Engel ES650H/200W-200HL-2F

Engel ES650H/200W-200HL-2F

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ Rbedsyf Htyepfx Ad Tet • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm • Max. mould dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s Rsdpfx Aew Aw Tajd Tebt - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and a platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideal for precision hydraulic injection molding. Contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Maximum daylight (distance between platens): 1,150 mm • Maximum mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 Redpfxjyfrb Nj Ad Tjbt • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljena dvo-komponentna brizgalna stiskalnica z robotom Proizvajalec: ENGEL Tip: ES650H/200W-200HL-2F Leto izdelave: 2004 Zapiralna sila: 200 ton Razmik med stebri: brezstebrna izvedba Minimalna vgradna višina: 500 mm Odpiralna pot: 750 mm Polž DN 1: 40 mm Rsdpfxjyak A Is Ad Tsbt Maks. volumen brizga: 251 cm³ Teža brizganca v PS: 216 g Polž DN 2: 25 mm Maks. volumen brizga: 69 cm³ Teža brizganca v PS: 60 g Krmiljenje: CC100 Tehnična oprema: -Robot Engel, tip: ERC23/1-E -4x izvleki jeder -Krmiljenje vrtljive mize

Leto izdelave: 1988, Stanje: rabljeno, številka stroja/vozila: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Rodpfxjz N Amj Ad Tebt Cut-off length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Stanje: novo, Centre length ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Rbjdpfjga Ty Eox Ad Tot Spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1000 kg INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post type Multifix TOOE5 with 4 holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work light and coolant system * Fixed and traveling steady rest HEAVY-DUTY DESIGN WITH CAST IRON BASE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei Injection Moulding Machine KM 300-1000 C2 Year of manufacture: 2006 Clamping unit: Clamping force: 3000 kN Maximum mould opening force: 160 kN Movable platen shifting force (Opening): 86 kN Movable platen shifting force (Closing): 68 kN Mould platen size (H x V): 995 mm x 1050 mm Tie bar spacing (H x V): 630 mm x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Injection unit: Screw diameter: 55 mm Ls/D ratio: 20 Rodpfsrbhhhsx Ad Tobt Injection pressure: 1904 bar Injection volume: 523 ccm Shot weight, PS: 476 g Injection rate: 428 ccm/s General data: Dimensions (L x W x H) m: 5.97 x 2.04 x 2.36 Weight t: 12.5

Leto izdelave: 2003, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 50/140/03, GENERAL FEATURES Grinding Wheel Dimensions (OD x ID x width): 508 mm Rbodsd Nw T Ijpfx Ad Tot Regulating Wheel Width: 254 mm Dressing Speed: Ø508 x 254 mm Lubrication (Auto/Manual): centralized automatic / automatic lubrication CNC Brand: FANUC CNC Model: Series 18i - T Number of CNC Axes: 8 Grinding Wheel Width: 254 mm ELECTRICAL SPECIFICATIONS Total Power: 25 kW Voltage: 220/380 V DIMENSIONS AND WEIGHTS Length: 2150 mm Width: 2200 mm Height: 3400 mm Weight: 8000 kg

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 62.235 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Key technical data: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL Rjdevxzw Nspfx Ad Tsbt - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal arrangement - Extraction cell with machine enclosure - Carton board feed - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This layout also offers advantages for automation, as robots and peripheral equipment can be integrated more easily. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process management. The servo-hydraulic technology ensures energy-efficient operation and reduces cooling water requirements. Additionally, the machine is fitted with a MORETTO dosing unit and an ENGEL linear handling system, supporting production automation and increasing overall productivity. With a total of 62,235 operating hours, the machine is in used but operational condition.

Stanje: rabljeno, A N G E B O T Wir können Ihnen ab Lager, Irrtum und Zwischenverkauf vorbehalten, unverbindlich anbieten: TSCHUDIN (CH) Spitzenlose Rundschleifmaschine Typ TC-300 Baujahr 2001 Schleifbereich – Ø 0,5 – 25 mm (30) Werkstücklänge beim Einstechschleifen 125 mm (140) Werkstücklänge beim Durchlaufschleifen 300 mm Schleifscheibenmaß: Ø x Breite Ø 300 x 125 mm (140) Regelscheibenmaß: Ø x Breite Ø 225 x 125 mm (140) Schleifscheiben-Umfangsgeschwindigkeit 35 m/sec Schleifscheiben-Zustellung 3 mm Regelscheibendrehzahlen stufenlos 0 – 444 U/min Neigung der Regelscheibe Grad Schleifscheibenantrieb ca. 7,5 kW Gesamtantrieb ca. 13 kW - 380 V - 50 Hz Gewicht 2.500 kg Zubehör / Sonderausstattung: • Die Maschine arbeitet mit einer festen Werkstückposition, wodurch sowohl Schleifspindel- als auch die Regelspindel-Einheit verstellbar sind. Dies vereinfacht die Einstellung der Maschine sowie die automatische Be- und Entladung der Werkstücke. • SIEMENS SPS-Steuerung für den automatisierten Arbeitsablauf mit SIEMENS Touchscreen. Die komplette Elektrik und SPS-Steuerung wurden 2016 erneuert! • Elektromechanische Kopier-Abrichteinrichtung für die Regelscheibe • Regelscheiben- und Schleifscheiben-Drehzahlen sind stufenlos regelbar. • Verstellbare, aufgebaute Werkstück-Einstech-Führungsbrücke mit montierter Einstech-Werkstückauflage • Elektromechanisch ansteuerbarer Werkstück-Einstoßer & automatischer pneumatischer Werkstück-Ausstoßer • Zusätzlicher Ausfahrzylinder zum automatischen Abkippen der Werkstücke nach dem Einstechschleifen (einstellbar 4 – 30 mm) • Die Maschine ist vorbereitet für den Einsatz mit einem HELP-TEC Hublader MSHL08/400P, dieser ist jedoch derzeit nicht vorhanden. • Komplette Umhausung des Arbeitsbereichs mit Überwachungstechnik. • Separater Schaltschrank, Bedienungsanleitungen sowie Elektroschaltpläne des Retrofits. Zustand: Sehr guter Zustand! Die Maschine wurde 2016 mit neuer Elektrik ausgerüstet! Bitte klicken Sie hier für ein Video der Maschine: Lieferung: ab Lager, sofort verfügbar, FCA Metzingen Zahlung: rein netto – nach Rechnungserhalt Wir führen stets eine große Auswahl an Schleifmaschinen am Lager – bitte sprechen Sie uns auf Ihren Bedarf an! QUOTATION We are pleased to offer you ex our stock, subject to prior sale and technical error: TSCHUDIN (CH) Automatic precision centerless grinding machine Model TC-300 Year of manufacture: 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding: 125 mm (140) Max. workpiece length for through-feed grinding: 300 mm Grinding wheel dimensions: Ø x width 300 x 125 mm (140) Regulating wheel dimensions: Ø x width 225 x 125 mm (140) Grinding wheel peripheral speed: 35 m/sec Grinding wheel infeed: 3 mm Regulating wheel speed, infinitely variable: 0 – 444 rpm Regulating wheel inclination: Degree Grinding wheel drive approx. 7.5 kW Rodjwftt Uepfx Ad Tobt Total connected load approx. 13 kW - 380 V - 50 Hz Weight: 2,500 kg Accessories / Special Features: • The machine works with a fixed workpiece position, making both the grinding spindle unit and the regulating spindle unit adjustable. This simplifies adjustment of the machine and facilitates automatic workpiece loading and unloading. • SIEMENS PLC control for automated operation with SIEMENS touchscreen. Complete electrics and PLC newly installed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating wheel and grinding wheel speeds are infinitely variable • Adjustable plunge guiding bridge wi