Hladna krožna žaga

EISELE VMS III-PV

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 & 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment/features: - Semi-automatic vertical cold circular saw - Pneumatic quick-acting material clamping device - Infinitely variable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a highly stable rectangular guide - User-friendly and stepless lifting adjustment of the sawing unit via clamping lever - Generously dimensioned gearbox - Equipped with Eisele rotation compensation for extended saw blade lifetime - Easy saw blade changeover - High productivity while requiring minimal floor space (less than 1 m²) - Coolant system integrated in the machine base Lhedpfx Adet A Ar Sekjd Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested/inspected under power on site by arrangement. All specifications are subject to change. Prior sale reserved. The item is sold under exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, body, or health.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), Zapiralna sila: 220kN, minimalna višina orodja: 200mm, maksimalni hod odpiranja: 200mm, maksimalna razdalja med ploščami: 400mm, hod izmetalca: 80mm, dimenzije stroja (D/Š/V): cca 2600mm/800mm/1600mm, teža: cca 760kg. Ogled na lokaciji je možen. Lhsdpfx Adjw R Dg Uoked

Stanje: rabljeno, Leto izdelave: 1985, Saw blade dimensions Ø 320-350 x 3.0 mm Cutting range 120 mm Cutting range at 90 degrees: square 90 x 90 mm Cutting range at 90 degrees: flat 200 x 90 mm Cutting range at 45 degrees: flat 140 x 90 mm Working height 925 mm Saw blade speeds 17 / 34 rpm Compressed air 6.0 - 8.0 bar Motor speed 1400 / 2800 rpm Ledpoxacbnefx Adkshd Total power requirement 2.0 / 2.6 kW Weight 470 kg Dimensions L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) Well-maintained condition (!!) Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick-release clamping device - Infinitely adjustable saw blade feed - Convenient mitre adjustment with fixed stops - Convenient lifting adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade replacement - High productivity with minimal space requirement (less than 1 m²) - Coolant system * Machine link: ?machineno=1008-9164094

Stanje: rabljeno, Leto izdelave: 1975, Premer žaginega lista 350 mm Območje reza pri 90 stopinjah: okroglo 120 mm Območje reza pri 45 stopinjah: okroglo 100 mm Območje reza pri 90 stopinjah: plosko 150 x 110 mm Območje reza pri 45 stopinjah: plosko 120 x 100 mm Moč motorja 1,8 / 2,6 kW Dolžinski omejevalnik 500 mm Lhedpfjw Nrvbjx Adksd Teža 450 kg Dimenzije D x Š x V pribl. 1100x710x1850 mm Polavtomatska vertikalna hladna krožna žaga s pnevmatsko napravo za vpenjanje in podajanje 4 hitrosti žaginega lista (2 preko motorja / 2 preko menjalnika): 11/22/44/88 min⁻¹ Integrirano črpalko za hladilno tekočino

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Lhodpfx Adju Uuakjkjd Technical data: Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Lsdpfx Adsw Dvivskjhd Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.

Stanje: dober (rabljeno), CHIRON FZ 08 KS Magnum je 5-osni obdelovalni center, zasnovan za preciznost, visoko natančnost in zanesljivost. Pomiki osi X450×Y270×Z310 mm; vrtanje 12 mm; rezanje navojev M8. Magazin z 24 mesti, max. Ø orodja 47 mm (100 mm prosto), L 160 mm, masa orodja 1,2 kg. HSK‑A40 0–36.000 min⁻¹; vreteno 7 kW; hitri pomik 75 m/min; 3×400V 50Hz; stisnjen zrak 6 bar; moč 14 kW (19 kVA); teža ≈3400 kg; mere 2308×1405×2447 mm. Oprema: detekcija loma orodja, RS232, klimatska naprava za elektroomarico, signalna luč. Primeren za ozke tolerance v avtomobilski, letalski, medicinski industriji in urarstvu. Lhedpfjxx U Nzox Adksd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, ink accessories, tool holders, documentation Ljdpfx Aswqq Awjdkohd

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), A total of six used injection moulding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 35 g/PS, screw diameter: 22 mm, centering hole diameter: 110 mm, mould opening stroke: 330 mm, control unit: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700 kN, screw diameter: 40 mm, centering hole: 125 mm, mould height min./max.: 190 mm/420 mm, tie bar distance X/Y: 305 mm/135 mm, mould opening stroke: 250 mm, control unit: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700 kN, injection pressure: 1,500 bar, shot weight: 117 g/PS, screw diameter: 35 mm, centering hole: 125 mm, mould height min./max.: 200 mm/400 mm, tie bar distance: 305 mm. 4) Arburg 221-75-350, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, screw diameter: 22 mm, centering hole: 110 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 221 mm. 5) Arburg 221-55-250, year of manufacture: 1991, clamping force: 250 kN, shot weight: 32 g/PS, screw diameter: 20 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 320 mm. 6) 2-component injection moulding machine Arburg 221-75-350, year of manufacture: 1993, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 38 g/PS, screw diameter: 22 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 221 mm. Included: 7-8 Arburg dryers, various injection units, AirComp compressor, liquid silicone mixing unit with Arburg control and Scheugenpflug. Documentation available. Inspection on site is possible. Ledpevb Hbfofx Adkohd

Stanje: dober (rabljeno), Leto izdelave: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, through-spindle coolant (IKZ), linear guides, and 30-position tool changer Table size 2 x 1000 x 450 mm Tool holder DIN 69871 ISO 40 Travels X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm Spindle speed range 50 – 10,000 rpm Table load capacity 600 kg Feed rate, X/Y/Z, stepless - 10000 mm/min Rapid traverse in all axes 30 m/min Drive power 18.5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm Weight approx. 6700 kg Accessories / Special Features: • CNC contouring control SIEMENS 840 D • Dual pallet changer • 30-position automatic tool changer Lhodpfjd I R E Nex Adkod • Full enclosure with electrically interlocked safety doors • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller blocks for uniform absorption of high torques in all directions • Ball screw drives in all 3 axes • Meehanite cast iron machine base for precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Hinged belt chip conveyor with integrated coolant system • 4th axis prepared • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel