex Amfef Shot weight (PS): 141 g Injection pressure: 2,500 bar Dimensions & Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Core pull: 1 unit Additional Information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-series, distinguished by optimized hydraulic performance, stable process control, and high reliability. The machine features a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as for applications with high quality requirements. Typical advantages of this series include: * Robust and durable design * High process stability and repeat accuracy * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition additionally stands out due to its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is often used in sectors such as automotive supply, technical plastic parts, and series production.

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Rjdpfx Amsxirqqjfecf Za več informacij ali kontakt obiščite našo spletno stran,