Skladiščno dvigalo

Electrolux IPN7000

Leto izdelave: 2017, Stanje: rabljeno, Die vielseitige Kontrollwaage CWEmaxx eignet sich für hohen Durchsatz. Der Allrounder unter den Kontrollwaagen kann für zahlreiche Anwendungen eingesetzt werden und ermöglicht dank ihrer IP-Schutzart das Verwiegen unterschiedlichster Produkte. mit 12,1’’ Touchscreen Wägebereich: 3000 g / 6000 g Kljdpeuf H Axjfx Af Nel Teilung: d=1 g / 2 g

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm Kledpfxsw Dvkae Af Nsl - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3806, dolžina brušenja: 600 mm, širina brušenja: 250 mm, premer brusilnega koluta: 250 mm, hitrost vretena za brušenje: 3.000 obr/min, moč: 3,5 kW (4,76 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, JUNG JF520 - workshop-refurbished Mechanically and electrically inspected and function-tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor infeed - 3-axis HEIDENHAIN digital readout - Dressing dimension compensation - Magnetic force control Kjdpfswz Hf Nex Af Nsll - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine as a trade-in

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Arburg 370S-800-150 Schließkraft: 80 t Schnecke: 30 mm Holmabstand: 370 x 370 mm Steuerung: S Baujahr: 2005 Klodpfxsidmc Is Af Nol Betriebsstunden: 46.201 h Inklusive Angussabnehmer

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lifting height: 1010 mm Load capacity: 1000 kg Minimum lifting height: 190 mm Connection voltage: 380 V Total power requirement: 0.75 kW Machine weight: approx. 0.22 t Space requirement: approx. 1.3 x 0.8 x 0.2 m The hydraulic lift tables are electrically driven and operated. They are equipped with a contact strip for safe lowering operations. Kodpfxsfrztxs Af Nsll Widely applicable for workshops, assembly departments, loading bays, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of manufacture: 2019 Axes: 6 Reach: 1441 mm Klodpfx Afet Rwwre Nol Payload: 12 kg Fanuc System R-30iB Plus robot controller and housing measuring 2 m x 2 m x 2.7 m (without Kemper extraction system)

Stanje: pripravljen za uporabo (rabljen), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No lead time, available immediately Inspection possible by appointment Kjdpju Ti Srofx Af Nsll Machine is disconnected / No cooling water connection Machine is professionally stored Technical specifications: Clamping force: 800 kN Mounting plate dimensions (mm): 610×610 Tie bar distance (mm): Mould height (mm): 250 Platen opening (mm): 750 Control system: MC4 Display language: German Injection unit screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil filling volume (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available upon request.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, For sale is an injection moulding machine from the brand Netstal, model Synergy 1000-230. After a transport accident, the control cabinet is completely defective; for this reason, the machine is being offered as a spare parts donor or for repair. The machine would otherwise be fully operational and in good condition. Technical data: Operating pressure: 210 bar Injection force: 182 kN Clamping force: 1000 kN Opening stroke: 0-400 mm Mould installation height: 450-750 mm Total weight: 7,200 kg Operating hours: approx. 53,000 Available from March 2024. Initial hydraulic oil fillings can be ordered from us. Upon request and for an additional charge, loading and transport (Europe-wide) can be organised. Prices plus VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Ksdsrfbnmjpfx Af Nell Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: novo, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternoster and storage lifts as of 31 December 2023. After this date, the company will no longer provide support or spare parts. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Please feel free to contact us at any time. Klsdoiy Dw Hspfx Af Njl

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 650 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 230 mm, največja hitrost vretena: 3.000 obr/min, For sale is a surface grinding machine of the brand Okamoto, model PSG 52 UDX. The machine is well-maintained and immediately operational. Technical data: Kledpewnnbrefx Af Nel Year of manufacture: 1989 Grinding area: X-axis: 650 mm (manual) Z-axis: 230 mm Y-axis: 47 mm – 400 mm Maximum vertical movement under the edge of a new wheel (with Ø 205 mm), min./max. – table) Grinding wheel Ø: Maximum Ø 225 mm Speed range: 3,000 rpm (infinitely variable speed control) Table feed: 0.3 – 25 m/min (hydraulic on the X-axis) Ground table area: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (Maximum load including magnet: 200 kg) Transport and loading can be organized Europe-wide upon request, subject to additional charge. Prices plus VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell one? For more information or contact options, please visit our website.