Eno za vse: žlindra, roba in oksid

EdgeRacer the Grinder G 1500

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Godpfx Aged Ev Upoysip Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Gijdpfx Ajd Ixadegyjp Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Gsdpot Hw Iijfx Agyjip Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2005, 2005 BIESSE ROVER B 4.40 FT CNC obdelovalni center s 3 osmi Tehnične značilnosti na zadnji fotografiji Delovne ure stroja: 45.343 Gedswmdynjpfx Agyoip Ure v avtomatskem načinu (delo): 27.267

Stanje: novo, Leto izdelave: 2024, Laser source: 12 kW Raycus/IPG Giedpfxsi Ar Rus Agysp Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Working area (effective): 1520 x 3050 mm Maximum positioning speed: 120 m/min Maximum acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Maximum table load: 1500 kg

Stanje: novo, NEW MACHINE Gisdpfxeci Tlro Agyop - Wet suction available in steel or stainless steel - Extraction capacity 1,650, 3,750 or 7,000 m³/h - Motor 3, 5.5 or 15 kW

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Godpfxewt Snys Agysip Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Leto izdelave: 1980, stanje: rabljeno, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table size: 875 x 695 mm Ram area: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30–90 spm Gap between uprights: 450 mm Machine weight approx.: 6.2 t Space requirement approx.: 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top): 480 mm Godpfxodlcy Hj Agyjip Further information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * Free-standing control cabinet with touchscreen incl. cabling * New paint finish of individual components when dismantled After the partial overhaul, the machine is safe for manual loading operation at open tooling; prior to delivery, a current UVV safety inspection and brake time measurement will be performed.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 18 t, delovno območje: 30.001.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.600 mm, Zelo dobro vzdrževana in popolnoma servisirana rabljena CNC izsekovalna stiskalnica večjega formata Trumpf 3000 naprodaj Proizvajalec: TRUMPF Tip: TruPunch 3000 (S11) Letnik: 11/2012 Delovno območje: 3000 x 1500 mm - brez ponovnega pozicioniranja Delovni razpon na prečni osi (X): 3000 mm Delovni razpon vzdolž (Y osi): 1600 mm Velik vrat: 1600 mm V celoti z večorodno orodjarsko zmogljivostjo Giedpfx Aoxrnggsgyep Tip S11 Video na voljo na zahtevo

Leto izdelave: 1999, stanje: rabljeno, številka stroja/vozila: 942, - Proizvajalec: Fladder - Tip: Gyro 300 VAC Ex - Delovna širina: 1300 mm - Leto izdelave: 1999 - Število krtačnih glav: 6 kos - Rotirajoča in oscilirajoča brusilna enota - 2 vakuumska ventilatorja - Moč motorja: 7,5 kW - Z vakuumskim transportnim trakom - Električni priklop krmilna omara 1, stroj: 10 kW - Električni priklop krmilna omara 2, vakuumski ventilator: 15 kW - Brezstopenjsko nastavljiv podajalnik: 2 - 10 m/min Gjdpfsvvl H Nex Agyeip - Dolžina: 2070 mm - Širina: 2370 mm - Višina: 2240 mm - Teža: 2300 kg - Ločena krmilna omara, Dimenzije: širina 800 mm, globina 400 mm, višina 1700 mm - Lokacija: na zalogi - Volt, Hz: 400 / 50