Stroj za mehko oblikovanje robov

ELWOOD Edgeline Soft

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Cedpfx Aegtm U Aepljrb Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 Crsdpfx Apeilqvrelsb The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Crsdpfsi E Trpex Aplob

Stanje: dober (rabljeno), Throughfeed line for processing door leaves, high-performance machine, processing of one leaf—lock case, handle, and hinges—in approximately 30 seconds. Cedpfjuq Scpox Aplsrb The machine consists of two units, each with a left and right section performing specific operations. In the first unit, the left section mills the faceplate recess for the lock and drills holes for the handle and key; simultaneously, the right section drills the hinge holes. In the second unit, the left section makes and deepens the lock pocket, while at the same time the right section installs the hinges.

Leto izdelave: 2026, stanje: novo, Fully automatic horizontal packaging machine SPINNER 1800s Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: Crsdsfzrhdspfx Apljb - right-hand side in the direction of product flow General technical data: - Main motor output: 3 kW - Max. ring speed: 40 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake system - Automatic stretch clamp and cutting system - Photoelectric sensor for automatic start of the wrapping cycle - Touch screen for adjusting machine parameters to product requirements - Operator safety systems Optional equipment: - Various sorting conveyors - Infeed and outfeed roller tables - Air bubble film unit Technical features: Wrapping dimensions: - Max. length: unlimited - Min. dimensions (WxHxL): 600 x 450 x 1200 mm Conveyor belt features: - Usable length: 2,300 mm - Total length: 2,450 mm - Working height: 950 mm - Electric motor output: 0.55 kW - Max. speed: 10 m/s - Max. load capacity: 100 kg/m Stretch film specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Roll core diameter: 76 mm - Recommended material thickness: 23, 30, 35 micron

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, skupna dolžina: 7.920 mm, trajanje garancije: 3 meseci, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system, approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR glue and cleaning the system is quick and easy, taking only a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high gloss and super matt finishes! One absolute highlight of the machine is the multifunction package, which proves especially beneficial for operations processing a variety of edge types. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on requirements—from the longitudinal trimming unit and corner copying to profile scraping. The extendable workpiece support and extended infeed area provide additional support when handling large panels. A guidance system assists with feeding small workpieces into the machine. Edge thickness – coil material: 0.4 – 3 mm (material-dependent) Edge thickness – strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min. Glue application with GlueJet using EVA and PUR glue types, with minimal effort. Compatible with all standard edge materials, including high gloss and super matt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue quantity management Ready for integration with RETURN systems Motorized pressure bridge with top belt drive Multifunction units for fast setup – radius, flush, chamfer operations Spraying units, vertical & horizontal Credpox Emf Djfx Apleb and much more. Delivery, installation, and machine training can be offered by us for an additional fee. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions (GTC) can be found on our homepage at holzher.de/de/agb.

Stanje: rabljeno, Leto izdelave: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex. The photo shows the system. HAND GUARD is based on early hazard detection and protects the operator from injuries, functioning at all times. The camera-monitored system first gives the user a visual warning to indicate potential danger. If the risk persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free protection • Fast commissioning • 100% damage-free • Works with concealed cuts • Permanent operation without the need for deactivation • Max. 500 mm saw blade diameter can be fully retracted as standard underneath a single-side tilting saw unit. Tilting range: 0 - 46°, equipped with quick-change system for the main saw blade. Motorized height and tilt adjustment and a maximum blade protrusion of 179 mm. (Partial removal of the scoring unit tool may be required) Additionally, the eye-level control panel allows you to adjust the height and tilt of the saw blade, and depending on the control package, access further functions such as speed adjustment. The new, clear industrial design underscores Altendorf's exceptional position: this panel saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precise guidance. It can be locked steplessly in any position. The large double rollers keep the upper and lower carriage precisely aligned on their respective guide bars. This excellent running quality is maintained even after decades of heavy use and contamination. The carriage design provides exceptional torsional and structural rigidity. Also included is a front support roller 300 mm wide, helpful when cutting long workpieces at the rip fence, positionable at 90° under the double roller carriage. 12" touchscreen with integrated keypad • Automatic dimension correction at the rip and crosscut fence when tilting the saw unit • Stepless fine control of axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last input (back function) • Conversion from tip to blunt measurements at rip and crosscut fences • Shift cut function with automatic calculation of missing angles or dimensions • Extended tool management for up to 100 tools • Storage of scoring position (3-axis scorer) • Storage of main tool body thickness & cutting width • Storage of main tool speed Additional functions • Grooving: automatic stepwise positioning of the rip fence • Chain dimension function: consecutive cuts with identical distances at the rip fence • Mitre cut with oversize • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles/dimensions • False mitres, calculation of missing angles/dimensions • 9999 cut programs can be stored • Standard remote maintenance preparation • Template holder directly beside the touchscreen Accessories included in the Edition Single Flex: • Double roller carriage with a carriage length of 3000 mm Csdeyyap Ejpfx Aplorb • Vario drive 5.5 kW (7.5 HP) VAR

Stanje: rabljeno, CNC obdelovalni center BIESSE Rover C 6.50 CONF.2, letnik 2007. Crsdsw Rpd Sepfx Aplsb -Delovna površina: cca 140 × 460 cm -Dimenzije stroja: 300 × 650 cm -Masa (teža) pribl. 6100 kg -Dve delovni glavi -Magazin: 22 mest -Vertikalni svedri: 28 kosov -Bočni svedri: 12 kosov Cena po dogovoru, na voljo takoj. Cena je brez DDV.

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW Codpfx Apowvqklolerb • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Filter za izsesavanje prahu in žagovine. Cedpfx Aotzld Ueplorb