Okrasite Barbie House GL 18

Versch GL 18

Stanje: generalkompletno obnovljen (rabljeno), Na voljo gumarska testna oprema 1 x reometer Alpha Production MDR (po želji v kontejnerju s pnevmatskim vzorčevalnikom) Naprava je preverjena, kalibrirana in opremljena z novo programsko opremo na novem tower računalniku! Dcodpowmnlhofx Aahjl

Stanje: dober (rabljeno), Redko na voljo: stroj za izdelavo vrečk Toyo Jidoki, neposredno od nedavno zaprtega proizvajalca omak, juh in koncentratov. Stroj je polnil te izdelke v stoječe, retortne vrečke. Nov kupljen leta 2007. Dcedjqudivepfx Aahjl

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BELOW Equipment / further details: Dcedpevf Iubsfx Aahjl With heating for embossing Also very interesting for the textile industry

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Djdeg Emvhjpfx Aahecl Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight: approx. 90 g

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The granulate mixer is available in 6 versions: The design can be either in stainless steel or painted steel. Dsdod R Atropfx Aahecl Technical specifications: MV 2 The MV 2 enables complete mixing of the entire plastic granulate, thanks to the forced feed via the screw sleeve. Container capacity: 120 kg / 200 L Dimensions (L x W x): 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Removable screw - Mixing time control system - Extraction unit - 1 discharge outlet - Mobile frame with castors, 100 mm diameter, all with locking brakes.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Dedpfxjh Akm Ts Aahocl

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Djdpfskucxljx Aahscl Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: pripravljen za uporabo (rabljen), Inkjet printer for frame bending machine Length: 800 mm Width: 1000 mm Dsdpfx Aashzgtuehscl Height: 1900 mm Weight: approx. 100 kg

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO126, Used HDPE extrusion blow molding system for 10 L – approx. 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single-parison head and robust clamping unit, this EBM unit is ideal for industrial packaging and beverage manufacturing auxiliary facilities (e.g., water cans, edible oils) and can be integrated into a used filling line. Documentation and operating manuals are available. Reference number: SO126. Technical specifications & performance data Key data Manufacturer/model: Uniloy Milacron HSM10/D Year of manufacture: 2000 Technology: Extrusion blow molding (EBM), single parison Material: HDPE Number of cavities: 1 Max. container volume: 10 L Indicative output: up to approx. 300 bph at 10 L (application dependent) Operating manuals: included Reference number: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing output (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; cylinder heating power: 31.4 kW Motor cooling power: 0.58 kW; cylinder cooling power: 1 kW Parison head Type: PE 1/200, single parison Max. die head diameter: 200 mm Head heating power: 14.2 kW Parison wall thickness control: hydraulic (wall thickness programming) Clamping & blowing unit Clamping force: 200 kN Max. mold size: 650 × 500 mm (H) Mold thickness: 2 × 150 mm Mold opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption approx. 104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Oil tank capacity: 400 l Pump flow rate (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooler motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air demand: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air demand: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; flow rate 15 m³/h Extruder & hydraulic oil cooling: 10–24 °C; flow rate 4 m³/h Dimensions & weights Approx. machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator position: < 85 dB(A) Advanced automation & control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top load for 10 L containers. Proprietary Uniloy command and control software (version code available in manuals) with HMI for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated die head for stable processing at up to 300 °C transformation temperature. Interlocked safety guards and emergency-stop switches for safe operation. Djdpfsyhbt Hsx Aahjcl Capabilities for integration into the production line

Leto izdelave: 2025, stanje: novo, Standard configuration with column Motorized height adjustment 700 mm Dedpfx Aaegn Tzlshecl Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information