Obdelovalni center Elumatec SBZ 140

Elumatec SBZ 140

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. profile length with 3-sided machining: 7,600 mm, Y-axis travel: 845 mm, Z-axis travel: 620 mm, max. traversing speed X-axis: 63 m/min, max. traversing speed Y-axis: 60 m/min, max. traversing speed Z-axis: 60 m/min, A-axis swivel range: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2-layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for job/machining data input and documentation. Regularly maintained, on-site inspection possible. Hnedszbb Rrjpfx Abner

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Hodpewwtw Dofx Abnenr Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 11.000 W, število osi: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. With a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, it is suitable for machining aluminum and thin-walled steel profiles. The machine features an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you're looking for high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining center we have for sale. Contact us for further details. Hnsdpfozaq Eiox Abnjr • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining area: 0°-180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travel: • A-axis rotation: 0°-180° • Programming increment for A-axis: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: air-cooled • Tool magazine: 8 positions, traveling for fast tool change, expandable system • Machine features: Stationary profile processing, fast automatic tool change, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15" color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum operation / 2 working zones (optional configuration)

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osno CNC obdelovalni center za obdelavo profilov Elumatec. Različica: 6,4 m, gib X/Y/Z: 7720 mm/845 mm/620 mm, maks. dolžina obdelave na čelni strani/brez obdelave na čelni strani: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, maks. hitrost vretena: 24000 vrt/min, vpenjalni sistem orodja: HSK-63F, število mest za orodja: 8, število vpenjalnih naprav: 8, dimenzije stroja X/Y/Z: pribl. 11250 mm/3400 mm/2950 mm, teža: pribl. 7400 kg, delovni čas glede na proizvodni načrt: pribl. 42200 ur. Stroj nima ura za merjenje delovnega časa. Dokumentacija je na voljo. Možen je ogled stroja na licu mestu. Hjdpoy Aafxefx Abnjnr

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Hnodpfx Aegyy I Asbnjr Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 7.600 mm, številka stroja/vozila: 1400040505, število osi: 4, TEHNIČNE PODROBNOSTI Maksimalna dolžina obdelave s končno obdelavo: 7.600 mm Maksimalna dolžina obdelave brez končne obdelave: 7.720 mm Hnedpfx Abozhuyfjnsr OPREMA 12 pnevmatičnih vpenjalnih glav 2 delovna območja 4-osno obdelovalno središče za profile; brezstopenjska obdelava med -90° in +90° s katerim koli razpoložljivim orodjem Avtomatsko pozicioniranje vpenjal s sistemom za absolutno merjenje Dve ločeni obdelovalni coni za ciklično obdelavo 4-osno upravljanje 18,5-palčni barvni monitor, USB-priključki in omrežni priključek Operacijski sistem Windows Programska oprema EluCam Avtomatsko merjenje dolžine profila (na obeh straneh) Čitalnik črtne kode Sistem za shranjevanje orodij, ki se premika skupaj z obdelovancem, zagotavlja kratke čase za menjavo orodij in s tem optimalne cikle obdelave; Sistem lahko sprejme osem orodij. 8 nosilcev orodij z vpenjalnimi glavami

Leto izdelave: 2003, stanje: rabljeno, 4-osni obdelovalni center z 8-pozicijskim avtomatskim menjalcem orodja za aluminijaste ali PVC profile Maks. dolžina obdelave: 6.400 mm Pomik po Y-osi: 850 mm Pomik po Z-osi: 650 mm Kot vrtenja A-osi: 0° - 180° maks. Največja hitrost: 21.000 vrt/min Operacijski sistem Windows Minimalno mazanje s pršenjem Spoznava in samodejno premikanje prijemal Hnedpfxjuwq S Ds Abnsr Transportni trak za ostružke v ležišču Odvod ostružkov Nihalno delovanje z dvema varnostnima svetlobnima barierama Nakladanje je vključeno v ceno Teža: ca. 4.500 kg V zelo dobrem stanju

Stanje: rabljeno, Double-head mitre saw – FOM ALVA 450 B Professional double-head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Widia-tipped blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct drive: motor to widia blade Blade shaft diameter: Ø 32 mm Head tilting: 90°   45° outward   22.5° outward   Intermediate angles via mechanical stops and reading on graduated vernier First head fixed Second head movable: automatic positioning with optional manual mode Movable head automatic positioning speed: 12 m/min Movable head positioning accuracy: +/- 0.1 mm Minimum cutting length between heads: 300 mm (reducible by optional program) Maximum cutting length between heads: 4000 mm Hydropneumatic widia blade feed (adjustable feed speed – rapid return) Separate electric control panel from pneumatic system Dual servo-controlled operating pressure at low pressure Air consumption per working cycle: 28 normal litres Vertical and horizontal pneumatic clamps Misted lubrication of the cutting area Provision for chip and fume extraction (1) Operating pressure: 7 bar (adjustable) Mobile head roller conveyor (3 m) Hnedpfsyyliksx Abnor Machine in working condition.

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Hnjdpey Ah Tksfx Abner Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj je v zelo dobrem stanju. Dolžina 7,6 metra, 2 delovni mesti. Možna je do 6-mesečna garancija. Hnjdpfx Abjyia Ezjnor

Stanje: rabljeno, Leto izdelave: 1979, Swing diameter over bed: 480 mm Swing diameter over cross slide: 200 mm Turning length: 650 mm Maximum swing diameter over bed cover: 200 mm Centre distance: 750 mm Spindle head: Size 6 Spindle bore: 58 mm Total power requirement: 18 kW Machine weight approx.: 2.7 t Hedpfx Abedmbrxsnenr Space requirement approx.: 2.70 x 1.58 x 1.68 m CNC path control, 2 axes, SINUMERIK 5T with thread cutting, tailstock quill taper Morse 4, maximum quill stroke 200 mm, tailstock travel 550 mm Control cabinet 80 x 40 x 230 cm Weight: 150 kg Motor control cabinet with Siemens 810T, dimensions W/D/H 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax screws + sheet metal screws Drilling machine, drill bits

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040164, dolžina obdelovanca (maks.): 7.900 mm, največja hitrost vretena: 21.000 obr/min, Vretenov motor je bil pred nekaj leti v tovarni popolnoma obnovljen in je bil od takrat v uporabi le približno 100 ur. TEHNIČNI PODATKI Dolžina obdelovanca: 7.900 mm Hitrost vrtenja: 21.000 min⁻¹ PODATKI O STROJU Pnevmatski sistem Tlak: 8 bar Električni podatki Tip priključka: 3/PEN Napetost: 400 V Frekvenca: 50 Hz Tok: 24 A Hjdpfx Asxy Hciebnjnr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.280 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, zasukni kot osi A (maks.): 180 °, DÉTAILS TECHNIQUES Longueur d’usinage max. sans usinage de faces d’extrémité : 4 200 mm Longueur d’usinage max. avec usinage de faces d’extrémité : 4 080 mm Hnjdpfjw Svmisx Abnor Courses Course axe X : 4 200 mm Course axe Y : 850 mm Course axe Z : 650 mm Vitesses de déplacement Vitesse de déplacement axe X : 65 m/min Vitesse de déplacement axe Y : 60 m/min Vitesse de déplacement axe Z : 60 m/min Angle d’inclinaison axe A : 0° - 180° Précision de positionnement Précision de positionnement axe X : ± 0,1 mm Précision de positionnement axe Y : ± 0,1 mm Précision de positionnement axe Z : ± 0,1 mm Précision de positionnement axe A : ± 0,1° Vitesse de rotation max. de la broche : 24 000 tr/min Puissance nominale de la broche : 7 kW S1 Porte-outil : HSK-F63 Diamètre max. de fraise : 80 mm Diamètre max. de fraise à disques : 200 mm DÉTAILS MACHINE Consommation d’air : env. 180 l/min Poids de la machine : 4 200 kg Heures de fonctionnement Heures broche : 1 280 h Heures machine : 13 066 h

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Hedpfx Aouiy Hrobnonr Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Leto izdelave: 2010, stanje: rabljeno, 4-osni obdelovalni center z 8-mestnim avtomatskim menjalcem orodij za aluminijaste ali PVC profile Največja dolžina obdelave: 3.100 mm Pomik Y-osi: 850 mm Pomik Z-osi: 650 mm Nihajni kot A-osi: 0° - 180°, največja hitrost vrtenja 21.000 min⁻¹ Teža: približno 3.000 kg Hnedpfx Absxvp Nkenjr Operacijski sistem Windows 7, minimalno mazanje Zaznavanje in samodejno premikanje vpenjal, 6 pnevmatskih vpenjal za material Nakladanje je vključeno v ceno