Enota obračanja plovila

DUMETA D-CHGK-5-D

Stanje: novo, Load capacity: 5.0 t Workpiece diameter: 100 – 2500 mm Total power requirement: 2 x 0.37 kW Max. payload drive unit: 2500 kg Max. payload idler unit: 2500 kg Table rotation speed: 100 – 1000 mm/min Wheel diameter: 250 x 140 mm Kdsdpfxegvwgco Abxjn Machine weight: approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Kdedslat Hdepfx Abxjn Machine in very good condition

Stanje: novo, Load capacity 5 t Workpiece diameter 100-2500 mm Wheel diameter 250 mm Wheel width 140 mm Kodpfxjfv A Axj Abxodn Total power requirement 0.8 kW Machine weight approx. 0.8 t Space requirement approx. 2.0 x 1.4 x 1.0 m Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Various running rolls available: steel/rubber/polyurethane • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control • Dual foot pedal • 3-year warranty (see warranty conditions) Discount for full rubber wheels: 613 EUR

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. Kedpfx Ajg U Uv Rebxjdn After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence Ksdpfefu Ivzox Abxedn • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush Kdjdpfjilg Hdex Abxsn - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Kdodpfjrpi E Aox Abxjn

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW Kodpfjhlp D Njx Abxodn The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: novo, Model designation Kodpfx Asgvquwebxjdn Shark 332-1 CCS

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Kdodsgbfaxspfx Abxjn Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm