Engel ES650H/200W-200HL-2F

Engel ES650H/200W-200HL-2F

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes Hodpfx Abeyf Htys Ejfd • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm • Max. mould dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Hjdpfx Aothd Shsb Eefd Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 98.780 h, vpenjalna sila: 2.000 kN, skupna masa: 12.200 kg, proizvajalec krmilnikov: ENGEL, model krmilnika: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie bar spacing of 920 x 750 mm. The machine is equipped with two injection units, screw diameters of 40 mm and 25 mm, and rotary table control. Take advantage of this opportunity to purchase this hydraulic injection molding machine Engel ES650H/200W-200HL-2F. Contact us for more information on this machine. • Clamping unit • Mold weight (max.): 1500 kg • Moving total weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter, A-side: 110 mm • Centering ring diameter, B-side: 90 mm • Clamp system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A side) • Rotary table control: Yes • Index plate control: Yes Hfjdpfx Abjyf H Nne Esd • Injection unit 1 (main) - Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle opening: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (secondary) - Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Pump motor: ~6.8 kW • Machine axis travels • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / process control: Yes • Pressure interface: Yes • Second injection cylinder: Yes • Mold monitoring: No • Internal mold pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition: • Well maintained and serviced Additional equipment • Engel linear extraction robot ERC 23/1-E (included)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljena dvo-komponentna brizgalna stiskalnica z robotom Proizvajalec: ENGEL Hedpfx Abjyak A Is Ejfd Tip: ES650H/200W-200HL-2F Leto izdelave: 2004 Zapiralna sila: 200 ton Razmik med stebri: brezstebrna izvedba Minimalna vgradna višina: 500 mm Odpiralna pot: 750 mm Polž DN 1: 40 mm Maks. volumen brizga: 251 cm³ Teža brizganca v PS: 216 g Polž DN 2: 25 mm Maks. volumen brizga: 69 cm³ Teža brizganca v PS: 60 g Krmiljenje: CC100 Tehnična oprema: -Robot Engel, tip: ERC23/1-E -4x izvleki jeder -Krmiljenje vrtljive mize

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm Hfodpfx Abjp Audqe Esd MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Stanje: dober (rabljeno), Leto izdelave: 2006, vpenjalna sila: 800 kN, Totale aangesloten belasting: 21,7 kW Pompmotor: 18,50 kW Hjdpfsvu Dncox Ab Eefd Gewicht: 7.400 kg

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water Hfsdpfog Ey Ufex Ab Eed - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, Leto izdelave: 2025, General: Hfedpfoddv Itex Ab Esd - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Vi har nu 13 SSI Schaefer SLL LogiMat vertikala lyftmoduler från 2019 till salu. Dessa maskiner är i mycket gott skick och har servats årligen av tillverkaren sedan de installerades. Tack vare regelbundet underhåll och varsam användning är maskinerna fortfarande mycket driftsäkra. Dessa vertikala lyftmoduler är utformade för att ge maximal lagringskapacitet på minimal yta. Brickstorlek: 4 025 mm bred × 815 mm djup Brickyta: Cirka 3,3 m² Antal brickor per maskin: Cirka 49 Total lagringsyta per maskin: Cirka 160 m² Upptagen golvyta per maskin: Endast 14,12 m² Hfsdpfxowi Iywo Ab Eod Varje maskin är utrustad med en valfri ljuspekare, som tydligt visar plockpositionen. Det här ökar både hastigheten och säkerheten vid orderplockning. För att använda ljuspekaren krävs anslutning till ERP- eller WMS-system. Maskinerna har endast kört cirka 30 000–60 000 cykler vardera – vilket motsvarar ungefär 1 till 2 års normal användning. Maskinernas höjd är 8 200 mm men de kan anpassas till ert lagertaks höjd vid installationen. Specifikationer – SSI Schäfer LogiMat SLL vertikal lyftmodul Tillverkare: SSI Schäfer Modell: LogiMat SLL 4025-815-8200/400 Tillverkningsår: 2019 Skick: Mycket bra – årligen servad av tillverkaren Antal enheter: 13 Höjd: 8 200 mm Bredd (maskin/brickor): 4 570 mm / 4 025 mm Djup (maskin/brickor): 3 092 mm / 815 mm Upptagen golvyta per enhet: 14,12 m² Antal brickor per enhet: Ca 49

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.108 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, premer vijaka: 25 mm, delovna prostornina: 79 cm³, tlak vbrizgavanja: 2.398 letvica, izmetalna sila: 6.100 N, hod izmetalca: 100 mm, odmični hod: 606 mm, dolžina plošče: 750 mm, širina plošče: 850 mm, skupna masa: 10.600 kg, Oprema: dokumentacija / priročnik, Tehnične podrobnosti Proizvajalec: Engel Model: V 330H/80V/130 Combi Cleanroom Leto izdelave: 2006 Obratovalne ure: 33.107 h Vijaka: 25/22 mm Teža stroja: 10.600 kg Hjdpfot A Ui Aex Ab Eefd Dodatna oprema vključena: GEKU SR 500 ST robot Zaščitna kletka Vrtljiva miza Stroj je v avtomatskem načinu deloval skoraj 33.107 ur. Zadnje informacije – Davčni nasvet in prednost za rabljene stroje Od 01.07.2025 dalje je mogoče tudi za rabljene stroje uveljavljati poseben letni odpustek v višini 30 %. Poleg nižje cene v primerjavi z novim strojem lahko uveljavljate enake odpise kot pri novem stroju. Ključna beseda: pospeševalnik rasti (§ 7 odstavek 2 EStG-E)