Stroj za brizganje več materialov

ENGEL ES650H/200W-200HL-2F

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 98.780 h, vpenjalna sila: 2.000 kN, skupna masa: 12.200 kg, proizvajalec krmilnikov: ENGEL, model krmilnika: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie bar spacing of 920 x 750 mm. The machine is equipped with two injection units, screw diameters of 40 mm and 25 mm, and rotary table control. Take advantage of this opportunity to purchase this hydraulic injection molding machine Engel ES650H/200W-200HL-2F. Contact us for more information on this machine. • Clamping unit • Mold weight (max.): 1500 kg • Moving total weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter, A-side: 110 mm • Centering ring diameter, B-side: 90 mm • Clamp system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (main) - Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle opening: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (secondary) - Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 Cjdpfxjyf H Nns Afnogp • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Pump motor: ~6.8 kW • Machine axis travels • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / process control: Yes • Pressure interface: Yes • Second injection cylinder: Yes • Mold monitoring: No • Internal mold pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition: • Well maintained and serviced Additional equipment • Engel linear extraction robot ERC 23/1-E (included)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. Codjthd Shepfx Afnsgp - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. Cjdpfx Afsyf Htyonsgp • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm • Max. mould dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and a platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideal for precision hydraulic injection molding. Contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Minimum mold height: 500 mm • Opening stroke: 750 mm • Maximum daylight (distance between platens): 1,150 mm • Maximum mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm Cgedpfx Aoyfrb Nsfnep • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Csdpfxjrthkuo Afnjgp Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Arburg 270 M-350-90 U Schließkraft: 35 t Baujahr: 1997 Schneckendurchmesser: 25 mm Holmenabstand: 270 x 270 mm Cgedpfx Aog S I S Asfnop

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Schnecke: 22 mm Baujahr: 2004 Betriebsstunden: 200 Codpoh Rawbofx Afnjgp

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, številka stroja/vozila: 1005/40200317/2010, barva: siv, Perfect machine in every respect, ready for immediate production. Composed of: - Drawer-style feeder - 3 sheet feeders, including: - 1 with launch discs Codeuxmlispfx Afnjgp - 1 double-feed unit for simultaneous double insert feeding - 1 pivoting unit (90 degrees) for in-line insert feeding in the direction of travel - Gluer combined with electronic labelling machine for address insertion from 1 to 4 inches, 2 to 4 tracks, also suitable for bank statements - Packaging machine equipped with film tensioning system for minimizing bag slack - Stacker for product collection and counting, with side ejection and mechanical outfeed conveyor.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Csdpfxoh Nypfs Afnogp

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Csdpfx Afop Audqonegp Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002